Duff-Norton    Charlotte, NC 28241 7010
Aug 25, 2008 Designed for commercial and industrial applications requiring opening and closing, tilting and pivoting, lifting and lowering, and positioning, SCD Direct Drive SuperCylinder(TM) Electric Cylinders have maximum capacity of 3,780 lb. Applications include gates, dampers, oven doors, processing tank doors, antennas, orthopedic tables and other medical equipment, ergonomic furniture, and agricultural equipment. Custom designs are also available for special applications.

Xilinx, Inc.    San Jose, CA 95124 3400
Aug 22, 2008 With Embedded Development HW/SW Kit, hardware and software designers can architect, develop, and debug embedded processing systems based on PowerPC® 440 and MicroBlaze(TM) Processors. In addition to Xilinx Platform Studio and ISE® Design Suite design environments, kit includes Virtex-5 FX70T FPGA development board, Model ML507, to accelerate system design; Linux reference designs; library of processing IP cores; and USB JTAG download/debug cable.

MIPS Technologies, Inc.    Mountain View, CA 94043-1353
Aug 20, 2008 Featuring low-power, compact, and silicon-saving design, 40 nm USB PHY IP core and USB-certified 1.8 V, 45 nm USB PHY IP core enable developers to integrate USB functionality into SoCs for mobile applications. Programmability allows developers to fine-tune analog parameters of their system for optimal performance results in silicon.

Advantapure, Div. Of NewAge Industries    Southampton, PA 18966
Aug 20, 2008 Manufactured from platinum-cured, injection-molded silicone, which is free of animal-derived ingredients and meets USP Class VI and FDA standards, Container Closures and Stoppers provide smooth finish with gap-free surfaces for true seal. Sterilizable by autoclave or gamma radiation, they resist temperatures from -100 to 400°F, as well as cracking, particle migration, and attack from variety of chemicals, and assure aseptic fluid transfer, sealing, filling, and sampling.

Knaack Manufacturing Company    Crystal Lake, IL 60014
Aug 19, 2008 WEATHER GUARD® transfer tank covers are available in model numbers 351, 353, 359, 361, and 362, corresponding to 1 of 5 available WEATHER GUARD transfer tank models. They are installed by slipping cover onto 50, 75, 90, 100, and 110 gal capacity diesel fuel tanks that include powder coat finish and threaded 2 in. ID filler neck.

National Instruments Corp.    Austin, TX 78759-3504
Aug 14, 2008 Complemented by NI PXIe-1075 18-slot high-bandwidth chassis, NI PXIe-5663 can perform signal analysis from 10 MHz to 6.6 GHz with up to 50 MHz of instantaneous bandwidth, while NI PXIe-5673 delivers signal generation from 85 MHz to 6.6 GHz and up to 100 MHz of instantaneous bandwidth. Offering operating range of 0-50°C, PXI Express chassis has PCI Express lanes routed to every slot providing up to 1 Gb/s per-slot bandwidth and up to 4 Gb/s total system bandwidth.

THK America, Inc.    Schaumburg, IL 60173 5340
Aug 13, 2008 Designed with cold drawn hollow rail and aluminum block, Light LM Guide enables high-speed operation. Unit includes hardened steel raceways and THK Caged Technology, which employs synthetic resin cage with patented curvature that cradles each ball and separates it from next one. Spaces between rolling elements retain grease and act as lubrication system for long-term, maintenance-free operation.

Hennig, Inc.    Machesney Park, IL 61115
Aug 12, 2008 Designed for use of aluminum aprons, non-motorized guide system works in purely mechanical manner. Reversing or winding system allows guiding in 1 or 2 directions, depending on type of apron (Aluflex or GS20). Available space next to or inside machine determines type of apron guide: whether to roll up or reverse, in elliptical or spiral movement, in every orientation. Design accommodates speeds exceeding 328 fpm and acceleration exceeding 1 g while exhibiting minimal wear and tear.

MIPS Technologies, Inc.    Mountain View, CA 94043-1353
Aug 08, 2008 With standard digital output and die area of 4 mm², CI10084tg supports GNSS systems in L1 band and is also compatible with Galileo. It uses fractional PLL, letting designers leverage crystal frequencies available in host application, while options allow for parameter optimization. This integrated low-noise RF front-end for GPS receivers suits companies developing new GPS devices, adding GPS functionality to other devices, or reducing form factor of next-generation devices.

CyberResearch, Inc.    Branford, CT 06405 2932
Aug 06, 2008 With up to 2 GHz Pentium® M CPUs, 4 USB ports, and 2 COM ports, PXI CXDC Controller Boards offer vibration resistance, withstand shocks up to 30 g, and operate at temperatures up to 131°F. PXIC Series Chassis includes two 3U 8-slot benchtop chassis and portable 3U 14-slot chassis with 15 in. touchscreen LCD. PXI Expansion Boards include 7 multifunction A/D boards with 2-64 channels, 2 multifunction D/A boards with 4 or 8 channels, and 4 DIO boards with 32 or 48 channels.

Eximo    Smithfield   Australia
Aug 06, 2008 Comprising of standard Speedlock components to facilitate quick replacement or addition of parts and assembly, industrial fume arms include built-in valve to allow users to adjust airflow for any application. It also features duct throttle valve, reducing cone, standard and modular ducting Lock Rings, and some Flex ducting. All brackets are external for unimpeded airflow through fume arm. Suited for vapor and fine powders, arms click into normal Eximo ducting ranging from 80-250 mm.

Synopsys, Inc.    Mountain View, CA 94043 4033
Aug 04, 2008 As synthesizable version of IBM PowerPC 464 hard core, PowerPC 460S allows SoC designers to select L2 cache size, L1 cache size, and multi-core processor local bus necessary to optimize their design. This 32-bit embedded processor core also supports an optional floating point unit. As synthesizable version of 32-bit embedded IBM PowerPC 405 hard core, PowerPC 405S supports user-definable L1 cache that helps SoC designers optimize performance and area to match application requirements.

NSK    Ann Arbor, MI 48105
Aug 04, 2008 Offered in custom sizes ranging from RA15 to RA65 and equipped with retaining piece, RA Series Roller Guides support factory automation applications, and offer substantial reduction in roller passage vibration to ensure motion accuracy. High performance seals block entry of foreign matter such as wood chips, metal chips, and dust into rolling surface, preventing performance loss. For severe operating environments, rail covers are available that reduce amount of foreign matter.

Bosch Rexroth Corp., Pneumatics Div.    Lexington, KY 40511
Aug 01, 2008 Suited for applications in tight installation conditions, RTC series compact rodless cylinders are available in 4 versions with 5/8-3 in. dia and maximum stroke length of 32.5 ft. RTC-BV (Basic Version) is suitable for universal use, while RTC-CG (Compact Guide) version offers high precision packed into compact dimensions. RTC-EG (E-line Guide) is guided version of rodless cylinders and RTC-HD (Heavy Duty) version is designed for handling heavy loads.

Igus, Inc.    East Providence, RI 02914 0349
Aug 01, 2008 With installation height of 1.22 in., DryLin® ZLW-0630 self-lubricating actuator features toothed-belt linear drive equipped with hard-anodized aluminum profile, DryLin W compact linear guide, iglide® J plastic sliding elements, and plastic end blocks. Weighing 1.76 lb, maintenance-free unit has 2 ft stroke and operates at speeds up to 6.5 fps. DryLin ZLW is suited for quickly positioning small loads.

Elma Electronic Inc.    Fremont, CA 94538
Aug 01, 2008 Meeting MicroTCA.0 core specification, Blu!Box is 19 in. rackmount system in 5U height. With redundancy throughout, chassis features 2 MCH, 2 power modules, and 2 high performance EMMC cooling units with 5 fan and PWM control, and all modules/components are hot swappable and controlled via Intelligent Platform Management Interface. Unit has backplane with Dual Star topology in 22 layers, redundant field replaceable unit information devices, and carrier locaters.

Smith Flow Control    Erlanger, KY 41018
Jul 31, 2008 Comprising drive gun, valve coupler, and power pack, Easi-Drive is designed for manual valves in situations where valve size, pressure rating, or work environment would otherwise demand dedicated actuator. Fully portable, it can manage bank of valves with single drive tool, and is useful for moving tight or partially-seized valves. System is suitable for all climatic conditions, and is available with pneumatic, hydraulic, and electric alternative power sources.

Columbia Steel Casting Co.    Portland, OR 97283
Jul 31, 2008 Designed to reduce rigging weight while maintaining flexibility and strength, TwistLink chain is suited for use in hoist and drag applications. Double-pitch design can reduce chain weight up to 18%, while surface area in bite region of each link and cross-sectional strength optimizes wearability. Due to use of H-series alloy, product is resistant to abrasion and impact.

Slideways, Inc.    Worcester, MA 01605
Jul 30, 2008 Manufactured to specification from specialty plastics for use in hostile environments, Slideways Custom Profiles include chain and belt guides as well as related components. Typical wear-resistant materials include oil-filled UHMW, UHMW-HT for 275°F service, glass-filled PTFE for -350 to +500°F applications, oil-filled or MD-Nylon, and Eratalyte® TX for resistance to bleach and other harsh chemicals. Sizes range from 1.25-12 in. wide and up to 20 ft long, with tolerances to ±0.005 in.

Ruland Mfg. Co., Inc.    Marlborough, MA 01752
Jul 29, 2008 Available in 316 SS, yellow zinc plated, and high-strength grade aluminum with anodized finish, corrosion-resistant Shaft Collars are single point faced to ensure perpendicularity and proper alignment. Stainless steel models are suited for food processing, medical, and pharmaceutical applications where washdown is required and contamination from corrosion must be avoided. Yellow zinc plated units use RoHS-compliant process, while aluminum models are lightweight with low inertia.