Mechanical Components and Assemblies

Display & Presentation Equipment, Mechanical Components and Assemblies, Sensors Monitors & Transducers, Test & Measuring Instruments

Telairity Redefines Real-Time Encoding With Its Next-Generation TVP Technology at NAB 2015

September 22, 2015

Telairity's new TVP840™ video processor allows creation of a wide array of new smaller, lower-power, more capable realtime encoders than previously possible SANTA CLARA, Calif. – Telairity today announced a new high watermark in digital compression: a line of studio and mobile encoders using technology that redefines how real-time encoders should be designed. Telairity is a global leader... Read More

Fluid & Gas Flow Equipment, Mechanical Components and Assemblies

Valve Cages help prevent workplace injuries.

September 21, 2015

Made of corrosion-resistant steel, ZVI Valve Cages have large rounded ports which can be directly fastened to valve. ZVI Valve Cage-Integral features ZVI StraightFlo Valve and does not need to be removed during servicing, installation, or removal of valve from cylinder. ZVI Valve Cage-Removable can be used with ZVI SF Valve or with conventional valves. Based on Modular Reed Valve technology,... Read More

HVAC, Mechanical Components and Assemblies

Centrifugal Impeller suits limited space applications.

September 21, 2015

Available in single or 3-phase voltages, TMK Motorized AC Impeller is completely speed controllable. Impeller and dual frequency 50/60 Hz motor are located directly in airstream, where impeller acts as rotating heat sink with optimized heat dissipation and efficient motor cooling. Housed version TMK-H eases installation and minimizes assembly time. Both are equipped with BC airfoil wheel and... Read More

Architectural and Civil Engineering Products, Materials & Material Processing, Mechanical Components and Assemblies, Plant Furnishings & Accessories, Services

Bedford Reinforced Plastics to Exhibit at 2015 Railway Interchange Exhibition in Minneapolis, Minnesota

September 21, 2015

BEDFORD, Pa.,  - Bedford Reinforced Plastics, a leading manufacturer of fiberglass-reinforced polymer (FRP) structural profiles, pultruded and molded grating, will be exhibiting at the 2015 Railway Interchange Exhibition at the Minneapolis Convention Center in Minneapolis, Minnesota from October 4-7th. The Railway Interchange 2015 is the largest combined railway exhibition and... Read More

Mechanical Components and Assemblies

Digital Signal Processors support IoT applications.

September 17, 2015

Implementing enhanced version of ARCv2DSP instruction set architecture, DesignWare® ARC® EM9D and EM11D Processors combine RISC and DSP processing with support for XY memory system. Devices enable sustained throughput of one 32 x 32 MAC operation or two 16 x 16 MAC operations per clock cycle with minimal energy and area overhead. Processors also support full integer, fractional divide,... Read More

Electronic Components & Devices, Mechanical Components and Assemblies, Plant Furnishings & Accessories

Plastic Electronics Enclosures withstand industrial environments.

September 16, 2015

Molded in fiberglass-reinforced polycarbonate, SK Series comes in 12 sizes from 2 x 2 in. to 14 x 10 in. Metric knockouts in base are standard. Suited to protect outdoor applications with IP67 rating for temporary submersion, SG Series comes in 7 sizes from 3 x 3 in. to 11 x 9 in. and is molded from impact resistant and flame-retardant polycarbonate. Clear cover option is available. Both... Read More

Electronic Components & Devices, Mechanical Components and Assemblies

Universal Electronic Housing System fosters design flexibility.

September 16, 2015

Constructed of ABS, EH electronic housings are available in 7 overall widths, 2 overall heights, and 3 cover versions to afford 100+ possible combinations. System works with range of PCB connection technologies and thereby facilitates customization to application requirements. Options for number of PCBs and orientation promote design flexibility, and electronics housing can be snapped onto DIN... Read More

Mechanical Components and Assemblies, Mounting & Attaching Products

Runtastic Selects QuickLogic' Sensor Hub and SenseMe Algorithm Library for Its New Runtastic Moment Wearable

September 15, 2015

  • QuickLogic's ArcticLink 3 S2 Sensor Hub enables the Runtastic Moment to deliver up to six months of battery life. 
  • QuickLogic's comprehensive SenseMe Algorithm Library delivers world-class accuracy while optimizing battery life. 
Sunnyvale, CA – QuickLogic Corporation® (NASDAQ: QUIK), the innovator of ultra-low power programmable sensor processing... Read More

Mechanical Components and Assemblies

New Brother Speedio Added!

September 10, 2015

American Gear, Inc. would like to announce the addition of the Brother Speedio S500X1 Compact Machining Center.  This machine brings higher levels of productivity to American Gear, Inc. due to increased spindle rpm and industry leading axis acceleration.   The Brother can multitask from high-efficiency machining to heavy-duty machining as required.  Bringing in the new machine... Read More

Construction Equipment and Supplies, Mechanical Components and Assemblies

Snow Pushers enhance loader/tractor/skid-steer capabilities.

September 8, 2015

Available in 8 and 10 ft widths, 36-Series Snow Pushers are available for skid steers and tractors with loaders that use Universal skid steer quick attach system as well as 400/500 Series John Deere loaders and loaders using Euro/Global tool carrier. Reversible 1.5 x 8 in. premium rubber cutting edge allows use on asphalt and other surface types. Features include 36 x 36 x 5/16... Read More

Electronic Components & Devices, Mechanical Components and Assemblies, Test & Measuring Instruments

eInfochips' Eragon410 SoM Powered by Qualcomm Enables Embedded Designs with Low Power, Faster Processing and Smaller Packaging

September 8, 2015

SUNNYVALE, California – The Eragon410 Development Kit, System-on-Module (SoM) and eInfochips Design Services Accelerate Solutions for Industrial Building Automation, Security Surveillance, Robotics, Infotainment & Displays (Automotive and Avionics), Media Broadcast and Digital Signage eInfochips® (http://www.einfochips.com) has announced their new... Read More

Mechanical Components and Assemblies

Kontron to Deploy 6th Gen Intel® Core(TM) Processor Family

September 8, 2015

Embedded specialist to launch new boards and modules featuring powerful Intel® technology  Augsburg, Germany – Kontron, a global leader in embedded computer technology (ECT), today announced that the latest 6th generation Intel® Core™ Processor will power new Kontron boards and modules to be released in early 2016.  With these boards, Kontron's customers can take full... Read More

Electronic Components & Devices, Mechanical Components and Assemblies

CEVA's Bluetooth Low Energy IP Powers NXP QN9000 Series of Bluetooth Smart SoCs

August 25, 2015

RivieraWaves Bluetooth Smart IP enables NXP to deliver ultra-low power performance for long battery-life in next-generation wearable, smart home, digital health, and IoT products MOUNTAIN VIEW, Calif. -- CEVA, Inc. (NASDAQ: CEVA), the leading licensor of DSP and IP platforms for cellular, multimedia and connectivity, today announced that NXP Semiconductor's QN9000 Series of Bluetooth®... Read More

Materials & Material Processing, Mechanical Components and Assemblies

Bedford Reinforced Plastics to Exhibit at 2015 WEFTEC Exhibition in Chicago, Illinois

August 24, 2015

BEDFORD, Pa. – Bedford Reinforced Plastics, a leading manufacturer of fiberglass-reinforced polymer (FRP) structural profiles, pultruded and molded grating, will be exhibiting at the 2015 Water Environment Federation's Annual Technical Exhibition and Conference (WEFTEC®) at McCormick Place in Chicago, Illinois from September 26-30th. Founded in 1928, WEFTEC has not only... Read More

Materials & Material Processing, Mechanical Components and Assemblies

NORSOK Approvals for Sandvik Duplex and Super-duplex Solid Bar

August 19, 2015

Sandvik has achieved NORSOK® certification for its duplex and new super-duplex solid bar opening up greater application opportunities as they all meet the exacting demands and standards of the oil gas industry. Extensive work by Sandvik has resulted in the new NORSOK® M-630, Edition 6 accreditation being secured for duplex solid bar grades Sandvik SAF 2205™ and Sandvik SAF 2507™.... Read More

Mechanical Components and Assemblies, Services, Test & Measuring Instruments

Rayotek: Seeing Under Pressure

August 19, 2015

Rayotek Safer Viewing of Hostile Marine Environs. Rayotek designed the 7.5 ft. diameter glass sphere for Triton’s 36000/3 Submersible. According to Bill Raggio, Rayotek Scientific isn’t specifically a maritime company, but it definitely is part of San Diego’s “Blue Economy.” “We’re both an engineering company and a sapphire and glass manufacturer. We make specialized glass for... Read More

Mechanical Components and Assemblies

Eurocom Announces Plans of Supporting Socket Based Skylake Intel Core i7-6700K CPUs in Line of High Performance Laptops

August 11, 2015

Eurocom is announcing plans to support socket based Intel Skylake desktop 6th Gen Intel® Core™ i7-6700K processors in a line of high performance, fully upgradeable, LGA 1151 socket based laptops. "Our customers can again combine the most advanced power of socket based, desktop Intel processors and high performance graphics into a sleek and menacing, fully upgradeable, long lasting laptops... Read More

Computer Hardware & Peripherals, Electronic Components & Devices, Mechanical Components and Assemblies

Heterogeneous Multi-Processing SoC supports Micrium RTOS kernels.

August 10, 2015

Combining 7 processors, Xilinx All Programmable Zynq® UltraScale+™ MPSoC enables development of flexible, standards-based platforms. Micrium’s µC/OS-II® and µC/OS-III® kernels and full suite of RTOS components run on ARM Cortex A53 and Cortex R5 CPUs as well as Xilinx MicroBlaze™ FPGA-based soft processor core. This lets users select single OS for all their... Read More

Computer Hardware & Peripherals, Mechanical Components and Assemblies

Cadence to Showcase IP and Processor Technology at 2015 Flash Memory Summit

August 10, 2015

SAN JOSE, Calif.,  - Cadence Design Systems, Inc. (NASDAQ: CDNS) today announced that it plans to exhibit its latest intellectual property (IP) and processor technologies at this year's Flash Memory Summit at booth 616 from August 11 to 13, 2015, in Santa Clara, CA. WHO: Cadence is scheduled to demonstrate its latest flash memory IP, verification models, and Tensilica® offload processor... Read More

Automatic ID, Mechanical Components and Assemblies, Sensors Monitors & Transducers

QuickLogic and Sensory Partner to Provide Always Listening, Deeply Embedded Voice Recognition at Ultra-Low Power

August 7, 2015

  • Hardened system blocks specifically designed for voice processing applications provide extremely power efficient, always-listening voice capability
  • Less than 350 microAmps always-on voice trigger
  • Supports advanced voice processing, including voice recognition, without cloud connection requirement
Sunnyvale, CA — QuickLogic Corporation (NASDAQ: QUIK), the... Read More