Mechanical Components and Assemblies

Mechanical Components and Assemblies

Protective Sleeves save labor.

Jan 23, 2002

Coated, ballistic Cordura(R) Sidewinder sleeves, with industrial hook and loop closure, allow easy assembly and removal. Sleeves install without disconnecting hydraulic, electrical, and pneumatic hose and cable bundling and can be removed easily for hose maintenance. Material is available in variety of circumferences and bulk lengths to 150 ft for OEM and maintenance operations. Read More

Material Handling & Storage, Mechanical Components and Assemblies

Slide incorporates ball-bearing system.

Jan 17, 2002

Magnetically-coupled High Load Ultran Slide provides high-load carrying capability within Ultran Slide rodless cylinder. Bore sizes are 1 1/16, 1 1/4 and 1 1/2 in. Prelubricated unit provides maintenance-free, leak-free travel. Transition Plates couple rodless cylinders to Linear Thrusters to create multi-axis configurations. Options include stroke adjustment, bumpers, seals for low-pressure... Read More

Machinery & Machining Tools, Mechanical Components and Assemblies

Core Straightener restores roundness of damaged units.

Jan 17, 2002

Portable pneumatic Double E restores damaged fiber or metal-capped cores to original roundness. It has all-steel frame, hermetically sealed nylon-reinforced elastomer bellows impervious to most contaminants, pressure relief valve, and 3-way, 2-position actuating slide valve. Available for 3 and 6 in. cores, it is easy to use and only 1 operator is necessary. Unit is air operated, eliminating... Read More

Mechanical Components and Assemblies

Telescopic Cylinders are available in up to 4 stages.

Jan 17, 2002

Mini-Space® telescopic cylinders use less space than conventional, rodless or cable cylinders. Retracted length is fraction of extended length, and both ports are on rod end allowing use where other cylinders do not fit. Two stage unit extends to 59 in. and when closed occupies 23 in. It has 36 in. of stroke and is made to operate on air or hydraulic fluid. Different mounting styles are... Read More

Mechanical Components and Assemblies

Hydraulic Cylinders have large hollow hubs.

Jan 17, 2002

Short stroke, hydraulic cylinders are designed for installation where independent linear or rotating motion is required through hollow piston. Four standard sizes are available for operating at 3,000 psi with choice of strokes to 4 in. in increments of 1/10 in. Applications include tool and fixture designs, test equipment and structural projects, as well as tooling aids for use in large machine... Read More

Mechanical Components and Assemblies

Handwheels are resistant to solvents, oils, and grease.

Jan 11, 2002

Two-Spoked Handwheels are available in 2 versions: either with or without revolving handle, or with locking retractable handle. Locking retractable handle is designed to pivot freely. Elesa® original designed handwheels are made from high-impact strength technopolymer plastic with black matte finish; hubs are molded in, and made of steel with black oxide finish; and cover disk is matte,... Read More

Mechanical Components and Assemblies

Swivel Fittings spin 360 degrees.

Jan 11, 2002

Metal Swivel Fittings are available in brass, nickel-plated brass or stainless steel, providing easy access in tight spots. They come in straight connectors, elbows and tees. Fittings can be provided in 10-32 through 1/2 NPT male or female threads and in 1/16 through 1/2 ID barb. Read More

Mechanical Components and Assemblies

Metric Chain fits conveyor lines globally.

Jan 11, 2002

Metric 7705 MatTop metric chain is available in both molded-to-width (84.0 mm) and assembled-to-width (85.0 mm increments) constructions. Sprocket pockets are on 85.0 mm centers. Both versions have same chain height, share same sprockets, and are identifiable by orange TwistLock plugs. Read More

Computer Hardware & Peripherals, Mechanical Components and Assemblies

3U CompactPCI Chassis has 13 slots and 3 power supplies.

Jan 08, 2002

cPCIS-2103 19 in. rack mountable or table top enclosure is fully PICMG 2.0 compliant, and supports up to 12 application peripheral devices. It features space for system CPU; 3 redundant, hot swappable power supplies; and 1 PCI-to-PCI bridge. In 4U high form factor, cPCIS-2103 is capable of assembling 3U CompactPCI cards in its EMC/EMI resistant chassis. System configuration is also offered with... Read More

Electronic Components & Devices, Mechanical Components and Assemblies

Reversed PC Chassis makes cabling easier.

Jan 07, 2002

Backwards RBC PC chassis puts expansion-card connectors, switch, drive bays and USB port in front for easy access. All-steel heavy duty rack-mount chassis is 19 in. wide at flanges, 4 rack units (7 in.) high, and 17.9 in. deep. It is available in 14-slot passive backplane or ATX motherboard versions. Applications include test lab and industrial control tasks that require convenient front access... Read More

Mechanical Components and Assemblies, Mechanical Power Transmission

Mounted Units are fabricated from stainless steel.

Jan 04, 2002

Stainless Steel Bearing inserts and housings provide load carrying capacity and corrosion resistance. Units feature solid base, which prevents contaminants from collecting in gaps, and silicon seals to discourage bacteria growth. They are suitable for applications in highly corrosive settings. Available shaft sizes include: pillow blocks from 0.75 to 1.5 in., flanges (2 bolt and 4 bolt) from 0.75... Read More

Mechanical Components and Assemblies

Linear Guides are self-aligning to absorb mounting errors.

Jan 02, 2002

Miniature LH Series, designed with 50 deg contact angle, provide large vertical load capacity and good rigidity. Guides are made from stainless steel, and have 4 row offset Gothic arch groove configuration for 2 point contact and high impact resistance. Ball cage for size 10 and 12 provides ball retention when bearings are removed from rail. Maximum rail lengths range from 376 to 800mm. Read More

Mechanical Components and Assemblies, Mechanical Power Transmission

Couplings and Collars are used in wet applications.

Jan 02, 2002

Stainless Steel Collars, Couplings, and Shaft Adapters are resistant to washdowns, detergents, harsh chemicals, solvents, fuels, and salt water. Collars include 1-piece, 2-piece, hinged, and set-screw designs in bore sizes from 1/8 to 6 in. I.D. Rigid couplings are available in 1-, 2- and 3-piece designs. Products are suitable for use as drive system components in water treatment, pollution... Read More

Mechanical Components and Assemblies

Cable Carrier operates at 66 dB.

Jan 02, 2002

E4/101 Energy Chain System® is made of high tensile and compressive engineered polymers. Dampening element reduces noise without hindering speed or performance. Beveled edges on glide surface also dampen travel noise, while smooth side plate design ensures carrier's resistance to contaminants. Applications include high-speed material handling S/R systems, gantry robots, cranes, assembly plant... Read More

Mechanical Components and Assemblies

Linear Guides feature low profile.

Dec 21, 2001

Drylin® N linear guides feature polymer gliding elements that run in anodized aluminum rail, providing oil-free and maintenance-free operation. They are suitable for environments prohibiting use of lubricated guides. Applications include test instruments, packaging machinery, assembly machinery and material-handling devices. Four sizes are available. Read More

Mechanical Components and Assemblies

Pressure Packing keeps compressors cool.

Dec 18, 2001

Thermosleeve packing for reciprocating compressors eliminates need for direct water cooling of packing assembly. It provides direct path for heat conduction from packing assembly to cylinder housing using cup and expanding sleeve. Packing installs in existing cylinders and may be reconditioned. Thermosleeve is also suitable for air cooled compressors. Read More

Mechanical Components and Assemblies

Transition Guides feature snap-in mounting.

Dec 11, 2001

cPCI-T Series(TM) Transition Guides are designed specifically for compact PCI (cPCI(TM)) applications, and are fully compliant to IEEE 1101.10 and PICMG 2.16 CompactPCI® specifications. Manufactured from UL rated 94V-0, ABS material for rigidity and strength, cPCI-T Guides support rear I/O as well as modified architectures. Available in red or white, guides can be ordered with or without... Read More

Mechanical Components and Assemblies

Die Lifters move tools in and out of press.

Dec 11, 2001

Spring loaded and hydraulic die lifters enable easy movement of heavy dies, molds, fixtures, tools and pallets for metal stamping and plastic injection molding. Upon activation, lifters raise die 0.08 to 0.16 in. above bolster, allowing die movement. When pressure is released, die lowers into bolster. Lifters move dies in several directions for proper positioning. They are available in four... Read More

Mechanical Components and Assemblies

Hydraulic Cylinders work for pulling or tensioning.

Dec 11, 2001

Hydraulic pull cylinders come in 2 or 5 ton capacities with 5 in. of stroke. Made of high quality steel, cylinders incorporate threaded piston and base ends for easy attachment of tooling or accessories. They have plated pistons for corrosion resistance, and 3/8 in. NPT ports with quick disconnect couplers. Optional clevis attachment is available for piston or base end of pull cylinders. Read More

Mechanical Components and Assemblies

Rodless Pneumatic Cylinder works in temperatures to 500 ºF.

Dec 11, 2001

OSP Series Thermocylinder can be used for door opening and transfer in extreme temperature applications. It uses heat transfer and thermodynamic principles to allow coolant to pass through entire length of cylinder. As coolant passes through, heat energy is absorbed and barrel behaves similar to water jacket. This keeps heat away from cylinder bore where plastic and rubber parts are used. Read More