Lee Industries, Inc.    Philipsburg, PA 16866
Sep 09, 2004 Tri-Mix Turbo-Shear handles mixing problems from dispersion of powders and oils to mixing of viscous materials of more than 2.5 million cps. Center-mounted, high-shear agitator produces speeds as high as 3,600 rpm, while counter-rotating, scraped-surface agitator yields speeds of 10-50 rpm. Shaft design is suited for making toothpastes, mascaras, and gels in batch sizes of 10–1,000 gal.

Alb. Klein Technology Group    Plain City, OH 43064
Sep 02, 2004 Self-contained Vibratory Mixer can mix, blend, or coat granular bulk materials with powders and liquids. Continuous batch mixing system includes built-in bulk material metering hopper, liquid and powder metering systems, and electronic controls for addition of precisely metered mix components and cycle functions, eliminating need for transfer pumps, level sensors, and weigh scales. Short cycle times, measured in seconds, assure constantly freshly mixed material.

A.W. Company    Franksville, WI 53126
Aug 24, 2004 Plural-component, Smart 2K features 3 operating modes: Master mode for closed-loop flow and ratio control of A and B components, Slave mode for ratio control of B component to regulated A component flow rate, and Manual mode. Alarm outputs provide indication of ratio, flow, and pot-life alarms, while backlit LCD display indicates flow rates, ratios, totals, alarms, and control outputs. Smart 2K is suited for polyurethanes, epoxies, paints, stains, varnishes, and adhesives.

Linear Technology Corp.    Milpitas, CA 95035
Jul 28, 2004 Housed in 16-pin, 4 x 4 mm, surface-mount QFP package, LT5521 provides linearity and signal-to-noise performance that allows designers to build compact 3G cellular basestations. It incorporates differential input and output architecture, supporting linearity over operating frequency range of 10 MHz to 3.7 GHz. Able to be used in upconverting or downconverting application, product requires -5 dBm LO signal and has 0.5 dB conversion loss.

Indco, Inc.    New Albany, IN 47151
Jul 19, 2004 Mixing packages consist of pre-engineered systems built to deliver peak efficiency blending and mixing. They are available featuring different mixer types and polyethylene or stainless steel tanks.

Indco, Inc.    New Albany, IN 47151
Jul 15, 2004 Drum agitators with lids are designed for light agitation of materials in 55 gal drums. When carbon steel lids are placed on drum, agitators can be rotated manually with handle or attached to drum agitator drive.

Chemineer, Inc., A Unit of Robbins & Myers, Inc.    Dayton, OH 45401
Jul 13, 2004 QED Plus(TM) mixers handle blending, solids suspension, and high-viscosity applications. Built with leak-proof drywell design, products feature minimum 30,000 hr L10 bearing life. Tapered-shaft engagement system facilitates disassembly and provides secure, true-running connection between shaft and drive. Right angle, heavy-duty gear drive is suited for tight spaces. Features include cast-iron drive housing, 316L stainless pedestal, and NEMA or IEC frame motors.

Delp & Associates    Columbus, OH 43235
Jul 12, 2004 Magnetically-coupled Model 216AF is suited for pressure or vacuum environments, in glass or metal reactors ranging from 100 mL to 70 L. It is capable of variable mixing speeds from slow stir to high-speed mix. Adaptive design allows use of single mixer for open flask stirring or full containment mixing in conditions ranging from 30 in. Hg vacuum to 200 psi. With 4 motor options available, users can choose between directly-coupled electric or air motors.

TAH Industries, Inc.    Robbinsville, NJ 08691 1603
Jun 18, 2004 Series 180A Turbo Plastic Bell Nozzle Static Mixers feature square geometry consisting of series of alternating left and right hand elements with intermittent flow inverters, which channel fluids from walls into center of mixer. Outlet end accepts Pro Tipâ„¢ accessories. Mixers are available in 18, 24, and 36 element configurations and also with integral nut design.

AW-Company    Franksville, WI 53126
Jun 17, 2004 Able to be used with manual or automatic systems, plural-component Smart 2K system has 3 operating modes: Master, which provides closed-loop flow and ratio control of A and B components; Slave, which provides ratio control of B component to regulated A component flow rate; and Manual Control. Alarm outputs provide indication of ratio, flow, and pot-life alarms, while backlit LCD graphic display indicates flow rates, ratios, totals, alarms, and control outputs.

Philadelphia Mixing Solutions    Palmyra, PA 17078 9518
Jun 07, 2004 Sentinelâ„¢ Impeller features wide, large-diameter blades for high flow and uniform distribution of shear throughout mixing process. Fully welded and bolted designs are available with different coatings and surface finishes to meet mixing specifications. Clean-in-place impeller is suited for applications where fluid motion is required to suspend solids, dispense gas, or blend fluids in high-flow, low-shear process.

Philadelphia Mixing Solutions    Palmyra, PA 17078 9518
May 26, 2004 Mixer Caddy(TM) offers safe, portable batch mixing of tanks or totes. It meets most container specs and handles portable mixers from ¼-5 hp, eliminating need for dedicated mixers at each tank or tote. Made from welded steel tube, unit has onboard hand-crank winch capable of lifting up to 500 lb, and locking pins to ensure proper mixer alignment and position. Orange safety paint and safety end caps ensure high visibility and operator safety.

Boekel Industries, Inc.    Feasterville, PA 19053
May 25, 2004 Offered with accessories to accommodate various laboratory containers and apparatus, Grant-Bio mixing equipment includes combined centrifuge/vortex mixers, mini vortex mixer, and series of rockers, rotators, and shakers. All are engineered to provide consistent mixing and agitation conditions to protect sensitive samples. They offer programmable features and operate reliably in variable temperature environments.

Boekel Industries, Inc.    Feasterville, PA 19053
May 20, 2004 Operating in temperatures from 4–55°C, Orbitron III accepts different sized containers, simultaneously, without need for racks or clamps. It provides removable mats for easy cleaning and is available with optional 8 in. trays and 12 in. square double stacking tray. Product has variable speed range of 6–125 orbits/min, load range up to 20 lb, and adjustable timer for up to 12 hr.

IKA Works, Inc.    Wilmington, NC 28405-7419
May 17, 2004 Model MHD provides single-step incorporation and dispersing of solids into liquids. It can be combined with solids feeder, bulk bag unloader, and other equipment to create complete turnkey system for continuous processing. Mixer processes solids concentrations up to 90% as well as extremely viscous liquids. Available in 6 sizes, mixer offers powder feed rates up to 25,000 lb per hour, and nominal liquid flow rates as high as 175 gpm.

Octiv    Berkeley, CA 94710
Apr 23, 2004 Volume Logic for Windows and Mac incorporates 5-band dynamics processor that examines and adjusts audio levels in real-time. Anything playing in iTunes, MP3s, Internet radio, or CDs, is digitally remastered for consistent volume level and spectral balance. Files are not scanned or modified. Product also supports Griffin PowerMate, which consists of black, aluminum knob that plugs directly into USB port, letting users adjust volume or mute sound.

ConProTec Inc.    Salem, NH 03079 2060
Apr 16, 2004 Designed for use with meter mix and dispense machines (MMD), MR Mixers employ rotating mixer element on modified MMD manifold heads. Products, constructed of polyacetal to resist added shear of dynamic mixing, consist of 12 elements and are available with inner diameters of 6, 8, 10, and 13 mm. With bell mouth housing constructed from polypropylene, mixers are suited for hard-to-mix foams and urethane elastomers.

Lee Industries, Inc.    Philipsburg, PA 16866
Apr 08, 2004 Inclined Agitator helps evenly cook high-viscous products and ground meats, eliminating dead spot often found in center of kettle. Slow blender speeds can be used to accommodate gentle products while still mixing thoroughly. Heavy-duty drive can be designed for 2,000,000 cps, and 4 in. flush-bottom ball valve allows for discharge of most products.

IKA Works, Inc.    Wilmington, NC 28405-7419
Apr 06, 2004 Master Plant™ consists of complete processing system for pharmaceutical and cosmetic applications, including vessel, piping, valves, controls, and 2 mixers. Integral spiral agitator and high-shear mixing unit, capable of handling viscosities from 1–100,000+ cps, combine to provide complete mixing, homogenization or dispersion, product transfer, and system cleaning. Available with capacities from 2.5–1,000 gal, system features scrapers and reversible operation.

Torrey Pines Scientific, Inc.    Carlsbad, CA 92010
Mar 11, 2004 Model RT10 is capable of mixing 50, 0.5 ml and 48, 1.5 ml centrifuge tubes with snap-on caps or screw down caps in end-over-end motion. Rotator operates from wall-mounted universal power supply, which provides 12 Vdc to unit. Speed control has off position fully counter-clockwise with 270° of rotation between off and full on. Sample holders are available for 16, 15 ml or 6, 50 ml centrifuge tubes that are rotated horizontally.