Mechanical Components & Assemblies

Mechanical Components & Assemblies

Computer Chassis targets gaming market.

September 25, 2015

Made of ABS steel, MVP Series measures 400 x 180 x 412 mm without bezel. Mid-sized unit supports bottom PSU position and VGA graphic card length up to 320 mm. Built-in USB 3.0 port on top panel provides easy access and quick data transfers. Available in ATX/Micro ATX and Mini-ITX form factors, chassis supports variety of drive bays, including one 5.25 in. external, two 5.25 in. internal, as well as four 3.5 in. and two 2.5 in. drive bays. Read More

Controls & Controllers, Mechanical Components & Assemblies, Sensors, Monitors & Transducers

Scalable Turret Drive Servo System targets ground vehicles.

September 22, 2015

With TDSS Turret Aiming and Stabilization Drive System, integrators can select exact solution that platform requires, from manually operated drive up to highly sophisticated, stabilized drive system. Components include rotary and linear gear drives, motor controllers, gyroscopes, hand controllers, and system software. Offered in 3 pre-defined configurations plus 1 custom option, system provides slow speed tracking of less than 0.3 mrad/s, max speed of 1 rad/s, and acceleration of 2 rad/s2. Read More

Mechanical Components & Assemblies

Free Swing Door Closers offer comfort hold-open function.

September 21, 2015

Installed on door as single component, GEZE TS 5000 surface mounted door closer and GEZE Boxer electro-mechanical concealed door closer combine free swing and hold-open function. Once door has been opened, it can be passed through in either direction without additional force since closer remains under electrical bias voltage. Comfort hold-open function enables door to remain locked in position at end of free swing area without closing in uncontrolled manner or jamming in partially closed position. Read More

Fluid & Gas Flow Equipment, Mechanical Components & Assemblies

Valve Cages help prevent workplace injuries.

September 21, 2015

Made of corrosion-resistant steel, ZVI Valve Cages have large rounded ports which can be directly fastened to valve. ZVI Valve Cage-Integral features ZVI StraightFlo Valve and does not need to be removed during servicing, installation, or removal of valve from cylinder. ZVI Valve Cage-Removable can be used with ZVI SF Valve or with conventional valves. Based on Modular Reed Valve technology, SF Valve can be applied to all gas compression applications. Read More

HVAC, Mechanical Components & Assemblies

Centrifugal Impeller suits limited space applications.

September 21, 2015

Available in single or 3-phase voltages, TMK Motorized AC Impeller is completely speed controllable. Impeller and dual frequency 50/60 Hz motor are located directly in airstream, where impeller acts as rotating heat sink with optimized heat dissipation and efficient motor cooling. Housed version TMK-H eases installation and minimizes assembly time. Both are equipped with BC airfoil wheel and provide capacities to 5,060 cfm. Matching capacitors and inlet cones are available. Read More

Mechanical Components & Assemblies

Digital Signal Processors support IoT applications.

September 17, 2015

Implementing enhanced version of ARCv2DSP instruction set architecture, DesignWare® ARC® EM9D and EM11D Processors combine RISC and DSP processing with support for XY memory system. Devices enable sustained throughput of one 32 x 32 MAC operation or two 16 x 16 MAC operations per clock cycle with minimal energy and area overhead. Processors also support full integer, fractional divide, and square root operations as well as unaligned loads/stores and bitstream parsing. Read More

Electronic Components & Devices, Mechanical Components & Assemblies

Universal Electronic Housing System fosters design flexibility.

September 16, 2015

Constructed of ABS, EH electronic housings are available in 7 overall widths, 2 overall heights, and 3 cover versions to afford 100+ possible combinations. System works with range of PCB connection technologies and thereby facilitates customization to application requirements. Options for number of PCBs and orientation promote design flexibility, and electronics housing can be snapped onto DIN rails without tools for accelerated installation or mounted directly on wall. Read More

Electronic Components & Devices, Mechanical Components & Assemblies, Plant Furnishings & Accessories

Plastic Electronics Enclosures withstand industrial environments.

September 16, 2015

Molded in fiberglass-reinforced polycarbonate, SK Series comes in 12 sizes from 2 x 2 in. to 14 x 10 in. Metric knockouts in base are standard. Suited to protect outdoor applications with IP67 rating for temporary submersion, SG Series comes in 7 sizes from 3 x 3 in. to 11 x 9 in. and is molded from impact resistant and flame-retardant polycarbonate. Clear cover option is available. Both NEMA 4X plastic enclosures carry IK 08 impact rating and UL508 Type 4X and 12K listing. Read More

Mechanical Components & Assemblies, Construction Equipment & Supplies

Snow Pushers enhance loader/tractor/skid-steer capabilities.

September 8, 2015

Available in 8 and 10 ft widths, 36-Series Snow Pushers are available for skid steers and tractors with loaders that use Universal skid steer quick attach system as well as 400/500 Series John Deere loaders and loaders using Euro/Global tool carrier. Reversible 1.5 x 8 in. premium rubber cutting edge allows use on asphalt and other surface types. Features include 36 x 36 x 5/16 in. pusher side plates, 7-gauge moldboard with two 4 in. industrial C channels, and adjustable steel skid shoes. Read More

Mechanical Components & Assemblies

Surveillance Chassis supports NAS and NVR applications.

August 21, 2015

Constructed of heavy-duty steel with 7.88 x 12.29 x 11.46 in. dimensions, Model WMC-906M accommodates up to five 3.5 in. mobile racks, one 3.5 in. or 2.5 in. internal drive bay with 2 USB 2.0 front ports, and 1 expansion slot. Mini-ITX motherboard chassis comes with one 120 mm ball bearing fan for temperature control and supports PS/2 ATX or Mini Redundant Power Supply. Equipped with key lock for security, wallmount/tower unit provides easy access for quick removal of hard drive. Read More

Electronic Components & Devices, Computer Hardware & Peripherals, Mechanical Components & Assemblies

Heterogeneous Multi-Processing SoC supports Micrium RTOS kernels.

August 10, 2015

Combining 7 processors, Xilinx All Programmable Zynq® UltraScale+™ MPSoC enables development of flexible, standards-based platforms. Micrium’s µC/OS-II® and µC/OS-III® kernels and full suite of RTOS components run on ARM Cortex A53 and Cortex R5 CPUs as well as Xilinx MicroBlaze™ FPGA-based soft processor core. This lets users select single OS for all their embedded software needs on chip. Other features include integrated peripherals, safety/security features, and advanced power management. Read More

Mechanical Components & Assemblies

Open Frame VPX Development Chassis has configurable design.

August 3, 2015

Offering up to 8 OpenVPX slots in 1.0 in. pitch, VPXD0800 is designed for OpenVPX backplanes and allows other standard backplane architectures to be utilized. Modular card guides can be spaced in 0.2 in. increments to allow various slot pitches, and option for conduction-cooled module card guides is supported. Along with AC or DC PSU options up to 900 W and PSUs designed to VITA 62 for VPX systems, VPX backplanes in several slot sizes and configurations (including custom) are available. Read More

Electronic Components & Devices, Mechanical Components & Assemblies

Security, Compression Processors enhance data center operations.

July 27, 2015

Targeting enterprise and virtualized cloud data centers, NITROX V security processors and adapters integrate up to 288 purpose-built security cores with optimized compression engines and virtualization hardware with PCIe Gen 3 and Interlaken interfaces. Products deliver SSL performance with 120K RSA Ops/Sec and 300K P256 ECC Ops/sec and bulk encryption performance of 100 Gbps for diverse protocols, flexibility to support emerging algorithms and protocols, and various I/O options. Read More

Machinery & Machining Tools, Portable Tools, Mechanical Components & Assemblies

Programmable Hydraulic Tapping Arms combine power and efficiency.

July 14, 2015

Promoting machine tool utilization efficiency and shortening cycle times, FlexArm Hydraulic Tapping Arms run tapping and threading operations offline while CNC is running. Tapping 1 ½ in. in mild steel at 110 rpm is made possible due to Hydraulic Power Packs and gearboxes, and tapping and threading with FlexArm while lathe is running eliminates thread milling operations. End-users can program exact RPM for forward and reverse, and programmable depth control allows consistent tapping depth.
Read More

Machinery & Machining Tools, Mechanical Components & Assemblies

Distance Ring enables individual height alignment.

July 7, 2015

With Z1814/... Distance Ring, position of heel blocks on Z1812/... and Z1813/... mold slide units can be aligned without need to dismantle slide unit. Hardened distance ring is ground to corresponding dimensions and can then be used for individual height adjustment of slide unit, as well as for offsetting production tolerances and aligning replacement parts. Read More

Machinery & Machining Tools, Robotics, Mechanical Components & Assemblies

High-Throughput Stringer solders solar cells in 2 sec cycle.

July 2, 2015

Designed to produce full and half-cell strings with up to 5 busbars, STRINGER TT1800 utilizes single track technology and offers throughput of up to 50 MWp per year. Cycle time of 2 seconds enables production of up to 27 modules/hr, and throughput of complete standardized system – 2 STRINGER TT1800 and one layup – is rated at 100 MWp. Layup's 6-axis robot consists of flexible package that allows system to be adapted to different applications or cell and glass sizes. Read More

Mechanical Components & Assemblies

Electric Cylinder uses roller screw drive technology.

July 2, 2015

Utilizing planetary rollers in place of ball bearings, XFC Series spans 6 frame sizes from 75–190 mm and can support max thrust load up to 80,000 lb. Thrust capability, coupled with all-steel frame based on standard metric hydraulic cylinder construction, provides virtually seamless migration from hydraulic to full electrometrical motion. Available in inline and parallel motor mount options, cylinder features max stroke of 79 in., max speed of 40 ips, and max acceleration of 2 G. Read More

Mechanical Components & Assemblies

Electromechanical Cylinder offer advanced control under high forces.

July 2, 2015

Driven by ball or planetary screw assemblies, EMC Heavy Duty (HD) electromechanical cylinders are sturdy and ready-to-install units intended for machinery and equipment as well as outdoor use. Force, position, and speed can be parameterized by user and adapted at all times to new tasks via drive system. Without additional position sensor, EMC-HD achieves repeatability accuracy of up to ±0.01 mm for any number of freely selectable positions within travel range of up to 1,200 mm. Read More

Fluid & Gas Flow Equipment, Mechanical Components & Assemblies

IP67 Bulkhead Housing Sets New Connector Baseline.

July 2, 2015

In locked state, Han® B IP67 bulkhead mounted housings provide IP66 and IP67 protection to allow temporary, full immersion in water. Flange protects gasket seal, preventing water from penetrating connector, while circumferential collar prevents seal from sliding inwards or outwards and thereby provides additional protection against water ingress. Available in 6B, 10B, 16B, and 24B sizes, housing uses Han-Easy Lock® locking system to maximize contact pressure. Read More

Fasteners & Hardware, Mechanical Components & Assemblies

Carbon-Graphite Piston Rings seal high-pressure gases.

July 1, 2015

Carbon-graphite piston rings, used in conjunction with carbon-graphite guide rings or carrier rings that hold piston centered on cylinder bore, are self-lubricating and seal high-pressure gas in applications requiring compressed gases that do not contain oil or grease. Guide rings can be either solid rings or segmented rings with butt joints. At least two rings with off-set segment joints are needed to seal to pressures of 100 psi. Extra sets of rings are required to seal higher pressures. Read More