Guill Tool & Engineering Co.
West Warwick, RI 02893
Nov 05, 2009 Designed to manufacture PE or HDPE piping from 4-20 in. in diameter, Model 2030 is suited for marine, cable, electronics, oil, gas, and water industries. Self-contained system uses combined die and reservoir system for optimal material distribution. Weighing 6,000-10,000 lb, Model 2030 has mounted track and cart that enable handling and maintenance. Cart system tilts die on-the-fly to compensate for catenary effect caused by gravity as extrusion product exits equipment.

Union Process, Inc.
Akron, OH 44313
Nov 05, 2009 Able to process 200-500 lb of limestone/hr, CL-5 Stirred Vertical Ball Mill is suited for wet grinding limestone for flue gas desulphurization in power plants and for mineral grinding. Utilizing 2.5 gal of grinding media, it is equipped with variable frequency drive and 15 hp inverter duty motor. Attritors are top fed with product (approximately 6 mm) and water entering through the top of the mill where they are propelled down into media bed. Final product exits through top side of mill.

Graco Inc.
Minneapolis, MN 55440
Nov 05, 2009 Graco In-Drum agitator is configured as heavy-duty, in-drum, back-geared agitator for 55 gal drums and tanks with pre-installed blades. Able to be installed in less than 30 sec with screw-in installation, product is approved for hazardous locations by ATEX and CE. Interchangeable adapters and couplers are available for different drum configurations, and leak-free gear box eliminates oil contamination risk when mixing materials.

Knuth Machine Tools USA, Inc.
Lincolnshire, IL 60069
Nov 04, 2009 Featuring rigid construction, RSM Series Multi-Functional ID/OD Grinding Machines offer max grinding diameter of 12.5 in., max center distance of 80 in., and infinite variable spindle speeds. Machines are available with in-process measurement and include separate handwheels for manual grinding on X and Y axis. Optimized with hydraulic tailstock, which operates via foot pedal, RSM Series incorporates max 12 x 1.5 x 5 in. wheel diameter, preloaded ball screws, and automatic central lubrication.

Jeio Tech, Inc.
Des Plaines, IL 60018
Nov 03, 2009 Lab Companion Vortex Mixers incorporate low-profile design and rubber feet, allowing stability with minimum vibration and sliding. Products include sensitive touch switch with real-time mixing and VS control knob that indicates mixing conditions by LED lamp. Constructed with chemical-resistant polypropylene exterior, mixers also include built-in safety device for overload protection. Tube holders from 10-25 mm and micro plate holder are available.

CS Unitec, Inc.
Norwalk, CT 06850
Nov 03, 2009 Equipped with 16 A/1,800 W 2-speed motor, PORTAMIX HIPPO PMH 70F operates at load speeds of 140 and 470 rpm. System features Easy-Roll Trolley and balanced Easy-Tilt Cradle, which allows user to pour, accurately place, and spread up to 20 gal of material simultaneously. With helix ribbon and side bars, two 8 in. dia mixing paddles lift and shear product. PMH 70F is suited for cement screeds, grout, mortar, texture coatings, sealants, and adhesives.

OK International, Inc
Suwanee, GA 30024
Nov 03, 2009 Suited for production soldering, touch-up soldering, and SMD rework, MFR-2200 Series features SmartHeat® power and control technology, which responds to load, delivering energy required for each connection, while protecting sensitive components and substrates from damage. One or two hand-piece operation is chosen via front panel switch. With 2 separate power supplies, full power is available for each hand-piece that is in use. Three handpiece options are available.

SABIC Innovative Plastics
Pittsfield, MA 01201
Nov 03, 2009 Optimized for high melt flow without any decrease in toughness, Lexan HFD resins also exhibit ductility that does not negatively affect melt flow. Chemistry permits use down to -40°C and combines 2 monomers to ensure performance in demanding applications. Offered in 5 grades with up to 5% bio content and with/without UV stabilizers, resins allow for creation of thinner-wall parts without risk of cracking upon mold removal. Properties also reduce molded-in stress to avoid birefringence.

Maxim Integrated Products
Sunnyvale, CA 94086
Nov 02, 2009 Supplied in lead-free, 2 x 2.2 mm, 5-pin SC70 package, MAX14541E protects 3-channel data interfaces from ESD spikes up to ±15 kV (Human Body Model). Input capacitance, rated at 6 pF typ, prevents signal distortion in high-speed applications. Meanwhile, leakage current of less than 1 nA results in minimal impact for end application. Array is specified over -40 to +125°C range and suits glucose meters, cell phones, media players, PDAs, and other portable applications.

Printpack, Inc.
Mountain Home, NC 28758
Oct 30, 2009 NeoAffinia(TM) PETG film features matte finish and provides light barrier protection for products negatively impacted by exposure to light. With 70% shrinkage rate, it is suited for highly contoured containers. Shrink and roll fed labels, tamper-evident bands, and heat shrinkable sleeves for multipacks are can be surface printed in up to 10 colors using rotogravure or flexographic printing.

Master Bond, Inc.
Hackensack, NJ 07601
Oct 30, 2009 Qualified for filament winding applications, EP29LP-1 exhibits physical strength that enhances component resistance to thermal shock. It adheres to various substrates, including optical fibers and fibrous reinforcements, and has bond strength of greater than 3,500 psi. With peak exotherm as low as 50°C, this 2-part, optically clear epoxy is resistant to chemicals and offers compound flow, setup, and handling properties suited for large potting and encapsulating applications.

OK International, Inc
Suwanee, GA 30024
Oct 30, 2009 Soldering and rework system, MX-500, is available with MX-PTZ precision tweezer hand-piece that is ergonomically designed to meet requirements for reworking small electronic components, including 0201. Tweezers enable user to remove and replace components, with targeted application of heat, to soldered connections of devices while mechanically gripping component for removal. Tweezer-action and dual-position pitch adjustment enable operator to size pincer-action to component width.

OK International, Inc
Suwanee, GA 30024
Oct 30, 2009 Providing optimal thermal control, PS-900 Soldering System offers repeatability to produce high-quality solder connections quickly. Powered by SmartHeat® Technology which enables system to solder at low temperatures, it requires no calibration. System is suited for demanding applications such as lead-free soldering processes, multi-layer boards, and thermally demanding components.

Stahl USA
Peabody, MA 01960
Oct 30, 2009 Wax filler, EX-FI-13-547 is designed for use in association with "American Lifestyle" finishes on variety of leathers. Opaque wax maintains waterproof resistance in finishes, and should be preheated to 75°C and applied using either padding or roller heated to 65-80°C. High melting point wax flows well with high temperature plating and can be used either alone or blended with other suitable oils or waxes to modify properties.

Davis-Standard Corp.
Pawcatuck, CT 06379-2313
Oct 29, 2009 Available for retrofit to existing 3½ in. Davis-Standard extruders, Hinge-Roll Feedsection offers uniform, consistent feed rate and adjusts automatically based on feed strip size. Feedroll and interior of feedsection are accessible by unfastening 2 swing bolts and lowering attached swing-down cartridge by means of electro-mechanical cylinder. Belt drive eliminates lubrication requirements and belts automatically loosen for feedroll removal.

Bovie Screen Process Printing Co., Inc
Bow, NH 03304
Oct 29, 2009 Germ-Gate(TM) utilizes silver nanoparticles to produce antimicrobial protective coating for membrane switches and graphic overlays, inhibiting spread of odor-causing bacteria and fungus. Silver-based, transparent liquid industrial application is suited for preventing spread of germs in medical industries, and is proven to kill 99.9% of microbes on surfaces coated with product.

Michelman Inc.
Cincinnati, OH 45236
Oct 29, 2009 Michem® Guard 7140 proves rub and abrasion resistance in pigmented and semi-gloss coating, inks and OPVs at addition rates of 2-5%. Solution can be used in coatings on exterior wood and wood composites, interior furniture and flooring as well as inks and OPVs. It can be applied to matte coatings and varnishes at 5-10% addition rates.

Hexis S.A.,
Frontigna 34110 Frontigna  France
Oct 28, 2009 Part of HX30000 Series, Carbon Cast multi-layered 135 µm cast vinyl film features carbon fiber embossed pattern. Product carries solvent-based adhesive and structured PE liner with Hex'Press technology that allows air egress during application. Available in 54 in. wide rolls, conformable film is suited for full vehicle wraps, furniture, laptops, cell phones, and long-term outdoor applications.

MH&W International Corporation
Mahwah, NJ 07430
Oct 28, 2009 Available in 8.3 x 11.7 in. sheets or die-cut parts, TP-S3LS pads contain less than 50 ppm of silicone while providing 3.0 W/mK of thermal conductivity between hot components and their heat sinks. Standard sheet thicknesses range from 0.020-0.196 in., and compliance allows for compression and filling of air gaps between irregular mating surfaces. Used in temperatures up to 200°C, product has UL 94 flame class rating of V-0 and 55 Shore 00 hardness.

General Ruby & Sapphire Co., Div. of EWM General Corp.
New Port Richey, FL 34653
Oct 28, 2009 Suited for optics, electronics and optoelectronics, fine mechanics, and laser technologies, Ruby and Sapphire Parts offer transmission range from microwave, vacuum UV, and visible through IR. Refractive index has low dependence on temperature, making sapphire suitable for imaging optics applications. Hard and scratch resistant, Sapphire does not melt until 2,040°C, is insoluble in most industrial solutions, and is resistant to corrosion from acids.