Crystex Composites
Clifton, NJ 07011
Jun 14, 2006 Acting as ceramic thermal insulator, M/M 1600 Glass Mica Composite features fine grain construction and enables components to be machined from compression molded sheets using conventional cutting tools. Material exhibits 1.02 W/m°C thermal conductivity, ~300 sec tracking and arc resistance, and 500 V/mil dielectric strength. It comes in 8 in. dia discs ranging from 1/16 to 1 1/8 in. thick and 17 x 17 in. sheets in thicknesses to 1¼ in.

ChemMasters, Inc.
Madison, OH 44057
Jun 06, 2006 VOC-compliant in areas affected by Ozone Transport Commission (OTC) regulations, solvent-based A team products cannot freeze, will not settle out, and are not susceptible to bacteria growth. Products included in series are styrenated acrylic sealer; non-yellowing acrylic cure and seal; and high-gloss, non-yellowing sealer. Also included, Silencure-A offers long-term silane protection, while Crystal Clear-A delivers long-term gloss and protection.

Laird Technologies - EMI
St. Louis, MO 63045
Jun 01, 2006 Offering high temperature and voltage properties, thermally conductive and electrically insulating T-preg(TM) HTD is used to isolate copper circuit layers from aluminum or copper base plate when making metal-based PCBs. RoHS-compliant product has UL relative temperature index rating of 150°C. HTD boards and substrates are compatible with Sn-Pb and Pb-free solders as well as surface mount and chip and wire assembly processes.

Norplex Micarta
Postville, IA 52162
May 05, 2006 Used to separate and isolate electrical contacts, oil-resistant NP613 maintains mechanical strength when used in oil-filled transformer equipment. It also maintains dimensional stability at elevated operating temperatures, guaranteeing contact will be separated and engaged as needed. Constructed from electrical grade of kraft paper and modified resin, NP613 has flexural strength of 27,000 psi, compressive strength of 40,000 psi, and max operating temperature of 140°C.

Saint-Gobain Performance Plastics, Corporate Headquarters
Wayne, NJ 07470
Nov 25, 2005 Meldin® 7001 polyimide parts and shapes offer heat resistance up to 600°F and exhibit geometric stability. In TV screen lines, material handles and touches hot glass while preventing defects and limiting downtime. Available in stock shapes for machining or custom molded components, material is suited for glass handling applications.

Aremco Products, Inc.
Valley Cottage, NY 10989
Nov 16, 2005 Fused silica-based Ceramacast(TM) 645N is suited for encapsulating small ceramic and metal housings used in high temperature devices such as flow meters, pressure sensors, and temperature sensors to 3,000°F. Product offers dielectric strength of 300 V/mil, compressive strength of 7,000 psi, and chemical resistance. Supplied in powder form, compound is mixed with water and sets at room temperature in less than 8 hr. It contains no asbestos or VOCs.

Revere Products
Cleveland, OH 44135 0311
Jun 06, 2005 Epoxi Gel Patch is a 100% solids epoxy gel for patching cracks, divots, and other minor deformities in concrete floors. Components come in factory-portioned units to eliminate mixing errors. Smooth consistency enables product to be applied with spatula, spackle knife, or flat trowel. Epoxi Gel Patch is suited for use in facilities that limit use of solvents and fine, loose silica.

Norplex Micarta
Postville, IA 52162
May 10, 2005 Suited for indoor or outdoor use by skateboarders, roller skaters, and stunt bikers, SkatePlate 3000 composite material has non-splintering surface resistant to wear, abrasion, and moisture. Product, made by fusing weather-resistant resin system into natural fiber reinforced core under heat and pressure, is bondable to frames and subsurfaces with adhesives, nails, or screws. Surface provides solid grip for skaters, but permits controlled slips as needed.

Garon Products, Inc.
Wall, NJ 07719 1924
Mar 23, 2004 Tigerthane 220â„¢ fills expansion joints and permits sections of concrete floor to expand and contract in response to temperature changes in surface. Material, which consists of 100% solids, 2-part, polyurea elastomer, will not become brittle or break out with movement. Joint sealant sets in applications with temperatures from freezing to 130°F and is traffic-ready within 60 min.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Dec 02, 2003 Isostrate® J-Series dielectric thermal interface materials provide low thermal impedance of .48°C-in²/W, high cut-through resistance, and dielectric ratings of 4000 V/mil. Volumetric expansion at 60°C phase change temperature aids wetting action and eliminates voids and gaps due to mounting surface irregularities. Thixotropic properties prevent problems associated with migration and eliminate process issues associated with grease.

Buckhorn, Inc.
Milford, OH 45150 9778
Oct 09, 2003 EverKoteâ„¢ consists of 4 in. x 4 in. x 8 ft posts of structural foam plastic bonded directly to wood core. They can be cut, drilled, and assembled like wood but have dimensional stability of plastic. Posts feature smooth surface and rounded edges that will not splinter, making them suited for child-oriented products and outdoor building material. Molded in fade-resistant colors, EverKote can be ordered pre-cut and pre-drilled with molded-in bosses and sealants.

Sherwin-Williams Co.
Cleveland, OH 44115
Jul 22, 2003 ARMORSEAL® ExpressPatch fast-dry, low-odor, water-based system requires only one coat. It protects concrete from thermal shock, impact, corrosion, chemical attack, and abrasion while providing return to service in 4 hr. ARMORSEAL offers no outgassing at high film thickness. It may be applied directly to damp concrete using flat trowel at minimum thickness of 3/16 to 1/4 in. Kit is suitable for patching concrete, epoxy mortar systems, and urethane cement flooring systems.

Revere Products
Cleveland, OH 44135 0311
Mar 20, 2003 QWIK-PATCH hardens for light use in 15 min and is ready for heavy traffic in 45 min, even in damp, humid, or freezing conditions. With twice the compressive strength of normal concrete, product may be used to patch any indoor or outdoor contained surface. Needing no primer or binders, product comes in 45 lb units that will patch 36 ft², 1/8 in. thick. Trowel and mixing pail are included. Applications include refrigerated rooms, loading docks, drives, and ramps.

Armitage Industries Inc., Thermal-Chem Div.
Franklin Park, IL 60131
Nov 22, 2002 FlashPatchâ„¢ system allows heavy forklift traffic to resume within 15 minutes after application of product. Low-order product meets USDA requirements and works at substrate temperatures as low as as 20°F; cure time may take up to 45 minutes at temperatures below freezing. Application consists of pouring special silica sand, wetting it with FlashPatch liquid, and immediately striking it level. Product suits spalled surfaces, patching, non-moving cracks, and more.

Rogers Corp., Circuit Materials Div.
Chandler, AZ 85224
Oct 08, 2002 BISCO® EC-2000 Series Conductive Silicones are nickel-graphite filled materials offering compression-set, flame and corrosion resistance. They come in wide continuous roll goods in thicknesses from 0.020 to 0.125 in., making them suitable for replacing fabric-over-foam in intricately shaped applications. EC-2000 products fall in 30-40 Shore A durometer range and are suitable for base stations, cell phones, computers, antennas, and electronic devices.

Garon Products, Inc.
Wall, NJ 07719 1924
Aug 29, 2002 Traffic Fast™ mix and pour, shallow crack, concrete repair material contains high-bond liquid polymer that provides impact resistance. Fast setting, self-leveling product eliminates need for extensive key cutting. Traffic Fast™ is suitable for use on loading docks, shipping/receiving platforms, bridge decks, warehouse and plant traffic lanes— any area that cannot be shut down for extended time.

Garon Products, Inc.
Wall, NJ 07719 1924
Jun 25, 2002 Arctic Freeziteâ„¢ 100% solids mortar provides repairs indoors or out in temperatures as low as –10°F. It won't crack, shrink, or lose its bond when applied in severely cold temperatures. Mortar fills potholes in concrete and allows for traffic flow within 2 hr of repair. It is flexible and impact resistant, and provides strong, chemical resistant surface. Applications include cold storage and freezer areas or general outdoor patching during winter.

Gore, W. L., & Associates, Inc.
Newark, DE 19711
May 23, 2002 MICROLAM® 610 dielectric minimizes dielectric cracking and provides PCB mechanical reliability. Reinforced microvia material consists of FR-4 epoxy resin and continuous toughening matrix. MICROLAM® 620 dielectric suits chip package substrates. It consists of thermoset resin in reinforcing matrix with moisture resistance and mechanical reliability. MICROLAM® 630 dielectric consists of BT resin in continuous toughening matrix and provides surface planarization.

Ryzel Corporation
Bristolville, OH 44402
May 16, 2002 RZ-1100 contains epoxy resins and binders and shatterproof silica aggregate that may be applied in small quantities to repair cracked, spalled, or rough concrete floors. When applied at 1/8 in. thickness, patch will be stronger than existing concrete surface. Dust free material resists live steam, changes in temperature, abrasion, and harsh cleaning chemicals, and can be applied by in-plant maintenance people. It is supplied in 5 gal cans that cover ~50 sq ft.

Garon Products, Inc.
Wall, NJ 07719 1924
Mar 08, 2002 Traffic Fast(TM) mix and pour, shallow crack concrete repair sets up in 2 hours. High-bond liquid polymer stands up to industrial use. Self-leveling Traffic Fast eliminates need for extensive key cutting. Suitable for use on loading docks, shipping/receiving platforms, bridge decks, warehouse, and plant traffic lanes, Traffic Fast binds instantly without priming.