Kastalon, Inc.
Alsip, IL 60803 1810
Apr 16, 2008 Kastalon Mandrel Sleeves allow coil processor flexibility to unwind or rewind coils that are larger than maximum expansion of mandrel. Manufactured from Kastalon Polyurethane®, they are offered in slip-on or bolt-on versions with or without slot for tail gripper. Thin-walled sleeves prevent damage from coil creases, scratches, and marring; thick-walled units enable adjustments of ID size; and dual-durometer versions provide metal-like hard surface against mandrel with softer outer skin.

Nortech Laboratories, Inc.
Farmingdale, NY 11735
Apr 10, 2008 Intended for use with Therma-Kool® hot/cold gel therapy packs and InstaKool(TM) instant cold packs, disposable Blue Easy Sleeves(TM) act as protective barrier between skin and pack and will not interfere with healing process. Sleeves are non-woven, hand-stitched, and non-porous, helping to minimize chance of potentially spreading infectious skin viruses.

Regal Components, Inc.
Clearwater, FL 33762
Mar 27, 2008 Regal ESL H-13 Nitrided Ejector Sleeves, machined from H-13 hotwork die steel, are nitrided on ID and OD surfaces to Rc 65-74 for optimal wear resistance. Offered in 109 standard sizes with IDs from 3/32-¾ in. and lengths from 3-12 in. in 1 in. increments, sleeves can also be produced as specials down to 1/16 in. ID, with varying wall thick-nesses, ID/OD combinations, and lengths to 25 in. Custom front and EDM forms, head flats, vents, and other steels can be provided.

SKF USA, Inc.
Kulpsville, PA 19443
Mar 19, 2007 Offering corrosion resistance, stainless steel Speedi-Sleeves® exhibit surface roughness of 0.25-0.51 mm. Units mount by pressing them over damaged shaft surface and do not require power tools or heating. Shafts up to 8.000 in. dia can be equipped with standard models, while shafts with diameters up to 45.000 in. can use LDSLV chrome-plated, carbon steel sleeves. Speedi-Sleeve Gold version features coating that minimizes rate of abrasive wear in contaminated conditions.

SDP/SI (Stock Drive Products/Sterling Inst)
New Hyde Park, NY 11042 5416
Dec 07, 2005 Split square hole sleeve Series A 7C19 is suited for producing tooling such as milling cutters or boring bars without broaching equipment, while split square hole bushing Series A 7C18 fits any mating size collet or 3-jawed chuck. Sleeves are cold-rolled steel C1117 and range in length from ¾-5 in. Bushings are 4140 steel and hardened to Re 40-45. Broached square holes, which range from .128-1.260 in., accommodate 12 tool bit sizes from 1/8-1¼ in.

SDP/SI (Stock Drive Products/Sterling Inst)
New Hyde Park, NY 11042 5416
Dec 06, 2005 Available in 8 different lengths from ¾-3¼ in., carbon steel Series A 7C20 can be used as sliding couplings, extensions for socket drives, bearing carriers, and as sliding bearings. Broached hex holes maintain tolerance of ±.001 in. and range in width across flats from .128-.628 in. Sleeves can serve as replacement in applications requiring spliced shafts and bushings, where precision tolerances are not required.

Ezell Precision Tool Co.
Clearwater, FL 33762 4420
Dec 29, 2004 Custom Ejector Sleeves can be machined from H-13, A10, S-7, and M-2 tool steel, as well as 420 and 440 stainless steels, with 0.0002 in. accuracy on ID and OD and surface finishes to 2 RMS. Sizes range from 0.016 in. ID to 2 in. OD in lengths up to 14 in. long, with or without shoulders. Customized with EDM forms, vent grooves, ribs, and other special requirements, sleeves can be supplied with surface treatments including various nitride processes and plating.

Waytek Inc.
Chanhassen, MN 55317
Sep 28, 2004 Available in ¼â€“1 in. diameter, Flexo F6 is split laterally and can open up to accommodate variety of bundling requirements. Sleeving will bend to tight radius without puckering or splitting open and will not impair or affect flexibility of harnesses or hoses when installed on machinery. Offering UV resistance, Flexo F6 is rated to 257°F and can be cut with hot knife or scissors.

3 Palms Manufacturing Co.
Culver City, CA 90230
Sep 23, 2003 Rail Sleeve System URS (Upper Rail Sleeve) and LRS (Lower Rail Sleeve) models prevent swelling, cracking, and rotting of fence members' exposed ends due to moisture absorption. Made from galvanized steel fashioned into closed-end sleeves, URS models install over sawn ends of horizontal fence rails. Also made from galvanized steel, LRS models are applied to lower horizontal fence member at horizontal plane and over sawn-end that abuts vertical post.

Royal Diversified Products
Warren, RI 02885
Oct 21, 2002 Ejector Sleeves are machined from H-13 hotwork die steel and ion nitrided to Rc 65-75 on inside and outside diameters for wear resistance. Precision ground with +.0005-0000 in. ID tolerance and OD tolerance of -/0003-0008 in., standard sleeves are available from 3 to 12 in. long with 3/32 to 3/4 in. IDs. Special Sleeves can be machined from 420 and 440 stainless, A10, S-7, and M-2 steel as well as H-13 hotwork die steel.

Zippertubing Co.
Los Angeles, CA 90061 0129
May 17, 2002 DVH-20 jacketing is constructed from medium-weight, flame-retardant PVC, laminated to both sides of polyester cloth. Reinforced construction provides resistance to wear, tears, and abrasion. Operating temperature is –40 to +85 deg C. Jacket is available for flat or round cable bundles from 3/8 to 4 in. in variety of colors.