Rehm Thermal Systems
Blauberen   Germany
Apr 01, 2009 Equipped with 2 conveyor lanes that can be operated asynchronously at different speeds, Dual Lane Vision X Series enables simultaneous lead-rich and lead-free reflow soldering. Conveyors can be loaded with diverse PCBs printed with different solder pastes. Available with air or nitrogen atmosphere, convection soldering system includes integrated residue management system and ovens with homogenous, non-separated heating and cooling zones across width of conveyor.

ACE Production Technologies, Inc.
Spokane Valley, WA 99216
Mar 24, 2009 Featuring analog controls, bench-top KISS 101A is programmable in X, Y, and Z axes and utilizes ACE Laser Point teach and align process. System accommodates PCBs from 2 x 2 in. up to 12 x 12 in. as well as connectors up to 10 in. long. Variety of standard and custom nozzles is available, from 3 mm bullet nozzle to 3 in. wide wave. Offered with optional lead-free compatible solder pot, KISS 101A is suited for assembly, prototyping, rework, and post-reflow offline assembly.

Honeywell
Golden Valley, MN 55422 3935
Mar 18, 2009 To improve operational reliability, Honeywell Pb-free Die Attach Solder helps manage heat produced by semiconductor chips by filling gap between chips and heat spreader. This lead (Pb)-free thermal interface material, intended to be used mainly in wire form, is designed to offer environmentally friendly alternative with combination of melting temperature, wetting behavior, and mechanical properties of lead-based solders.

Manncorp
Willow Grove, PA 19090
Feb 27, 2009 Measuring 98.4 x 43.4 x 63 in. and supplied with 220 lb titanium solder pot, ECO-300 lead-free wave solder machine features heavy-duty, transducer-controlled pump motor that promotes precision solder wave uniformity and height control. Other features include automatically recirculating adjustable titanium finger conveyor for board widths to 11.8 in., and 32 in. preheat zone with stainless steel sheath-type IR heaters. Total power consumption is rated at 15 kW.

Coherent Inc., Laser Group
Santa Clara, CA 95054-1112
Feb 16, 2009 Configured with 1-4, 100 W, 200 µm diode modules, HB-Diode laser system either fiber-delivers output from each module individually, or combines output into single, 0.22 NA delivery fiber. It provides 100, 200, 300, or 400 W of output power, at fiber diameters of 200, 400, 600, or 800 µm respectively. Featuring 19 in. rack mount form factor, armored fiber, air-cooling, aiming beam, and selection of fiber imaging optics, system can be integrated into variety of applications.

Lincoln Electric Co. Inc., The
Cleveland, OH 44117
Feb 13, 2009 AWS A5.29 Class T1 Schedule I compliant, self-shielded and flux-cored wire Pipeliner® NR®-208P can carry and deposit weld metal vertical down pipe and out-of-position welding applications. Tested to exceed -20°C, wires can handle up to X80 grade pipe and are suited for hot, fill and cap-pass welding procedures.

Manncorp
Willow Grove, PA 19090
Feb 05, 2009 Employing thermode technology, semi-automatic Hot Bar Soldering Systems generate rapid reflow by pulse heating. System PBS212 offers in/out shuttle that moves processing linearly, while system PBS213 utilizes in/out 180º rotating table. Both perform bonding process automatically and also exit without operator intervention. All elements of soldering profile are programmable, including pressure, temperature, heat-up, and cool-down times.

Cooper Hand Tools
Apex, NC 27582
Dec 19, 2008 Weller® WD1000HPT includes WP120 soldering iron with compact heating element with replaceable soldering tip, and microprocessor-controlled WD1M power unit with built-in functions for use in production, rework, and laboratory environments. Iron set-backs for time and temperature can be programmed and are activated when soldering iron is placed into WDH10T safety rest. When iron is removed from rest, tip temperature is restored immediately to set working level.

Hobart Brothers Co.
Troy, OH 45373-2900
Dec 02, 2008 Classified under AWS A5.29, class E81T8-Ni2 J, self-shielded Hobart® Fabshield X80 provides tensile strength of 94,000 psi, yield strength of 84,000 psi, and CVN impact values from 107 lb/ft at -20°F to 96 lb/ft at -40°F. Wire is available in 5/64 in. diameter and features fast-freezing slag that is nearly self-peeling, making it suited for welding in all positions. Product can be used for single- or multi-pass welding on fillet, lap, or deep groove butt welds.

BernzOmatic
Medina, NY 14103
Nov 11, 2008 Maneuverable in hard-to-reach places, Trigger Start Hose Torch features stainless steel burn tube and solid brass regulator that burns in any direction. Instant on/off trigger igniter enables one-handed operation, while adjustable flame control knob allows user to size flame for specific applications, and lock button keeps torch lit for finger-free use. Fuel cylinder holster attaches with belt clip and has carrying handle for added portability.

Indium Corporation of America
Utica, NY 13502
Nov 05, 2008 Colophony/rosin free, no-clean, cored wire solder, CW-501 comes in variety of alloys and wire diameters. Compatible with wave fluxes and Indium8.9, it provides wetting and solder spread with minimal smoking and low odor.

OK International
Garden Grove, CA 92841
Nov 03, 2008 Coupling SmartHeat® Technology with 80 W of power, Metcal MX-5000 Series provides instantaneous response to load conditions, ensuring system will not overshoot while recovering in seconds. Microprocessor-controlled systems also incorporate built-in digital power indication display, providing users with continuous feedback. Available with choice of 4 different hand-pieces, systems offer Metcal TipSaver(TM) Workstand with Auto-Sleep to minimize power use and extend tip life.

Vitronics Corp.
Stratham, NH 03885
Oct 30, 2008 With wave height measurement system, mySelective 6748 ensures specific predetermined wave height for every PCB by automatically adjusting solder pump rpm. Closed-loop system uses laser-based sensor to detect, measure, and monitor SelectWave height. It prevents loss of cycle time and stores individual PCB settings in system's Management Info Database for later recall. With mySelective 6748, each joint can be soldered under optimum process parameters.

OK International
Garden Grove, CA 92841
Oct 29, 2008 Used for thermally demanding applications, MFR-1100 Series Single Output Soldering and Rework System is powered by SmartHeat® Technology. MFR-H1-SC Cartridge Hand-piece offers soldering and rework cartridges that provide fine access, SMD rework, and pad clean-up, while tip-equipped MFR-H2-ST delivers soldering performance required by lead-free and production soldering environments. Also available, MFR-H4-TW Precision Tweezer Hand-piece is capable of removing small discrete components.

Unitek Miyachi Corporation
Monrovia, CA 91017 7133
Oct 24, 2008 Unitek Eapro DT-500-PH Desktop Hot Bar Bonding System is suited for applications which require hot bar bonding multiple parts in array at one time, bonding multiple flexes onto one PCB, or bonding one flex to both PCB and LCD. System includes Uniflow2 power supply for selective hot bar soldering, heat sealing, and conductive adhesive bonding applications. Utilizing pulsed heat technology, it provides targeted heating/precision temperature control for flex circuits, ribbon cables, and wires.

Hobart Brothers Co.
Troy, OH 45373-2900
Oct 23, 2008 Able to be used in all welding positions, self-shielded Fabshield® 23 suits general-purpose welding fabrication and repairs on thin gauge mild or galvanized steel and coated materials. It requires no shielding gas, enabling use outdoors or in drafty conditions, and produces minimal spatter to help minimize post-weld cleanup. Suitable for single-pass welding applications, wire is offered in .030, .035, .045, 1/16, and 3/32 in. dia in multiple packaging weights.

Select-Arc, Inc.
Fort Loramie, OH 45845-0259
Oct 09, 2008 Models Select 410 and Select 410NiMo flux cored, martensitic stainless steel electrodes are available in 0.045-3/32 in. dia. Suited for welding straight 410 stainless steel, Select 410 contains 12% chromium and features oxidation resistance up to 1,200°F. Composed of 12% chromium, 4.5% nickel, and 0.65% molybdenum with maximum carbon content of 0.06%, Select 410NiMo is used to weld ASTM CA6NM castings and certain 410 alloys for blades and vanes in power generation equipment.

Master Appliance Corp.
Racine, WI 53403
Sep 26, 2008 Supplied in storage/carrying case, UT-100-TC Ultratorch® Professional Heat Tool Kit comes with everything needed to pinpoint heat, solder/desolder, remove SMT components, heat shrink, repair vinyl, spot dry, cut, or torch materials. It is based on portable, butane-powered UT-100 Ultratorch, which functions as soldering iron, flameless heat tool, hot knife, and brazing torch. Kit also contains soldering, hot knife, torch, and hot air tips; wire cutter; and needle nose pliers.

Manncorp
Willow Grove, PA 19090
Sep 23, 2008 Measuring 50 x 30 in., lead-free Model C250 is equipped with adjustable corrosion-resistant finger conveyor, automatic defluxing, IR preheating, air-knife cooling, and low-volume solder pot. Machine is available in either single or dual wave configurations for through-hole and surface mount assemblies. It also includes built-in solder pot loading, maintenance platform with locking support mechanism, and dial-adjustable wave height control.

ACE Production Technologies
Spokane Valley, WA 99216
Aug 28, 2008 Capable of handling demanding applications, Selective Soldering Equipment features 0.0001 in. resolution linear encoder technology that provides closed-loop feed-back, indicating exact location of solder nozzle and ensuring repeatable accuracy of ±0.001 in. Machine can repeatedly position the center of solder nozzle at given location for precision soldering results regardless of motor positions, even when soldering tiny components.