Bunting Magnetics Company    Newton, KS 67114 0468
Jun 24, 2010 Featuring curved magnetic rows, Bunting® Spiral Cylinder optimizes holding power and facilitates installation and removal of dies. Spiral design ensures that plate will always fall on magnetic field and allows cylinder to be used on both die cutting and printing applications. Built with Total Indicator Reading of ±1 micron, cylinder provides total run out accuracy below 1 micron.

EBM - Papst, Inc.    Farmington, CT 06034
Jun 15, 2010 Available in 6 series with sizes ranging from 120-225 mm, S-Force Radial Blowers have nominal speeds of up to 4,600 rpm and provide airflow of up to 988 cfm. Including PWM control input and speed signal, blowers are suited for applications such as heat exchangers, telecommunications cabinet air filters, and wireless electronic cabinets. Options include speed monitoring, closed loop speed control, temperature sensor, or microprocessor controlled motor management.

Tensilica, Inc.    Santa Clara, CA 95054
Jun 11, 2010 Intended for SoC designs, ConnX 545CK dataplane processor core combines base CPU controller with DSP that can sustain 8 simultaneous MAC (multiply-accumulate) operations on independent data pairs per cycle utilizing 160-bit vector registers. It features 3-issue VLIW (very long instruction word) architecture with eight 16-bit multipliers that operate in SIMD mode. Capable of 600+ MHz operation, core also has two 128-bit load/store units and Viterbi convolutional coder accelerator.

Tensilica, Inc.    Santa Clara, CA 95054
Jun 11, 2010 Designed to facilitate SoC integration, Diamond Standard controllers include 5 upward-compatible processor cores based on common Xtensa architecture. These 32-bit embedded control cores, suited for embedded control functions in compute-intensive dataplane functions, are available as cache-enabled and cache-less controllers with on-chip debug hardware that achieves Dhrystone 2.1 results of 1.22-1.59 DMIPS/MHz, depending on model. Specific features vary by model.

Ohio Gratings, Inc.    Canton, OH 44706 1943
Jun 11, 2010 Specifically designed to accommodate wheelchair and high heel traffic, Wheels n' Heels® grating is available in stainless or carbon steel and combine AASHTO H-20 wheel load ratings with ADA pedestrian comfort requirements. Metro style, available with ¼ or ½ in. spacing between bars for optimal ventilation, has no top welds for enhanced aesthetic appeal. InVent style features main support bearing bars running perpendicularly but under top surface bars.

Cooper Hand Tools    Raleigh, NC 27612
May 24, 2010 Weighing just over 1.5 lb each, Campbell® hand line blocks afford utility personnel accelerated means of getting down from working heights. Fiberglass construction gives products working load limit of half ton with 3:1 design factor. To further accelerate process of getting lines up and workers down, product features smooth rolling, permanently lubricated, 3 in. sheave that can run up to 5/8 in. rope.

Graphite Metallizing Corporation    Yonkers, NY 10703
May 20, 2010 Made of graphite/metal alloy formed from molten metal, graphite, and carbon, GRAPHALLOY® Type 1017 Self-Lubricating Bushings contain no oil to contaminate conveyed materials and can withstand dust, chemical attack, caustic liquids, and high temperature environments. GRAPHALLOY does not deform under load and maintains dimensional stability. Offering continuous-duty operation, bushings are suitable for applications where maintenance intervals are infrequent.

Clark-Reliance Corp., The    Strongsville, OH 44136
May 17, 2010 Consuming less than 1 A, Jacoby-Tarbox® Phaeton XTL lights provide bright, clean light for viewing into any vessel with 4 in. or larger window, including large silos. View through feature allows same window viewing, eliminating need for second window by combining illumination and viewing in one. Lights stay cool to touch, eliminating potential burning hazard. FM approved for hazardous areas, models are available with 6 or 4 in. dia, which can be nested on same window for increased brightness.

Advanced Machine & Engineering Co.    Rockford, IL 61103
May 13, 2010 Suited for where heavy loads must be moved in confined spaces without loss of precision or rigidity, Tschudin and Heid linear roller cages and guides allows displacement of moving parts in axial direction via use of parallel shafts and sleeves; no radial movement is possible. Rollers offer line contact with guide, enabling low pre-load at assembly to be maintained. Rollers are arranged within plastic or metallic cage in spiral fashion, spread over entire surface area of shaft and sleeve.

Kontron    Poway, CA 92064
May 13, 2010 Featuring AC power supply and fans with airflow from below AdvancedMC(TM) slots, OM6060 helps in designing, evaluating, and testing compact, and highly integrated multiprocessor systems. Product can accommodate up to 6 mid-size AMCs, one full-size MicroTCA(TM) Carrier Hub, and supports multiple PCIe, GbE, and SRIO configurations. Platform supports multiple CPUs and I/O-boards over PCIe without need of extra PCIe fabric switch.

Synopsys, Inc.    Mountain View, CA 94043 4033
May 13, 2010 DesignWare® MIPI® 4G DigRF(SM) Master Controller IP enables designers to lower risk of integrating DigRF interfaces into baseband ICs and application processors accelerating time-to-market of LTE and Mobile WiMAX SoCs. Compliant to MIPI DigRF v4 1.00 specification, controller implements features defined for protocol and PHY adaptation layers. Configurability of IP RTL provides flexibility for system-specific implementations, while protocol-specific attributes are software programmable.

Continental Fan Mfg. Inc.    Buffalo, NY 14215
May 12, 2010 Featuring electronically commutated external rotor motor, CEC Backward Curved EC Motorized Impeller is suited for many air-moving applications including cooling of motor controls, electronics, power converter cabinets, and modular air conditioners. Speed controllable unit comes in housed or non-housed models with input voltage of 380-480 V, 50/60 Hz 3-phase.

Hexagon Metrology Inc.    North Kingstown, RI 02852
May 03, 2010 Performing 3D inspections of countless industrial parts particularly in metal and plastic machining industries, ROMER Absolute Arm features absolute encoders which simplify inspection process. Lightweight, ergonomic unit offers various grip positions and balanced main tube, ensuring fatigue-free, productive inspection. Available in 7 arm-lengths from 1.5-4.5 m, portable CMM is WiFi-capable and features high-capacity rechargeable batteries.

Misumi USA    Schaumburg, IL 60173
Apr 26, 2010 Cut to lengths specifiable in 0.5 mm increments, aluminum Extrusions HFSB8-8080, HFSB8-4545, HFSB6-6060, and HFSB5-2040 are available with localized machining alterations, holes in specified positions, as well as brackets, joints, nuts, and other hardware. Selection depends on application requirements such as load-bearing strength, hardness, rigidity, tensile strength, finished product dimensions, and desired finish.

TE Connectivity Ltd.    Berwyn, PA 19312
Apr 21, 2010 Intended for mechanical protection of wire and cables, Versaflex polyester sleeves offer flexibility and strength via braided design that allows for expansion and contraction while retaining tension. Cold-applied, RoHS-compliant products conform to irregularly shaped products or substrates without need to heat shrink, do not retain heat or moisture, and are resistant to abrasion. Offering includes flame-retardant and non flame-retardant versions, both available in multiple sizes.

CAST, Inc.    Woodcliff Lake, NJ 07677
Apr 21, 2010 Compact JPEG-E-X IP core supports both 8-bit Baseline and 12-bit Extended Sequential modes of JPEG image compression standard. Conformant to DICOM medical standard, unit compresses images from 8-12 bits per color sample, and also compresses non-standard motion JPEG streams. It can process 450 MS/sec with 69K gates in typical ASIC 0.09 micron process, 280 MS/sec in high-end FPGA devices, or 30 fps of 16:9 HDTV 1080p video in low-end FPGAs.

Kinetic Technologies, Inc.    Wickliffe, OH 44092
Apr 20, 2010 Available in 19 or 26 in. versions, Industrial-Duty Towbar features welded steel trapezoidal shape with full length back plate, and 2¼ in. high jaw hitch fits under carts and in tight clearance areas. Chamfered alloy towbar eyelet and matched alloy hitch tongue offer strength and durability. Units are rated at 10,000 lb gross vehicle weight (weight of cart plus load).

Synopsys, Inc.    Mountain View, CA 94043 4033
Apr 14, 2010 DesignWare(TM) DDR multiPHY supports range of DDR SDRAM standards - LPDDR2, LPDDR/Mobile DDR, DDR3, DDR3L (1.35 V), DDR3U (1.2x V), DDR2 - in single PHY. This lets designers target different DDR types for single chip through software control, promoting flexible integration into various applications. Supporting data rates from 0-1,066 Mbps, product offers DFI 2.1-compliant interface to memory controller and features Delay Lock Loop (DLL) bypass modes for operation below 200 MHz.

TE Connectivity Ltd.    Berwyn, PA 19312
Apr 14, 2010 Offered in flame-retardant and non-flame retardant versions in multiple sizes, RoHS-compliant Raychem Versaflex polyester sleeves are suited for cable bundling and protection of wire harnesses and hoses in industrial, commercial, and rail industries. Sleeves conform to irregularly shaped products or substrates without need to heat-shrink, and braided design allows for expansion and contraction of sleeves while retaining tension. Flame-retardant version meets UL VW-1 requirements.

CEVA, Inc.    San Jose, CA 95110-3710
Apr 14, 2010 Targeting 6 Gbps SSD applications, CEVA-SATA3.0 incorporates Native Command Queuing specifications for Isochronous data transfers and queue management, which in turn enables prioritized transfers of streaming audio and video data. Licensable RTP IP package is accompanied by complete set of deliverables, including comprehensive simulation environment, example C source code, and FPGA-based demonstration platform.