Mechanical Components and Assemblies

Mechanical Components and Assemblies

Synopsys Demonstrates Industry's First MIPI D-PHY IP Operating at 2.5 Gbps per Lane on TSMC 16-nm FinFET Plus Process

October 26, 2015

Demonstration Validates Performance and Compliance of DesignWare MIPI D-PHY for Low-Risk Integration into Mobile SoCs MOUNTAIN VIEW, Calif. - Highlights:     --  Industry's first demonstration to be unveiled at the MIPI® Alliance         Open and Demo Day in Taipei, October 29, 2015     --  Synopsys' silicon-proven, compliant... Read More

Electronic Components & Devices, Mechanical Components and Assemblies, Services

Altera Demonstrates Security and System Acceleration Solutions at MILCOM 2015

October 26, 2015

Altera 20 nm FPGAs and SoCs Meet NSA IAD Secure Implementation Guidelines (SIG) SAN JOSE, Calif. – Altera Corporation (NASDAQ: ALTR) is demonstrating programmable logic-based security and system acceleration solutions for military grid communications, data centers, satellite communications and radar systems at MILCOM 2015 in Tampa, Florida, from October 26 to 28, 2015.  Show attendees can... Read More

Mechanical Components and Assemblies

Seginus Inc. is Pleased to Introduce EHRP607965, EHR23079-1281, EHR30300-1413, EHR23080-1903, EHR23088-1321, EHR30300-1414, EHR23080-1902, Carbon Brushes

October 23, 2015

These carbon brushes are eligible for installation on various aircraft DC Starter-Generators. The Starter-Generator assemblies, when in operation, deliver current to the rotating armature’s commutator when functioning in the starter mode and receive current when operating in the generator mode. Brushes are eligible for installation on Thales Avionics Electrical Systems and various Goodrich... Read More

Mechanical Components and Assemblies

Seginus Inc. is Pleased to Introduce the EHRP602635 Carbon Brush

October 23, 2015

The EHRP602635 carbon brush is eligible for installation on DASSAULT AVIATION Aircraft DC Starter-Generators. The Starter-Generator assembly houses eight (8) brushes and when in operation deliver current to the rotating armature’s commutator when functioning in the starter mode and receive current when operating in the generator mode. Brushes are eligible for installation on AUXILEC DC... Read More

Construction Equipment and Supplies, Mechanical Components and Assemblies

Spreader Attachment enhances Bobcat utility vehicle versatility.

October 22, 2015

Powered by 12 Vdc drive motor, spreader attachment mounts in utility vehicle cargo box of 2015 model year Bobcat® 3400/3600/3650 utility vehicles to spread sand and salt for winter maintenance. Two variable-speed dials on dash-mounted control allow independent adjustment of auger and spinner, and 3-stage baffle lets operators adjust material flow. Salt/sand distribution range is 5–38... Read More

Materials & Material Processing, Mechanical Components and Assemblies

Seginus Inc. is Pleased to Introduce the EHRP607965 Carbon Brush

October 22, 2015

The EHRP607965 Carbon Brush is eligible for installation on ATR aircraft DC Starter-Generators. The Starter-Generator Assembly houses eight (8) brushes. Brushes are eligible for installation on Thales Avionics Electrical Systems DC Starter-Generator, p/n 8260-121,-123 Model Eligibility: ATR42-200, ATR42-300, ATR42-320, ATR42-500, ATR72-101, ATR72-102, ATR72-201, ATR72-202, ATR72-212, ATR72-212A... Read More

Fluid & Gas Flow Equipment, Mechanical Components and Assemblies, Optics & Photonics

CGO Launches Web-Based Optical Material Sourcing

October 21, 2015

Custom Glass Optics, LLC was launched in June of this year as a web based solution for quick-turn optical substrate and components.  CGO offers access to a wide variety of glass materials and optical components, providing the customer with a consolidated offering of available inventories from the most reputable sources in the industry. The site is configured for simple navigation and on-line... Read More

Mechanical Components and Assemblies, Thermal & Heating Equipment, Transportation Industry Products

Seginus Inc. is Pleased to Introduce FAA PMA Approved Replacement Parts for Hamilton Sundstrand Propeller De-Ice Brush Block Assemblies

October 20, 2015

The Seginus Inc. Teflon pad EH789285-1 and carbon brush EH738466-6 are applicable for installation on Hamilton Sundstrand 782689-X de-ice brush blocks. The 782689-X brush block is installed on various aircraft. Model Eligibility: DHC-8-100, -200, -300 ATR 42, ATR 72 CL215T, CL415 XIAN Y7-200A For more specific model eligibility details, please see the supplements section of our website. For sales... Read More

Mechanical Components and Assemblies

VPX User-definable Power and Ground Development System for Open VPX Military Applications

October 19, 2015

Verotec is supplying configured TecSYS 3U VPX development chassis to a major US-based defense contractor for use in its new product developments. The half-width 3U KM6-RF subrack is the centerpiece of a 6U TecSYS thermally managed, powered, cooled and EMC screened desktop system. The core of the systems is a 6-Slot 10 layer VPX Power and Ground backplane fitted with the high performance, high... Read More

Architectural and Civil Engineering Products, Chemicals & Chemical Processing, Mechanical Components and Assemblies, Services

Bedford Reinforced Plastics to Exhibit at 2015 LAGCOE Expo in Lafayette, Louisiana

October 19, 2015

BEDFORD, Pa. - Bedford Reinforced Plastics, a leading manufacturer of fiberglass-reinforced polymer (FRP) structural profiles, pultruded and molded grating, will be exhibiting at the 2015 Louisiana Gulf Coast Oil Exposition (LAGCOE) at the Cajundome and Convention Center in Lafayette, Louisiana from October 27-29. Held biennially since 1955, LAGCOE is one of the world's first oil and gas... Read More

Electronic Components & Devices, Mechanical Components and Assemblies

Power Line Common Mode Choke Coils serve automotive applications.

October 16, 2015

Capable of handling currents up to 5.6 A and operating temperature from -55 to +150°C, PLT5BPH Series AEC-Q200-compliant, wire wound-type, common mode choke coil targets automotive power line noise suppression. Case measures 5.0 x 5.0 mm, and common mode impedance ratings reach up to 500 Ω at 10 MHz. Due to benefits delivered to power line, this series is also suited for base station... Read More

Electronic Components & Devices, Mechanical Components and Assemblies

Curtiss-Wright and DRS Technologies Collaborate to Bring U.S. Army's MORA Architecture Compliant RF Capabilities to Rugged Embedded COTS Systems

October 15, 2015

NEW OPENVPX-BASED RF SYSTEMS DELIVER STANDARD RF AND MICROWAVE MODULES AND SYSTEMS MODULES IN SUPPORT OF MODULAR OPEN RF ARCHITECTURE (MORA) AUSA 2015, WASHINGTON, D.C. (Booth #6717) – Curtiss-Wright Corporation (NYSE: CW) today announced that its Defense Solutions division is collaborating with DRS Technologies, Inc., a Finmeccanica Company, to bring RF capabilities to a new range of rugged... Read More

Electronic Components & Devices, Mechanical Components and Assemblies

Microsemi and Athena Announce FPGA Cores with Strong DPA Countermeasures for Cryptography Users

October 15, 2015

Powerful Anti-Tamper Security Microprocessor Technology Available Immediately as Soft Intellectual Property for SmartFusion2 and IGLOO2 FPGAs ALISO VIEJO, Calif. - Microsemi Corporation (Nasdaq: MSCC), a leading provider of semiconductor solutions differentiated by power, security, reliability and performance, and The Athena Group, Inc. (Athena), a leading provider of security, cryptography,... Read More

Electronic Components & Devices, Mechanical Components and Assemblies

Qualcomm and Xilinx Collaborate to Deliver Industry-Leading Heterogeneous Computing Solutions for Data Centers with New Levels of Efficiency and Performance

October 14, 2015

- Companies are poised to address evolving technology needs of next-generation cloud computing infrastructure - SAN DIEGO and SAN JOSE, Calif. - Qualcomm Incorporated (NASDAQ: QCOM) through its subsidiary, Qualcomm Technologies, Inc., and Xilinx, Inc. (NASDAQ: XLNX), today announced a strategic technical collaboration to deliver industry-leading heterogeneous computing solutions with new levels... Read More

Electronic Components & Devices, Mechanical Components and Assemblies, Test & Measuring Instruments

Altera DOCSIS 3.1 Remote PHY Design Enables Distributed Cable Networks

October 14, 2015

San Jose, Calif. – Altera Corporation (NASDAQ: ALTR) is attending the SCTE Cable Expo in New Orleans, October 13-16 (Booth #3135), to demonstrate a new, flexible and upgradeable silicon solution for multi-service operators (MSOs) that enables the next-generation of cable architectures at the same low power consumption levels as ASICs. The Altera DOCSIS Remote (MAC) PHY design, which is being... Read More

Construction Equipment and Supplies, Mechanical Components and Assemblies

More Options with Double-Edge Track

October 13, 2015

Modern Linear has increased the length of our successful double track, and DT linear guide product offering. The track lengths have increased from 4 feet to 12 feet in a single section. The double track product line has been extremely successful since its introduction in 2008.  It offers a compact alternative to two single edge tracks. Installation is easier and quicker than single edge track... Read More

Material Handling & Storage, Mechanical Components and Assemblies, Packaging Products & Equipment, Test & Measuring Instruments

New Special Stock Program from MJS Packaging

October 13, 2015

From time to time, MJS Packaging has excess or obsolete inventory on certain items.  We are now featuring these special stock items on our website for your easy reference.  Current offerings include closures, a HDPE bottle and a measuring scoop.  All product offerings and quantities are subject to change. Read More

Material Handling & Storage, Mechanical Components and Assemblies

Repairable Round Line Cylinders offer mounting, threading options.

October 13, 2015

In addition to magnets and bumpers as standard features, 488 Series offers optional adjustable cushions. Products come in metric sizes and offer 17 mounting styles; full-flow port thread types (BSPT, NPTF, G, and M7); and rod end configurations. Constructed to accommodate cycle rates found in packaging and automotive applications, pneumatic cylinders have flush round profile tube and... Read More

Mechanical Components and Assemblies

Modular 4U Chassis supports OpenVPX applications.

October 12, 2015

Available with various options to adapt to application, VPX4V180 Series includes base chassis that is suited for 3–18 medium powered OpenVPX boards. For higher power applications, larger bottom-to-top cooling fans can be used as well as air baffles. For front-to-rear cooling, 5U chassis is available. VPX4V180 Series includes EMC options with integrated components and supplemental gasketing.... Read More

Mechanical Components and Assemblies

Image Processor powers surveillance, automotive applications.

October 12, 2015

Vision image processor IP cores of VIP7000 series feature Algorithm-Level Programmability™, where basic application development element is at algorithmic, rather than arithmetic, level. Enabling new functionality in existing silicon, architecture provides configurable instructions and hardware acceleration elements. Functionality provides method to incorporate parallel computing in... Read More