Zip-Pak    Manteno, IL 60950
Sep 27, 2012 Allowing contents of packaging to be poured from side gusset, Vector™ self-sealing resealable matrix allows consumers to reseal packaging without exact alignment of opposing segments. Design allows closure to be used as mated fastener for conventional applications. Able to mate to itself, product can be pre-applied using Inno-Lok™ equipment and run on standard vertical form fill seal (VFFS) machines with side gusset modification.

SKF USA, Inc.    Lansdale, PA 19446
Sep 26, 2012 Intended for power transmission and conveyor applications, Roller and Engineered Chains feature through-hardened, shot-peened, and ball-burnished inner and outer link plates with case-hardened, precision-ground pins; precision cold-rolled bushings; and through-hardened, shot peened solid rollers. Chains perform in temperatures from -4 to 300°F (-4 to 750°F for stainless steel) and can be supplied with rivet or cottered design. All comply with appropriate ANSI, ISO, or DIN standards.

Continental Fan Mfg. Inc.    Buffalo, NY 14215
Sep 25, 2012 Available in 9 sizes ranging from 7–18 in. in diameter, TEK Impellers are injection molded from high strength GRP polyamide. Backward curved airfoil impellers are stronger than steel with half the weight, and include non-overloading power characteristics. CW, CCW, and DWDI matching inlet cones are available.

Haydon Kerk Motion Solutions    Waterbury, CT 06705
Sep 21, 2012 Offering stroke lengths of 1–18 in., Model BGS04 is based on linear actuator driving 303 SS precision lead screw. System is available with size 11 double stack or size 17 single stack hybrid linear actuator, depending on load requirements. Lead screw drives anti-backlash nut embedded in machined aluminum carriage mounted to stainless steel ball rail. Maximum horizontal load is 22 lb, and maximum roll, pitch, and yaw moments are 5.72, 4.88, and 5.68 lb-ft, respectively.

National Instruments Corp.    Austin, TX 78759-3504
Sep 20, 2012 Featuring PCI Express 2.0 x 8 links to every slot, 18-slot 3U Model NI PXIe-1085 offers bandwidth of 4 GBps/slot and 12 GBps total system bandwidth. All-hybrid-slot backplane accommodates both PXI and PXI Express modules. Remote system health monitoring optimizes system manageability, while hot-swappable fans and tool-less, replaceable power supply optimize system availability in high-performance applications.

SRI International    Menlo Park, CA 94025
Sep 20, 2012 Combing real-time electronic image stabilization with H.264 encoding, Acadia® ILS-6500™ optimizes distribution of quality video. System enables accurate decision-making, helping users interpret threats and read important identifiers such as license plates. Weighing 38 g, module is suitable for OEM camera integration, border and perimeter security, remote surveillance, video monitoring and storage, and airborne/mobile ISR.

THK America, Inc.    Schaumburg, IL 60173 5340
Sep 17, 2012 Available in 5 models with LM rail widths from 30–60 mm, Type SPR and Type SPS LM Guides feature 8 rows of raceways, small diameter balls, and extended length blocks. Ball deformation is minimized, which promotes rigidity, while number of balls reduces amplitude of rolling element. Also included, THK Caged Technology eliminates need for frequent lubrication and fosters long-term, maintenance-free performance. Resulting rigidity and low-waving performance promote equipment accuracy.

Schunk    Morrisville, NC 27560
Sep 17, 2012 Featuring rigid design and hydraulic dampening of end positions, Model HLM is suited for automated assembly. Pre-clamped, scope-free cross roller guidances assure high guiding accuracy and precision. Available in 4 sizes with strokes from 0–150 mm, module provides feed rates to 482 N and torsional moment to 81.7 Nm. Stroke can be continuously fine-adjusted per side by up to 25 mm. In case of power outage, clamping cartridge prevents lowering of slide.

L & J Technologies, Inc.    Hillside, IL 60162
Aug 21, 2012 While maintaining gas-tight integrity, 97187 View Port Inspection Cover provides unhindered visual inspection of digester's interior and contents. Glass window is mounted between flanges with quick release hood, and hinged cover protects glass. With neoprene blades, stainless steel wiper assembly facilitates interior and exterior cleaning of observation window from condensation or debris. There are 6 sizes available from 8-24 in., and max working pressure is 1 psig.

Neosho Trompler, Inc. (NTI)    Hartland, WI 53029
Aug 20, 2012 Suited for jobs such as crane assembly, rigging, and heavy construction, Trompler 1,000 ton capacity, double acting hollow hole hydraulic cylinder has max pressure rating of 10,000 psi and piston design that enables powered push/pull forces. U.S. manufactured, portable solution features industrial hard chrome pistons, heat-treated steel, and heavy-duty bearings. All components meet or exceed ANSI/ASME B30.1 safety standards.

Harting KGaA      Germany
Aug 15, 2012 Made of glass fiber reinforced plastic with flange gaskets in fluorine rubber, Han-Eco® Series offers weight advantages for outdoor applications. FPM sealing material provides resistance to effects of weather, especially UV radiation, ozone pollution, and high temperatures. It also resists chemicals, such as mineral oils, synthetic hydraulic fluids, fuels, aromatic compounds, and many organic solvents.

Extreme Engineering Solutions (X-ES)    Middleton, WI 53562
Aug 13, 2012 Measuring 16.5 x 5.5 x 11.5 in., XPand1201 supports up to eight 3U conduction-cooled CompactPCI modules and 2 optional power supply modules. System also supports up to 482 W of total simultaneous power delivery and thermal dissipation of up to 60 W per slot. Accommodating Rear Transition Modules, platform provides I/O flexibility and ability to rapidly prototype deployable systems.

Eriez Magnetics    Erie, PA 16506
Aug 10, 2012 Model GH-12 Drawer Grate In Housing integrates Rare Earth magnets that automatically remove fine tramp iron contamination. Suited for applications where process is continuous and cleaning occurs during operation, product cycles each grate row independently to ensure at least one row always remains in product flow. Unit uses single skin tubes housed in dust-tight, stainless steel housing that can be installed in square, rectangular, or round piping.

Extreme Engineering Solutions (X-ES)    Middleton, WI 53562
Aug 08, 2012 Offering support for COM Express module, PMC/XMC, and SSD, CX-DP COM Express® Development Platform enables early development and rapid prototyping for COM Express and XPand6000 Series-based systems. System provides single COM Express site with AB and CD connectors. For Freescale QorIQ(TM)-based development, CX-DP supports Type 5FS and Type 10 COM Express modules; and for Intel® Core(TM) i7 processor-based development, it supports Type 6 and Type 10 COM Express modules.

Reed Manufacturing Co.    Erie, PA 16512
Aug 01, 2012 Available for Saw It® Pneumatic Saw, Blade Guides are available in 21 and 30 in. lengths. Units reach across pipe section being cut and stabilize blade so that it does not whip and vibrate, extending blade life, squaring cut, and helping to eliminate accidental blade breakage. Providing power and reciprocating motion to blades, Saw It(TM) is suitable for cutting plastic, steel, and stainless steel pipe.

Robbins & Myers Energy Services Group    Willis, TX 77378
Jul 27, 2012 Intended for progressing cavity downhole pumping applications, Era® CrossOver(TM) High Performance Rod Guides are manufactured from engineered plastics, enhanced with performance additives to withstand well conditions up to 500°F. Hydrodynamic design helps keep fluid closer to laminar flow around guide and minimizes chance of gas breakout, while concave body channel allows wider vanes and low fluid drag. DuraGuide(TM) wear indicators provide visual confirmation of remaining erodible material.

Advanced Arch Grilles    New Hyde Park, NY 11040
Jul 27, 2012 Suited for plaster or drywall applications, Plaster Frame Linear Bar Grille features J Bead design that is fastened to wall or ceiling via outer flange by either screwing or nailing through pre-drilled holes. After fastening, flange is covered with skim coat of plaster, providing clean, flush appearance. Custom fabricated grille is available in both aluminum and stainless steel with range of finishes. Core can be welded to frame, or removable for access to damper controls.

Belimo Americas (USA)    Danbury, CT 06810
Jul 25, 2012 Facilitating attachment of Belimo EF spring return actuators to damper jackshaft, ZG-JSL simplifies typical installations and eliminates difficulties where bearings are hard to access. Built-in shaft allows direct coupling of Belimo actuators, while anti-rotation plate enables installed actuator to be rotated 90° for space conservation. Using ZG-JSL linkage, jackshaft installations take minutes.

Metallized Carbon Corp.    Ossining, NY 10562
Jul 24, 2012 Metcar® Grade M-400 is non-porous, heat resistant to 500°F, and suited for machine parts that must run submerged in water, water-based chemicals, or organic chemicals with low friction and extended wear life. Available in parts machined to meet size specifications or in 56 standard blank sizes, material is approved for use in potable water and food contact applications. Applications include mechanical seal faces, bearings, pump vanes/end plates, and packing/rotary joint rings.

iwis drive systems, LLC    Indianapolis, IN 46268
Jul 23, 2012 Flexon magnetic curves are plastic single- or multi-track guides that hold flat top chains while flexing around radius by acting upon chain pins with magnets placed around bend. Alignment of magnetic fluxes throughout tracks results in near pulsation-free running, reducing tension and noise in conveying products for beverage, food, and packaging industries. Offered in all standard sizes and for all usual flat top chains, radii, and angles, curves can also be manufactured to specification.