SKF Motion Technologies    Lansdale, PA 19446
Feb 09, 2006 With pitches from ½-5/8 in., IWIS Spike Chains feature double strands and curved spikes that precisely puncture plastic along discard side and then pull material smoothly during conveying process. Spikes are engineered in 2 sizes and angled at 17° to enable exacting punctures without distorting material. Design purposely curves inward to prevent packaging materials from lifting or mispositioning. Pre-tensioned steel chains offer wear resistance and run quietly.

GKN Driveline    Auburn Hills, MN 48326-2362
Feb 08, 2006 Flexible sealing and protection boots for constant velocity joints (CVJs) lend to increased component protection and life. Plunge boots, made from thermoplastic elastomers, increase wear resistance for CVJs through features such as 140°C max operating temperature tolerance and resistance to cracks as well as high-velocity impacts. Products exhibit high-speed spin stability as well as resistance to inner pressure changes.

Iomega Corp.    Roy, UT 84067
Feb 06, 2006 Iomega® StorCenter(TM) Pro NAS 400e Expansion Chassis helps SMBs manage growing network storage requirements by allowing addition of up to three 400e Expansion Chassis units per Iomega StorCenter Pro NAS 400r series server. Each chassis adds 1 TB of storage space with 4 hot-swappable SATA HDDs to host NAS device and is managed under 400r Series server's Windows® Storage Server 2003 OS license. Each drive can be configured as RAID 0 (striping), 1 (mirroring), or 5 (parity).

Quicksilver Controls    San Dimas, CA 91773
Feb 03, 2006 Right angle motor cable adapters, QCI-D15HD-R1 and QCI-D15HD-R2, are designed for 15 pin D shell motor connector (D15HD). QCI-D15HD-R1 routes cable toward motor shaft and QCI-D15HD-R2 routes cable away from shaft. Units are 1 in. high and include screws to secure adapter to motor. Adapters are capable of handling full horsepower of SilverNugget N2 and SilverDust D2 servo controller/driver, including motor and encoder feedback signals.

Lincoln Industrial    St. Louis, MO 63120 1578
Feb 02, 2006 Made of heavy-gauge steel, Model 3614 features 18 in. offset bowl that lets technician catch fluid without repositioning tank. Telescopic bowl adjustment range of 44-72 in. meets varying vehicle requirements, and valve setup allows evacuation with bowl set at any height. With 20 gal capacity, unit averages 15-20 vehicles before tank evacuation is required. Fixed air regulator allows use of standard shop air for operation.

ARM, Inc.    Austin, TX 78746
Feb 01, 2006 Provided in 90 nm foundry process, ARM1176JZF-S(TM) processor features ARM® Artisan® Advantage(TM) cell library and memories and occupies 2.4 mm² silicon area. It delivers performance of over 920 Dhrystone MIPS for existing applications and operating systems without software re-design or re-compilation. Product also includes 16 KB instruction cache, 16 KB data cache, 4x high-performance AMBA® 3 AXI(TM) interconnect interfaces, and vectorized floating-point unit.

Lincoln Industrial    St. Louis, MO 63120 1578
Jan 27, 2006 Combining performance of vacuum brake bleeding with automatic master cylinder refill kit, Models MV6835 and MV6838 include Mityvac MV6830 Vacuum Brake Bleeder and MVA6832 Clamp-on Style Auto-refill Kit. Model MV6838 also includes MVA6834 Plate Style Auto-refill Kit, making it compatible with all vehicle makes and models and master cylinders. Using compressed shop air, venturi brake bleeder includes variable thumb throttle, swivel air inlet, and automatic shutoff.

J. W. Winco, Inc.    New Berlin, WI 53151
Jan 27, 2006 Offered in single or double jointed versions, Metric Universal Joints are made of carbon steel, with case hardened bearing surfaces, pins, and bearing sleeves. Units with friction bearings come in bore sizes of 6-32 mm and allow for speeds up to 1,000 rpm, while joints with needle bearings range in size from 10-32 mm and are suited for applications up to 4,000 rpm. Allowable rpm is dependent on load, duration, angular deposition, and lubrication.

Hybricon Corp.    Ayer, MA 01432
Jan 26, 2006 Designed for applications using high-power, conduction-cooled boards, 1-ATR chassis meets ARINC 404A/MIL-STD-91403 requirements and features brazed construction with liquid-cooled card cage sidewalls. Top load 1 ATR short is available in standard and high-power configurations with 9- or 8-slot VITA 41 VXS or VME64x backplane and 1 or 2 power supplies, respectively. High-power configuration is capable of 800 W for 1 ATR short or 1,000+ W for 1 ATR long.

Advantech Automation Corp.    Cincinnati, OH 45240
Jan 24, 2006 Combining LCD display, keyboard, touchpad, OSD control, function and cursor keys in single chassis, ATM-4233 is suitable for environment/facility monitoring and test and measurement applications. Computing platform with expansion capacity offers compatibility with Pentium 4, Pentium M, and Celeron CPU cards. Fourteen expansion slots enable use of any combination of ISA/PCI/CPU cards. Powered by ATX Standard supply, it features 2 USB ports on chassis front.

Dataprobe, Inc.    Paramus, NJ 07652 3618
Jan 18, 2006 In case of line or equipment failure, T-APS-R-15 chassis and T-APS-R card system provides automatic failover switching protection for sites with up to 15 complete, independent primary, and redundant T-1 or E-1 circuits. System, also manageable via SNMP, Telnet, or serial interface, enables switches can be used in several configurations. Each card operates independently, monitoring T-1 or E-1 circuits and determining best path as based on user-supplied parameters.

J. W. Winco, Inc.    New Berlin, WI 53151
Jan 05, 2006 Used in controlling and linking mechanisms in all types of machines, Angled Ball Joints consist of ball socket and ball shank. Housing and shank are zinc-plated steel with blue passivated finish, with hardened ball and lubricated ball sockets. Angle of rotation is 15° for safety catch version and 18° for non-safety catch version. Ball joints are available with right-hand or left-hand thread, in thread sizes M5 x .8 through M14 x 1.5.

Xilinx, Inc.    San Jose, CA 95124 3400
Dec 30, 2005 CAN LogiCORE(TM) provides features and capabilities to implement Controller Area Network (CAN) protocol with Xilinx Spartan(TM) and Virtex(TM) Platform FPGAs, delivering complete, flexible hardware/software solution that addresses automotive market requirements. Fully verified intellectual property (IP) core conforms to ISO 11898-1 CAN 2.0A/B standards and lets designers program as many CAN channels as needed. FIFO depth may be configured from 2-64 messages.

Cambridge Consultants Ltd    Cambridge CB4 0DW  United Kingdom
Dec 20, 2005 Featuring RISC architecture, Model XAP4 has both 16-bit data and address buses and is capable of running programs up to 64 kbytes. On 0.18 micron CMOS fabrication process, unit can deliver up to 63 Dhrystone MIPS at clock frequency of 117 MHz. SIF debug logic provides full control over processor and access to debug registers, together with non-invasive access to any part of processor's memory map for data acquisition while system is running.

Lexair, Inc.    Lexington, KY 40511 1018
Dec 12, 2005 Offered with threaded nose, 5C pull-back style collet closer accepts standard 5C collets up to 11/16 in. diameter, 5C step chucks for parts up to 6 in. diameter, and expanding nose 5C collets for ID holding. Operating at max of 150 psi air or 750 psi hydraulic, drawtube force is 7.5 x line pressure, yielding theoretical clamping force of 1,688 lb on air and 8,438 lb on hydraulic at max drawtube force.

SDP/SI (Stock Drive Products/Sterling Inst)    New Hyde Park, NY 11042 5416
Dec 07, 2005 Split square hole sleeve Series A 7C19 is suited for producing tooling such as milling cutters or boring bars without broaching equipment, while split square hole bushing Series A 7C18 fits any mating size collet or 3-jawed chuck. Sleeves are cold-rolled steel C1117 and range in length from ¾-5 in. Bushings are 4140 steel and hardened to Re 40-45. Broached square holes, which range from .128-1.260 in., accommodate 12 tool bit sizes from 1/8-1¼ in.

SDP/SI (Stock Drive Products/Sterling Inst)    New Hyde Park, NY 11042 5416
Dec 06, 2005 Available in 8 different lengths from ¾-3¼ in., carbon steel Series A 7C20 can be used as sliding couplings, extensions for socket drives, bearing carriers, and as sliding bearings. Broached hex holes maintain tolerance of ±.001 in. and range in width across flats from .128-.628 in. Sleeves can serve as replacement in applications requiring spliced shafts and bushings, where precision tolerances are not required.

Stafford Manufacturing Corporation    North Reading, MA 01864-0277
Dec 05, 2005 Machined from stainless steel, Universal Mounting Collar is designed with smooth bore and countersunk tapped hole that accepts screw for attaching virtually any item to tube or pipe. Featuring flat surface for mounting, 2-piece design, and hex-type clamp screws, collar is fully adjustable and eliminates need for drilling holes or welding. Collar is available in 6 sizes for ¼-1¼ in. tube and pipe and is suited for industrial and laboratory racks and equipment.

SMC Corporation of America    Tustin, CA 92780
Dec 05, 2005 Supplied with air cushions and centralized piping, double acting MY2 Cylinders have stroke adjusting unit and do not require lubrication. Thrust forces range from 40-1,005 N, cylinder strokes extend from 100-5,000 mm, and max operation speed is 1,500 mm/sec. Offered in bore sizes of 16, 25, 40, and 63 mm, low-profile MY3 Cylinders provide strokes up to 3,000 mm and are available with floating joints, stroke adjusters, side supports, and auto switches.

Belden, Inc.    Broadview, IL 60155
Dec 01, 2005 With outer diameter as small as 8 mm, Miniature Universal Joints are suited for miniature machinery, medical equipment, and model making. They are available in various grades of stainless steel as well as alloy heat-treated steel. Standard version has operational angle of deflection up to 35°.