Tubes

Materials & Material Processing, Mechanical Components & Assemblies

Sandvik Presents its Portfolio of High-Performance Products at Rio Oil & Gas

November 14, 2016

HOUSTON, Nov. 10, 2016 - Sandvik, a developer and producer of advanced stainless steels, special alloys, titanium and other high-performance materials, exhibited at the 18th annual Rio Oil & Gas Expo and Conference, the largest oil and gas event in Latin America, which was held from Oct. 24-27, in Rio de Janeiro.

At the show, Sandvik presented its wide range of corrosion-resistant...Read More

Mechanical Components & Assemblies

Tube Closures Secure Tube Packaging. Protect Products

November 13, 2016

A variety of tube closures help transport of a wide range of contents in fiber tubes - from mailings to larger,, linear products.

(Greenville, Wis.) – Manufacturers and shippers can save packaging cost and handling time when using fiber shipping tubes with easy-to-use tube closures from Badger Plug. A variety of tubes are available to suit most shipping applications – from...Read More

Mechanical Components & Assemblies

Nano-C Receives EPA Approvals for Single Walled Carbon Nanotubes

July 24, 2015

WESTWOOD, Mass.,– Nano-C, Inc. received clearance from the U.S. Environmental Protection Agency (EPA) to manufacture and sell Single-Walled Carbon Nanotubes (SWCNT) for a wide range of applications. Nano-C worked extensively with the EPA through the TSCA Premanufacture Notice ("PMN") process to develop effective environmental, health and safety protocols for the production and use of SWCNT....Read More

Mechanical Components & Assemblies, Services

Tesla Nanocoatings Increasing Use of SouthWest NanoTechnologies Carbon Nanotubes (CNTs) for Its Infrastructure Coatings and Paints

November 26, 2014

High Quality SMW™ Specialty Multi-wall Carbon Nanotubes Incorporated into Teslan-brand coatings used by Transportation, Oil and Gas Companies. NORMAN, OK, CANTON, OH– Tesla Nanocoatings is expanding production of its Teslan brand of nanocoatings, a highly effective corrosion-resistant coating for structural steel, produced with SMW™ Specialty Multi-wall Carbon Nanotubes developed by...Read More

Mechanical Components & Assemblies

Squeeze Tube Packaging can be supplied via high-speed operation.

July 23, 2014

Ranging in size from .75–5.5 fl oz, squeeze tube packaging is available to accommodate need for private label packaging for silicones, latex, and an anti-oxidant grease compound that serves electrical industry. Machine fills metal, plastic, and plastic laminate squeeze tubes with precision at speeds up to 45 tubes/min. As packaging alternative to caulk tube cartridges, cups, and bottles, squeeze tubes let user apply caulk or sealant without caulk gun. Read More

Fluid & Gas Flow Equipment, Mechanical Components & Assemblies

Sandvik Sets the Standard with Project Win for Nanjing, China

July 8, 2014

Sandvik Materials Technology has been awarded the contract to supply specialist heat exchanger tubes to a prestigious chemical green field project in Nanjing, China. More than 400 tonnes of duplex tubes, including both straight and U-bend, are to be supplied and installed at a world-scale Propylene Oxide (PO) production plant with the first quantities being delivered in October 2014 and...Read More

Fasteners & Hardware, Mechanical Components & Assemblies, Mechanical Power Transmission

High-Speed Shear Spacer Protects Turbomachinery Drives During Major Torque Overloads

December 9, 2013

FLORENCE, KY — The Kop-Flex high-speed shear spacer coupling uses a patented double-tube design, precision machining and bearings, and special metal treatments to help provide predictable shear during torque overloads on turbo drivetrains, allowing safe coast down of systems turning at up to 20,000 rpm. Developed to protect gas-turbine-powered generator drives during electrical faults, the...Read More

Machinery & Machining Tools, Materials & Material Processing, Mechanical Components & Assemblies, Paints & Coatings

Nantero Announces Qualification of New Brewer Science Cntrene Material

September 30, 2013

Ready for NRAM Manufacturing WOBURN, Mass. – Nantero, Inc., the nanotechnology company pioneering the use of carbon nanotubes (CNTs) in the development of next-generation semiconductor devices, today announced that it has qualified Brewer Science's new CNTRENE 1020 series CNT material for use in NRAM manufacturing. Brewer Science is working with NRAM licensees in production CMOS fabs to...Read More

Material Handling & Storage, Mechanical Components & Assemblies, Packaging Equipment

Recloseable Tube accommodates multi-use products.

May 8, 2012

Designed for liquids, creams, and ointments that require multiple applications, Tear n' Tuck easy-open tear-top tube has fold-and-tuck precision application tip that allows tight resealing after initial product dispensation. Tube is offered in various tip designs, orifice dimensions, package sizes, and fills. Package can be customized to accommodate any need, from measured doses to product flow, and can be hot stamped or produced using pre-printed material. Read More

Fluid & Gas Flow Equipment, Mechanical Components & Assemblies

Ceramic Tubes

February 10, 2012

Ortech Inc. carries a full line of ceramic tubes in the following ceramic material. Mullite: 3Al2O3o2SiO2, Alumina 99.8%: 99.8% Dense Alumina (Al2O3), Alumina 99.5%: 99.5% Dense Alumina (Al2O3), Alumina 96%: 96.0% Dense Alumina (Al2O3), TTZ: Magnesia partially stabilized Zirconia (ZrO2), YTZP:Yttria partially stabilized Zirconia (ZrO2), ZDY: Yttria fully stabilized Zirconia (ZrO2) along with...Read More

Fluid & Gas Flow Equipment, Laboratory and Research Supplies & Equipment, Material Handling & Storage, Materials & Material Processing, Mechanical Components & Assemblies, Services, Test & Measuring Instruments

PrecisionCells.com Offers Custom Manufacturing Services of Quartz Optical Products

November 26, 2010

Farmingdale, New York, US - PrecisionCells.com, a manufacturer and designer of quality cuvettes, offers custom manufacturing services of quartz optical products. PrecisionCells.com, the leading manufacturer and designer of high quality cuvettes, offers custom manufacturing services of quartz optical products. Being one of the few companies that can custom manufacturer quartz optical components,...Read More

Material Handling & Storage, Mechanical Components & Assemblies, Mounting & Attaching Products, Packaging Equipment

Tekni-Plex to Highlight Line of Innovative Packaging Products and Materials at Pack Expo 2010

September 17, 2010

King of Prussia, PA -- Tekni-Plex, a global, diversified manufacturer of packaging products and materials for the healthcare, consumer and food packaging industries, will be exhibiting at this year's Pack Expo at Booth #6156 on October 31st - November 3rd in Chicago, IL. Among the products Tekni-Plex will highlight at the show are blister films, closure liners and aerosol components such as...Read More

Mechanical Components & Assemblies, Services, Thermal & Heating Equipment

Breathing Added Life into Failing Heat Exchangers

April 29, 2010

AEP Tanner's Creek power station found that using the latest technological advancements can add years to heat exchanger units. By more accurately and quickly replacing tubes, costs are slashed and service is life extended. When heat exchanger tubes - sometimes numbering a thousand or more per unit - begin to crack or wear, the effects can lead to a cascade of subsequent failures in adjacent...Read More

Mechanical Components & Assemblies, Sensors, Monitors & Transducers

Patent on Microfluidic Device and Microtube Design Granted to ISSYS

February 15, 2010

YPSILANTI, Michigan - Integrated Sensing Systems, Inc. (ISSYS) announced that the U.S. Patent Office has granted it a utility patent (US 7,628,082) "Microfluidic Device and Microtube Therefor." According to Doug Sparks, Executive VP of ISSYS, this patent describes new designs for resonating micromachined tubes which provide improved sensing performance. These sensor chips are used by ISSYS to...Read More

Machinery & Machining Tools, Mechanical Components & Assemblies, Mechanical Power Transmission

Custom Lightweight Carbon Fiber Core Shafts

August 18, 2008

NimCor's composite core shafts are engineered for exact performance. (Nashua, NH) - NimCor's carbon fiber core shafts are custom engineered for optimum performance within each application. Winding configurations, fiber modulus ratings, composite resins and curing cycles for each shaft are all controlled within NimCor's ISO-certified winding operation. Carbon fiber and fiberglass tubes are...Read More

Machinery & Machining Tools, Mechanical Components & Assemblies

PPCM Introduces New Honeycomb Packaging Machine

July 28, 2008

Premier Paper Converting Machinery (New Berlin, Wis.) has introduced custom machinery that produces honeycomb panels for protecting large products, such as consumer white goods, when shipped in corrugate boxes. The new PPCM converting machinery is fed by four large 98-inch wide rolls of Kraft paper, each one weighing up to 5,300 lb. To hold these huge rolls during unwinding, custom carbon fiber...Read More

Machinery & Machining Tools, Material Handling & Storage, Mechanical Components & Assemblies

University of Tuebingen Ready to Produce Carbon Nanotubes on AIXTRON CVD System

January 29, 2008

Posted: November 28, 2007 AIXTRON AG announced the installation and commissioning of a Nanoinstruments Black Magic 2-inch R&D equipment for carbon nanotube (CNT) growth at the Physics and Chemistry Research Facility, University of Tuebingen, Germany. The new equipment combines both thermal CVD and plasma enhanced CVD in a single platform, and will be used for the development of carbon...Read More

Fluid & Gas Flow Equipment, Mechanical Components & Assemblies

Chemical Dip Tubes control fumes and eliminate spills.

November 21, 2005

Utilizing dip-tube integrated with quick-disconnect coupling system, DrumQuik® Series allows safe removal of aggressive chemical media from IBCs, drums, and other rigid containers. Units ensure reliable connection of liquid lines and spill/fume-free extraction of chemicals. Natural, virgin PTFE, polypropylene, and polyethylene options assure chemical compatibility and purity. Mechanical keying and IdentiQuik(TM) RFID options prevent misconnections and track chemical inventory. Read More

Mechanical Components & Assemblies

Miniature Tubes/Rods target medical applications.

October 19, 2004

Available in stainless steel, titanium, Inconel and other exotic metals, Custom Rod and Tube components are offered in diameters from .032-1.250 in. and lengths from .032 in. to 12 ft. Solid tubular part end features include bending and contouring, threads, forms, grooves, and cross holes. Parts can be laser etched for part traceability. They are suited for minimally invasive surgical devices used in coronary, vascular, and orthopedic surgery. Read More

Mechanical Components & Assemblies

Perforated, Welded Tubes are supplied to ISO standard.

March 27, 2003

Perforated tubes are available in materials such as mild steel, stainless steel, Monel, Hastelloy, Inconel, and titanium. Suited for consumer and industrial products, tubes are available with plated or electropolished finishes. Welded tubes are offered in diameters from ¼-11 5/8 in. with diametric dimensional tolerances to meet user specifications. Read More