Chemineer, Inc., A Unit of Robbins & Myers, Inc.    Dayton, OH 45401
Jun 27, 2011 With design that facilitates seal maintenance, Model 20 HT/GT modular agitators eliminate need to lift or remove gearbox. Replacement of mechanical seal is done by rotating gearbox 90° around pivot pin. Seal pedestal top opens for clear, line-of-site view and provides ample room for removal of coupling half and seal assembly. Other components include gearbox optimized for efficiency with helical gearing and parallel shaft configuration. Available range of speeds promote process control.

Terronics Development Corporation    Elwood, IN 46036
Jun 10, 2011 Incorporating PLC-based control system and powder-processing technology, custom-designed seasonings applicator enables range of powders to be applied at precisely controlled weights uniformly on product. Deposition depends on powder properties and can range from gravity-driven to smoke-like dispersion. System includes all mechanisms necessary for taking powder from bulk sources and depositing them, containing them, and capturing any percentage not applied to product.

United Conveyor Corp.    Waukegan, IL 60085
Mar 18, 2011 Models 4050/6050 condition ash and other abrasive material with water to suppress dust and facilitate transport to trucks and rail cars. While cleaning chains generate contact against ash material, pin-paddles reduce buildup during each cycle stop. Spray nozzles promote water penetration into bed of material for uniform conditioning and can be independently controlled for precise discharge during start up, mixing, and shut down. Shafts and pins use covers made of UHMW PE to resist buildup.

Bematek Systems, Inc.    Salem, MA 01970
Feb 25, 2011 Used for in-line multi-component process development, Laboratory Pilot Mixing System can combine multiple streams of fluids into homogeneous emulsions, dispersions, and blends. Integrated rotor-stator mixing technology exposes 100% of mixed product to same shear action without bypass. Fully scalable, wet-mix process systems are FDA-, USDA-, and 3A-compliant and can produce dispersions down to 1 micron with ±1% repeatability. They mix and blend viscous materials from 1.0 CPS and up.

Mini-Circuits    Brooklyn, NY 11235
Feb 10, 2011 Supplied in 4.5 x 3.1 x 1.2 in. plastic case, model USB-I/O-4D2R is compatible and 32-/64-bit operating systems. Its 4 TTL/LVTTL adjustable digital output lines are buffered through noise reduction and voltage adjustment circuits, creating outputs that can be adjusted from 2.7-5 Vdc. Other features include 2-channel opto-isolated relay outputs, each delivering 24 Vdc/0.375 A; 2.7 ft USB cable; and CD with GUI and API-DLL com object.

Worksaver Inc.    Litchfield, IL 62056
Feb 02, 2011 Equipped with 11 ft³ drum, Model SS-590 allows operator to mix, transport, and place 5 ft³ of concrete. Direct hydraulic drive of gearbox eliminates chain and sprocket maintenance, while all steel welded construction of drum with internal angled paddles facilitates uniform mixing and clean dumping. System additionally includes connect under pressure couplers, flow control valve for control of mixer speed, and lever to control engagement/disengagement of drum.

Mini-Circuits    Brooklyn, NY 11235
Jan 11, 2011 Featuring low-profile package, Model SYM-63LH+ provides IF response from DC-1,000 MHz and is useful in wideband system applications such as IED. Double balanced mixer utilizes core and wire transformers and diode quad in ring configuration. Transformers are designed to provide ultra wide bandwidth using simulation software together with proprietary transformer technology.

Columbus Instruments    Columbus, OH 43204
Jan 03, 2011 Equipped with internal MPU to perform all necessary calculations and signal sending, Pegas 4000 provides means to control up to 4 individual component gases using thermal mass flow controllers. Concentrations can be adjusted on-the-fly or dynamic mixing schedules can also be preprogrammed via included software. After operator enters total flow and concentration of each component gas, front panel rotometer shows flow of mixed gas. Bench/pilot scale mixer measures 13 x 11.5 x 7.5 in.

Quadro Engineering Corp.    Waterloo N2V1A1  Canada
Dec 24, 2010 Accommodating liquid pharmaceutical processors interested in submicron emulsions, suspension milling, and micronization, Ytron® HV0-Emulsifier and Wet Mill provides benefits of high velocity (HV) milling at inline process capacity of 1-5 Lpm. There are 3 models, ranging from 7.5-60 hp, with capacities of up to 285+ Lpm. Each uses energy optimized tooling that operates at tip speeds to 70 m/sec. Sanitary high-speed mechanical seal eliminates potential trap areas around rotor shaft.

amixon, Inc.    Memphis, TN 38118
Dec 17, 2010 Featuring inclined and optionally sine wave-shaped agitator helix, Vertical Mixers provide residual removal rate of 99.983%. After output, residual content in single shaft mixer is only 240 g for 2 m³ of mixed product. Mixers can be operated with varying fill ratios from 10-100%, and just one mixer can be used for gentle homogenization of products as well as intensive de-agglomerate and micro-fine blending of high-viscous fluids.

Baxa Corp.    Englewood, CO 80112
Nov 17, 2010 Capable of volumes as low as 0.2 mL, 12-port ExactaMix(TM) 1200 Automated Compounding Device is intended for small- to mid-sized hospital pharmacies in need of automated approach to compounding large-volume parenteral doses. It automatically compounds sterile doses, minimizing risk of measurement errors, wrong drug selection, touch contamination, and patient infection. Unit can deliver micro and macro ingredients, while volumetric delivery and gravimetric check ensure accuracy.

Gizmo Engineering    Rochester, NY 14613
Nov 16, 2010 Occupying 5 x 4 in. footprint, adjustable-speed (0-90 rpm) mixer utilizes disposable cup (up to 9 oz) and stick and does not introduce air bubbles into mixture. Disposable plastic cup, filled with liquid to be mixed, rotates in cup holder, while disposable tongue depressor, held stationary by clip, stirs contents. Design encourages mixing of small batches of material and can be powered by included AC adapter or 9 V battery.

Westfall Mfg. Co.    Bristol, RI 02809-2721
Nov 12, 2010 Capable of producing 1.64 K value and typical CoV of 0.014, static mixer Model 3053 consists of length of pipe fitted with 1-3 sets of tabbed fins featuring precise geometry that turns flow inside-out for mixing liquids and gases. Fins are radially disposed inside pipe for thorough mixing with low head loss. Available fabricated from PVC, FRP, or 316 stainless steel, with or without PTFE coating, clog-resistant mixer can be supplied in ½-120 in. pipe diameters.

Ross, Charles, & Son Co.    Hauppauge, NY 11788 0615
Sep 01, 2010 Laboratory Dual Shaft Mixer is completely enclosed with all components shrouded for safety. Unit includes reverse vertical lift to raise mix can to mixing position as well as inverter duty motors. Self-contained control panel, variable speed controls, and dual-handed raise and lower controls are also included. Unit is designed for mixing variety of medium-to-high viscosity products up to one million cp requiring combination of low- and high-speed agitation.

Hielscher USA, Inc.    Ringwood, NJ 07456
Aug 23, 2010 With typical flow rates from 2-10 m³/day, Model UIP2000hd is suited for liquid processing, including emulsification, dispersing, particle size reduction disintegration, extraction, and homogenizing. Processor supports sonotrode amplitudes up to 170 micron, liquid pressures to 10 bar, and liquid flow rates to 15 lpm. System delivers power at controlled amplitude level, so that magnitude of mechanical ultrasonic vibrations at sonotrode is constant under all load conditions.

Palmer Manufacturing & Supply, Inc.    Springfield, OH 45504
Jul 21, 2010 Designed to fit all brands of high-speed continuous sand mixers, Palmer FATTBlades(TM) consist of 2 blades that are as wide as discharging chute. They create turbine which discharges mixed sand at increased velocity. These alloy steel blades also prevent sand from reaching end of mixing chamber, and sand is also prevented from staying in chamber longer than necessary. Functionality lessens build-up on mixer shaft, blades, and discharge chute.

The Dolomite Centre Ltd    Royston SG8 5TW  United Kingdom
Jul 13, 2010 Promoting advances in droplet microfluidics, Micro Droplet Systems lets users produce more than 10,000 monodispersed droplets per second. System, built around proprietary microfluidic pumps, connectors, and chips, is specifically comprised of Pressure-based Droplet Starter System, Syringe-based Droplet Starter System, and Droplet Advanced System. Applications include compartmentalized chemistry, high throughput experimentation, and formation of monodispersed emulsions or beads.

Roemtech, LLC    Lewisville, TX 75057
Jul 01, 2010 PlenumAmp PMA-245H features HummBuster technology to remove random noise that can enter classroom audio systems and eliminates ground loop hums caused by inadequate electrical grounds and noisy sound cards. Incorporated switches also allow flexibility in resolving ground loop issues. Ideal for above ceiling applications, dual input, 18 V, 45 W stereo amplifier/mixer measures 5.43 x 4.80 x 1.65 in., allows 3 amplifiers to fit in single rack space, and includes heat sink.

Broadcast Pix    Billerica, MA 01821
Jun 14, 2010 Live Production and Streaming Bundles package Granite(TM) and Slate(TM) video production systems with ViewCast Niagara streaming media appliance and Yamaha audio digital mixing console. Providing essential tools needed to create and stream live video and audio for events, broadcasts, and presentations, bundles can simultaneously output HD-SDI, SD-SDI, analog, and DVI as well as stream either Windows Media or Flash. To facilitate management, integration software is also included.

Arde Barinco    Carlstadt, NJ 07072
Jun 08, 2010 Available with optional Power Lift that raises and lowers mixer in and out of batch, Model CJ-2A uses control panel to vary speed and change direction of mixing impeller. By reversing impeller direction, directed flow through rotor housing switches from upward pumping action to downward pumping action. Adjustable baffle plate, located below surface of liquid, minimizes aeration and maximizes mixing in all areas of process vessel. Both actual rpm and amperage draw are measured.