Dow Corning Corp.
Midland, MI 48686 0994
Aug 05, 2008 Composed of silicone copolymer to eliminate VOCs from its composition, OP-8800 Premium Hydrophilic Softener offers softness, water absorbency, and wicking with minimum to no impact on original substrate whiteness and stain-release properties of fluorocarbon-treated textiles. High-shear and high-pH stable product is compatible with anionic treatments.

Acrilex, Inc.
Jersey City, NJ 07305 1122
Aug 01, 2008 Designed to reproduce look of upscale, patterned, tempered glass, Acriglas® Clear Impressions series has crystal clarity and can be made with textures on one or both sides of sheet. Textures included are Brushed, Woven Silk, Mesozoic, Precambrian, Box Mini-Flute, Waffle Iron, Techno, and Morning Dew. Offered in standard size of 4 x 6 ft and in thickness ranging from 1/8 to ½ in., sheets can be thermoformed to create custom light fixtures or configured to meet any specification.

Emerson Process Management
Austin, TX 78754
Aug 01, 2008 Environmentally friendly Dosaodor-D computerized pressure injection system utilizes solenoid injector algorithm to ensure uniform odorant atomization into natural gas in transmission and distribution pipelines. Pressure injection system, with frequent small injections of odorant and wick distribution insert, is accurate over large range of pressures and flow rates. ROC800 series controller enables configuration and operation of system for measurement of data in real time.

Walton Plastics, Inc.
Walton Hills, OH 44146
Jul 31, 2008 Exhibiting chemical resistance and temperature flexibility, Flexible Polyurethanes (TPUs) are available in polyether-, polyester-, and aliphatic-based versions to match specific film and sheet requirements. Specialty grade polyurethanes are also available, including halogenated and non-halogenated fire retardant, static dissipative, as well as versions certified to NSF, FDA, and European standards. Material ranges from 70 Shore A to 60 Shore D and .030-.250 in. thick.

Air Products & Chemicals, Inc.
Allentown, PA 18195
Jul 29, 2008 XeCovery^SM On-site Xenon Recovery System is service that allows semiconductor manufacturers to recover and reuse xenon gas. Based on technology utilizing Vacuum Swing Adsorption, process is capable of extracting xenon from process effluent streams. Enriched mixture of recovered xenon, typically in percent levels, is compressed and stored. Full vessels are then transported off site for distillation.

CoorsTek
Golden, CO 80403
Jul 29, 2008 PlasmaPure(TM)-UC Alumina offers extreme purity (99.9%) critical for semiconductor, electronic, and optical industries. Able to extend component life and reduce contamination, ultra-high-purity ceramic material exhibits etch resistance in corrosive chemistries, minimal sodium content, and dielectric loss tangent under 0.00002. Fine-grained material also exhibits corrosion resistance and minimal sodium content.

Soitec, Inc.
Peabody, MA 01960
Jul 25, 2008 Fabricated using Smart Cut(TM) process, ultra-thin top silicon and ultra-thin Buried Oxide meet advanced requirements in terms of defectivity, flatness, and silicon-on insulator thickness control of up to ±10 Angstroms. Top silicon layer of wafers is available in thicknesses ranging from 20-110 nm, while BOX can be as thin as 10 nm. Substrates are suited for partially depleted and fully depleted devices, including multi-gate transistor architectures.

Misumi USA
Schaumburg, IL 60173
Jul 22, 2008 Suited for building of machinery and equipment, Urethane, Rubber, and Sponge Components come in round and metal plate-mounted versions as well as configurable block versions. Urethane and rubber bumpers feature round tips, and come in choice of solid or through-hole designs. With diameters, lengths, and through-hole sizes configurable in 1 mm increments, hundreds of sizes and shapes are available. Urethane blocks mounted on metal plates are offered in flat, V-shaped, and corrugated designs.

Schulman, A. Inc.
Akron, OH 44309
Jul 18, 2008 Invision PX modified polypropylene-capped TPO (thermoplastic olefin) sheet and Invision TX mono-layered TPO sheet offer high melt strength allowing for large process window, for processing flexibility. They also provide high stiffness which enables processors to down-gauge.

Spectronics Corp.
Westbury, NY 11590
Jul 15, 2008 Formulated specifically for large industrial systems, oil-based OIL-GLO(TM) 40 pinpoints leaks in all synthetic- or petroleum-based fluid systems, including light-colored hydraulic fluid, very dark or intensely blue hydraulic and lubrication fluids, compressor oil, engine oil, and gearbox oil. Product can remain safely in system for periodic re-checks, eliminating need to add more dye until oil is changed.

Simrit, A Div. Of Freudenberg-NOK
Plymouth, MI 48170
Jul 15, 2008 With service temperature of -6 to 300°C, Simriz® 508 exhibits plasma resistance and minimum particulation in range of plasma environments. White perfluoroelastomer material is designed for thermal stability and nearly universal protection against chemical attack. Suited for deposition, oxide, and metal plasma etching, ashing, metallization, and ion implant, product is appropriate for chamber lid seals, bell jar seals, endpoint windows, gas inlet seals, and isolator valve seals.

NOVOMER, INC.
Ithaca, NY 14850
Jul 15, 2008 Suited for electronics and ceramics manufacturing, NB-180 PPC degrades completely and uniformly into environmentally benign products, providing mechanical strength to ensure consistency, solidification, or adhesion. Amorphous, colorless thermoplastic polymer produces ash residues less than 5 ppm. Based on 3% binder use levels, residual ash levels in finished parts are less than 1 ppm. NB-180 can be produced in customized viscosities and molecular weights to meet specific requirements.

Sandmeyer Steel Co.
Philadelphia, PA 19116
Jul 11, 2008 Providing corrosion resistance in both oxidizing and reducing conditions, Type 825 (UNS N08825, W. Nr. 2.4858) is nickel-iron-chromium alloy with additions of molybdenum, copper, and titanium. It is available in plate thicknesses from 0.1875-2.00 in. thick. Alloy is suited for chemical, petrochemical, food processing, nuclear fuel reprocessing, waste handling, oil and gas production, petroleum refining, pollution control, and steel pickling industries.

Aremco Products, Inc.
Valley Cottage, NY 10989
Jul 09, 2008 Ceramabond(TM) 685N is single part, dispensable, zirconium silicate based adhesive and sealant system that is used to bond ceramic honeycombs to metal frames used in construction of gas-fired ceramic radiant heaters. Thixotropic, water-dispersible, and fast-setting paste contains no asbestos or VOCs, and exhibits tensile-shear strength of 500 psi and linear shrinkage of less than 2% after curing. It is available in pint, quart, gallon, and 5 gal pails.

Laird Technologies
Chesterfield, MO 63017
Jul 07, 2008 Optimized for Intel's Penryn mobile Quad-Core CPU, T-pcm(TM) 670 and T-pcm 680(TM) soften at regular chip operating temperatures to fill microscopic irregularities found in surfaces of microchip package and heat-sink. Mix of thermally conductive fillers and resins serves to minimize resin migration and pump-out. Both RoHS-compliant phase change thermal interface materials are inherently tacky and flexible to facilitate application and handling.

Dow Corning Corp.
Midland, MI 48686 0994
Jul 03, 2008 Enabling development of direct-write lithography processing technology, XR-1541 photoresists allow patterning with electron beams for maskless lithography technology. Products consist of hydrogen silsesquioxane resin in carrier solvent of methylisobutylketone and are available in various high-purity, semiconductor-grade formulations. Negative-tone resists can be used with standard spin-on deposition coating equipment to produce thin films from 30-180 nm thick in one coat.

Compaction America, Inc.
Kewanee, IL 61443 1714
Jul 02, 2008 Model MPH125 is powered by turbocharged, 590 hp, Tier 3-compliant Deutz V8 diesel engine, equipped with electronic injection system, that drives 91.7 in. wide rotor. Rotor speeds from 90-130 rpm can be selected under load, and rotor's mixing chamber automatically adjusts with cutting depth. Operator station rises for normal operation and lowers to reduce overall transport height to 122 in., while articulated frame plus rear-wheel steering result in inside turning radius of 148 in.

CRC Industries, Inc.
Warminster, PA 18974
Jul 01, 2008 T-Force(TM) Degreaser is nonconductive, noncorrosive, and nonstaining and has no flash or fire point. It contains no Class I or Class II ozone depleting chemicals and dissolves grease, oil, and sludge from air tools, mechanical brakes, clutches, chains, wire ropes, motors, dies, molds, parts, bearings, generators, and compressors. With dielectric strength of 33,300 V, it leaves no residue and is available in 20 oz aerosol can.

SABIC Innovative Plastics
Pittsfield, MA 01201
Jun 27, 2008 Xtreme LNP(TM) Starflam(TM) compounds withstand high temperatures encountered in lead-free soldering processes. Based on technology that forms chemical bonds between PA macromolecules under E-beam radiation, they are available in 2 grades featuring non-brominated, non-chlorinated flame retardants, suited for contactors, connectors, and circuit breakers. They are also available in 2 non fire-resistant grades for under hood automotive applications or parts in HVAC equipment.

Master Bond, Inc.
Hackensack, NJ 07601
Jun 25, 2008 With 2.2 Btu-in./hr/ft²/°F thermal conductivity, Master Sil 150 is 2-part, condensation cured liquid silicone system which can be used for potting and encapsulation. It features Shore A hardness of 40, 230% elongation at break, 11 x 10^-4 cm/cm°C thermal expansion, and less than 0.4% linear shrinkage. Able to protect sensitive electronic components/assemblies from dust, moisture, ozone, thermal shock, and vibration, product cures in contact with virtually all types of materials.