Bayer MaterialScience LLC - Polyurethanes
Pittsburgh, PA 15205
Jul 15, 2009 Bayhydrol AH XP 2741 high-molecular-weight, polyacrylate dispersion is solvent-free and is suited for formulation of low- to no-VOC, 1-component coatings for indoor wood floors and furniture. Clearcoats formulated with styrene-acrylate copolymer resin accentuate wood grain and provide chemical resistance. Resin can be used to formulate primers, high-gloss or semi-gloss coatings, and in combination with polyurethane dispersions and UV-cured coatings.

Americhem, Inc.
Cuyahoga Falls, OH 44222
Jul 09, 2009 Completely customizable, nDuramax(TM) family includes UV stabilizer solution for PET fibers used in outdoor PET applications, such as awnings, boat covers, and geosynthetics, which are constantly exposed to elements and require fibers with optimal weathering performance. Line also includes product for packaging industry, offering extended shelf life and preservation of product contents. Stabilizers additionally protect against color fade and maintain bottle clarity.

Aremco Products, Inc.
Valley Cottage, NY 10989
Jul 08, 2009 Supplied in powder form and mixed with water, Ceramacast(TM) 575N fine-grain, alumina-filled, ceramic compound is suited for potting high-temperature electrical components including lamps, heaters, rheostats, and temperature sensors. Product offers temperature resistance to 3,000°F, dielectric strength of 150 V/mil, compressive strength of 11,800 psi, and moisture and chemical resistance. Compound hydraulically sets in 16 hr at room temperature and cures fully at 250°F in 1-2 hr.

Emco Industrial Plastics, Inc.
Cedar Grove, NJ 07009
Jul 07, 2009 With Microban antimicrobial protection built in during manufacturing process, Lucite L Cast Acrylic Sheet inhibits growth of microbes such as bacteria, mold, and mildew that can cause stains, odors, and deterioration of product. Available in full sheets, cut to size pieces, or fabricated parts, Lucite L comes in thicknesses from 1/8-¼ in. It is suited for medical and foodservice industries where bacteria causes health concern.

Trelleborg Sealing Solutions
Fort Wayne, IN 46801
Jul 07, 2009 Developed for oil and gas applications, XploR(TM) range of explosive decompression resistant materials includes compounds in HNBR, FKM, and Isolast® Perfluoroelastomer (FFKM), each of which demonstrates explosive decompression resistance. Materials in XploR(TM) range satisfy NORSOK M-710 sour service and Rapid Gas Decompression test conditions. They are available in standard international o-ring sizes and cross sections, along with custom-engineered solutions and seal designed profiles.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Jul 01, 2009 Comprised of 7 products, Loctite® Light Cure Silicones offer cure depths up to 2 in. and cure fully in seconds when exposed to high-powered UV or visible light. Solvent-free adhesives/sealants deliver elastic seal with optimized degradation resistance. Able to bond with silicone, plastic, and metal substrates, they exhibit weather, temperature, and moisture resistance. Uses include general bonding and sealing as well as replacing molded or die-cut gaskets and coating applications.

Henkel
Rocky Hill, CT 06067
Jun 25, 2009 Producing 15 releases per application, VOC and organic solvent free Frekote® Rel-Eaze(TM) can be applied at room temperature and cures at ambient temperatures within 30 sec. Low viscosity liquid can be sprayed on as thin coating using high-volume, low-pressure spray systems or wiped on with cotton cloth. When touch up is required, molding can continue immediately after touchup coat is applied. Product is available in 1 gal cans, 5 gal containers, and 55 gal drums.

Americhem, Inc.
Cuyahoga Falls, OH 44222
Jun 23, 2009 Acting as cooling agent, xCelmax(TM) increases crystallization temperature of polymers, and minimizes potential for defects and end product warping without typical process changes. Product is available in multiple pellet and bead sizes and can be incorporated into color and additive masterbatches without additional equipment. It is also suitable for use with polyolefin masterbatches that produce PP bins, HDPE bottles, PP closures, and PP thermoformed containers.

SolarBee, Inc.
Dickinson, ND 58601
Jun 23, 2009 SolarBee® Chlorine Boost System boosts water quality in water storage tanks, helping achieve compliance with EPA Stage 2 disinfection byproduct rules. Designed for use with SolarBee water mixing equipment, portable system boosts chlorinated/chloraminated water tanks with sodium hypochlorite. It includes 20 gal sodium hypochlorite holding tank, 5 gal rinse tank, and 3/8 in. teflon chemical hose as well as double-diaphragm pump to inject compound into tank and flush injection hose.

Advanced Anti-Vibration Components - AAC
New Hyde Park, NY 11040
Jun 19, 2009 Supplied in syringe to facilitate application, V30Z63MDP Series features specific volume resistance ratio up to 7.2 x 1014 Wocm, dissipation factor down to 0.0004 at 1 MHz, and breakdown voltage up to 9.6 kV/mm. RoHS-controlled substance is used to fill gaps around heat sources such as semiconductors. Other applications involve surface, underside, and lead heat sources such as ICs, as well as computer internal components, power supplies, and power transistors.

Bayer MaterialScience, LLC - Coatings, Adhesives & Sealants
Pittsburgh, PA 15205
Jun 18, 2009 Suited for use in medical devices, hydrophilic coatings are intended to combine lubricity and hemocompatibility with mechanical properties of polyurethane. Formulation exhibits minimal swelling and is optimized for strength/durability. Aqueous polyurethane dispersions are of solvent-free nature with low viscosity, while solvent-borne polyurethane solutions are characterized by stability and wet strength.

Meadows, W.R., Inc.
Hampshire, IL 60140 0338
Jun 15, 2009 Supplied as colorless liquid, LIQUI-HARD ULTRA penetrates into concrete surface, where chemical reaction takes place that produces byproduct that fills in pores of concrete at molecular level. Finished surface offers abrasion and chemical resistance and is more durable than that of untreated concrete. LIQUI-HARD ULTRA is environmentally safe, water-based product and features zero VOC content.

Dontech, Inc.
Doylestown, PA 18901
Jun 11, 2009 IMO-bond(TM), optical coupling of contrast enhancing cover glass to front polarizer of display, eliminates reflections from rear surface of optical filter and front surface of display system. Process of applying rigid optical filters to electronic displays via refractive index matched optical (IMO) bonding process includes index-matched adhesives that optically couple cover glass or touch screens to display to eliminate reflection and enhances sunlight readability by greater than 90%.

Epoxies Etc.
Cranston, RI 02921-3407
Jun 10, 2009 Formulated for electronic potting and encapsulating applications, Type 20-3060 Epoxy flows quickly in and around electronic components, self levels, releases air bubbles, and provides smooth, glasslike finish. It offers electrical insulation, chemical resistance, and protection from environment. Potting compound is available in quarts, gallons, and 5 gal pails.

NuSil Technology
Carpinteria, CA 93013
Jun 10, 2009 Available with refractive index of 1.54 and viscosities from 3,500-8,000 cP, LS-3354, LS2-3354, and LS3-3354 are designed for potting, encapsulating, backfilling, and dampening applications requiring soft gel with optical clarity. Cure can be achieved at ambient temperatures with humidity or accelerated with heat, and gels can be removed for rework if needed. Available in 1:1 mix ratio, products are suited for protecting electronic components from dust, debris, and moisture.

Americhem, Inc.
Cuyahoga Falls, OH 44222
Jun 08, 2009 For optimized physical properties and cycle times, nCore(TM) chemical blowing agents exhibit characteristics such as heat and sound insulation, sink mark prevention, and nail and screw acceptance without specialized installation equipment. Products suit injection molding, extrusion, and calendaring operations and can be formulated to fit resin, compound, and/or manufacturing processes. Options for exothermic, endothermic, or blended products are available.

Ampacet Corp.
Tarrytown, NY 10591-5130
Jun 03, 2009 Suited for appliance and electronics manufacturing operations, FormulaX LiquidMetals Color(TM) Masterbatch achieves look of chrome and aluminum without use of secondary treatments. Colorant is added into extruder or injection molder along with base resin, and can be used with polypropylene, polystyrene, polycarbonate, ABS, PET, and Nylon. Unlike finished metal parts, which may dent and scratch, molded plastic bodies and housings incorporate metal look-alike effect throughout part.

Heritage Plastics, Inc.
Picayune, MS 39466
Jun 01, 2009 Pelletized mineral-containing BioTuf 976 film compound is based on blend of biodegradable resins, including aliphatic/aromatic co-polyester. Designed to be extruded and converted on standard low density PE or grooved-feed HMW-HDPE processing equipment, compound produces films with physical properties similar to linear-low density polyethylene.

RTP Co.
Winona, MN 55987
May 28, 2009 Available in PA, PC, POM, PBT, and PC/ABS resins, All-Polymeric Wear Additive Compounds are non-halogenated, RoHS-compliant, and free of particulate or fluid additives. Products offer plastic-on-plastic wear resistance without sacrificing properties inherent to host resin. Providing optimal flow during molding, blemish-free surface appearance, and complete colorability, olefin-based APWA technology is suited for gears, bushings, rollers, impellers, and moving/sliding parts.

Neutrex
Houston, TX 77065
May 13, 2009 Supplied in pellets without fines, Purgex 461 Plus blends low-linear polyethylene carrier and FDA-approved active ingredients that are non-toxic, non-abrasive, and safe for cleaning blown film and sheet lines in frequently purged extruders. It is recommended for color and/or material changes and removal of residual contamination; cleaning extruder, screen pack housing, and die/manifold; removing all types of color bodies, carbonized material, and degraded resins; and shut-downs.