Manncorp
Willow Grove, PA 19090
Jul 23, 2009 Offered as compact (9.5 ft long) dual-pot system, Model 28.400-2 is mounted on transport and storage carts that allow conversion from Pb-free to tin-lead. It features dual-wave, 3 independently controlled zones with forced-air convection heating, and bottom-side IR preheating. Other features include internal automatic spray fluxing, titanium finger conveyor with motorized width adjustment for PCBs from 2-15.75 in., and closed-loop control of conveyor speed.

ACE Production Technologies, Inc.
Spokane Valley, WA 99216
Mar 24, 2009 Featuring analog controls, bench-top KISS 101A is programmable in X, Y, and Z axes and utilizes ACE Laser Point teach and align process. System accommodates PCBs from 2 x 2 in. up to 12 x 12 in. as well as connectors up to 10 in. long. Variety of standard and custom nozzles is available, from 3 mm bullet nozzle to 3 in. wide wave. Offered with optional lead-free compatible solder pot, KISS 101A is suited for assembly, prototyping, rework, and post-reflow offline assembly.

Manncorp
Willow Grove, PA 19090
Feb 27, 2009 Measuring 98.4 x 43.4 x 63 in. and supplied with 220 lb titanium solder pot, ECO-300 lead-free wave solder machine features heavy-duty, transducer-controlled pump motor that promotes precision solder wave uniformity and height control. Other features include automatically recirculating adjustable titanium finger conveyor for board widths to 11.8 in., and 32 in. preheat zone with stainless steel sheath-type IR heaters. Total power consumption is rated at 15 kW.

Manncorp
Willow Grove, PA 19090
Sep 23, 2008 Measuring 50 x 30 in., lead-free Model C250 is equipped with adjustable corrosion-resistant finger conveyor, automatic defluxing, IR preheating, air-knife cooling, and low-volume solder pot. Machine is available in either single or dual wave configurations for through-hole and surface mount assemblies. It also includes built-in solder pot loading, maintenance platform with locking support mechanism, and dial-adjustable wave height control.

ACE Production Technologies
Spokane Valley, WA 99216
Mar 28, 2008 Suitable for tight pitch components in high-volume automated production environments, Wave Height Monitor and control module maintain solder wave heights to within ±0.005 in. when intalleed on KISS line of selective soldering equipment. System works with wave nozzle sizes under 6 mm down to 1.5 mm. Combination of height monitoring circuit with nitrogen inerted solder delivery system and nitrogen air-knife incorporates resistive measurements of wave height relative to known reference.

Manncorp
Willow Grove, PA 19090
Feb 11, 2008 Accommodating low- to mid-volume PCB assemblers, MT-300 is available for high-density through-hole soldering as well as SMT and mixed technology applications. Dual-wave design is complimented by transducer-controlled twin pump motors that ensure precise and uniform wave heights. Also included, adjustable titanium finger conveyor can transport boards from 1.2-11.8 in. wide. Solder pot, wave nozzles, and pumping system are all of corrosion-resistant titanium alloy.

Manncorp
Willow Grove, PA 19090
Dec 20, 2007 Offering adjustable temperature range to 399°C, multi-purpose, mini wave System 120 is designed for single-point or single-edge soldering and removal of ICs, including DIPs, QFPs, PGAs, connectors, and odd forms. When wave is activated, Z-motion immersion takes place with nozzle encapsulating component and dwell time governed by foot switch. Bench-top unit is suited for lead-free or tin/lead processing, and short runs requiring selective soldering.

Manncorp
Willow Grove, PA 19090
Jun 26, 2007 Pb-free MT-300 is available for low- to mid-volume PCB assemblers seeking defect-free soldering of high-density boards populated with through-hole, SMT, or mixed technology components. This 8 ft long system utilizes dual transducer-controlled motors for uniform wave heights and includes adjustable titanium finger conveyor with max board width of 11.75 in. Automatic finger cleaner is standard, as are titanium-alloy solder pot, wave nozzles, and heavy-duty pumping system.

Vitronics Corp.
Stratham, NH 03885
May 07, 2007 Delta flexible wave soldering platform features EasyUse OI for programming, setup, and process changes, preheating and fluxing, and atmosphere control that makes platform fully lead-free capable. Automatic removal of dross, chipwave nozzle open access, and separate dross compartment help optimize preventive maintenance procedures. Featuring wave height measurement, platform is available in Delta models 5 and 7.

Speedline Technologies Inc.
Franklin, MA 02038
Oct 03, 2006 Designed for VectraElite(TM) Wave Soldering Systems, ServoSpray(TM) servo-controlled, reciprocating spray fluxing system features air atomized spray head, pressure tank flux supply system, self-cleaning nozzle capability, and ability to spray in one or both directions. With separate flux and air valve to control atomizing nozzle, fan-like spray pattern is delivered parallel to PCB holes and pallet openings to maximize hole penetration and transfer efficiency.

Speedline Technologies Inc.
Franklin, MA 02038
Dec 08, 2005 With max temperature of 662°F, lead (Pb)-free OmniFlex(TM) 10 Reflow Oven features variable-speed, closed-loop blower control; power limiting, balanced gas flow; and dual-chamber heating design. Process width is 20 in., heated length is 148 in., and and cooling length is 50.5 in. Lead (Pb)-free Electrovert VectraElite(TM), combined with UltraFill nozzles and upper High Velocity Convection pre-heat module, incorporates ServoJet spray fluxer and roll-out solder pot design.

Speedline Technologies Inc.
Franklin, MA 02038
Mar 10, 2005 Vectraâ„¢ and Electra® wave soldering systems are available with UltraFillâ„¢ Lead-Free Nozzles, which are 40% wider than traditional tin/lead nozzles to increase contact length and dwell time. They are also placed close together so that less heat is needed to reflow solder joints in second wave. Optional nitrogen shroud allows for either air or nitrogen operation, as determined by desired recipe, without need to change nozzles.

PBI-Dansensor America Inc.
Glen Rock, NJ 07452
Nov 17, 2004 MAP Check 9000 PFC Re-Flow and Wave Soldering System offers single control point for maintaining max quality of end product with minimal scrapping, rework, and gas consumption. It merges PBI-Dansensor MAP Check and MAP Con products into one instrument, and includes on-line process gas analyzer. All system parameters are monitored via self-diagnostics function that includes sensor flow detection with user-defined gas concentration alarms.