Innovative Polymers, Inc.    St. Johns, MI 48879
Nov 29, 2010 Polyester polyol-based polyurethanes of HP-1000 Series are Shore A hardness systems with 1:2 resin to hardener mix ratios and gel times under 25 min at room temperature. Elongations range from 660%-800%, and tear strengths are rated up to 325 pli. Polyether/polyurea polyol hybrids of HP-2100 Series, which include 3 Shore A systems and one Shore D material, exhibit abrasion resistance with as low as 3 mg loss. Elongations vary from 280%-990%, and tear strength ratings are up to 643 pli.

Ticona Engineering Polymers    Florence, KY 41042
Nov 11, 2010 Designed for thermal forming processes, Vectra® T. rex 541 has high melt viscosity and melt strength, with heat deflection temperature of 473°F. Featuring 40% mineral-filled grade, liquid crystal polymer provides both high impact and notched impact strength. It can be used in sterilizable medical trays and equipment and meets flame, smoke, and toxicity requirements for use in aircraft interior applications. Semiconductor and cooking applications are also supported.

Ticona Engineering Polymers    Florence, KY 41042
Nov 03, 2010 Sintered products produced with GUR®X 192 VHMW Macropowder offer porosity and strength for use in liquid and gas filtration applications. Polyethylene resin features molecular weight of 600,000 g/mol, pore size of 205 µm as determined by DIN 66133, and porosity of 47% as determined by DIN 66133. GUR®X 192 Macropowder it suited for variety of applications including wastewater treatment, chemical filtration, drug manufacturing, irrigation, and medical fluid filtration.

Victrex USA, Inc.    West Conshohocken, PA 19428
Oct 29, 2010 Intended for automotive and processing equipment industries, PAEK-based VICTREX WG102 offers dimensional and thermal stability up to and beyond 572°F. Product is chemically resistant to aggressive environments, including service fluids, and contains no PTFE. Compound is also melt processable with standard injection molding equipment and requires no post processing. With optimized melt flow, polymer allows thin-walled intricate component design and ability to consolidate complex parts.

TOPAS Advanced Polymers, Inc.    Florence, KY 41042
Oct 29, 2010 Suited for medical, electrical/electronics, and high-performance films, TOPASBLEND(TM) 14-001, 15-001, and 16-001 provide heat deflection temperatures of 140, 150, and 160°C, respectively. Products offer creep resistance while minimizing warpage and water transmission, and can be processed by standard methods including injection molding and extrusion. Blends withstand repeated steam sterilization up to 200 cycles at 121 or 135°C.

Mayfield Plastics, Inc.    Sutton, MA 01590
Oct 26, 2010 Featuring aesthetics of injection molded parts, Mayfield Thermoformed Enclosures are comprised of custom enclosures, bezels, housings, and panels. Thermoforming and pressure forming processes result in creation of detailed features, such as logos, lettering, openings, and textures. Fabricated in sizes up to 5 x 8 ft. in solid, smoked, or translucent colors, products are made from ABS, PETG, PVC, and other extrudable thermoplastics in material thicknesses to ½ in.

Ticona Engineering Polymers    Florence, KY 41042
Sep 23, 2010 Vectra® TREX(TM) 541 Liquid Crystal Polymer is 40% mineral-filled grade that provides high-impact and notched-impact strengths. Chemical-resistant product can tolerate heat deflection temperature up to 473°F, shock freezing down to -320.8°F, and electromagnetic energy in microwave ovens. Suited for use in medical, aerospace, semiconductor, and food industries, it can be used to produce vacuum-formed large-format sheets or pans that can rapidly heat up and cool down.

Innovative Polymers, Inc.    St. Johns, MI 48879
Aug 17, 2010 Designed for use in casting electronic parts, medical devices, and gaming machine components, white color FX series Shore A hardness polyurethanes exhibit quick handling viscosities of less than 1,000 Cps. Polymers offer work life of 10-15 min, and can unmold parts casted from new products in about 3 hr. Flame-retardant systems after curing provide tear strength and elongation properties of 200% or higher.

Quadrant Engineering Plastic Products Inc.    Reading, PA 19612-4235
Jun 30, 2010 Duratron® D7000 polyimide (PI) material is offered for applications that require thermal performance in 600°F range and are available variety of sheet thicknesses and tube configurations. Homogeneous Semitron® MP370 (modified PEEK) lets builders tailor socket material to application environment and is not subject to soft center or inconsistent physical properties found in injection molded shapes.

DuPont    Research Triangle Park, NC 27709-4425
Apr 29, 2010 By extending performance life of automotive under-the-hood components, DuPont(TM) Zytel® PLUS nylon enables replacement of metals with plastics, subsequently reducing overall vehicle weight. Long-term performance under exposure to heat and chemicals results from DuPont(TM) SHIELD Technology, which combines polymer backbone, polymer modifications, and proprietary additives.

Ticona Engineering Polymers    Florence, KY 41042
Apr 26, 2010 Hostaform® HS15 acetal copolymer delivers optimal mechanical, chemical, and thermal properties. Design of copolymer includes resistance to hot water, automotive fuels, fluids, and concentrated alkaline solutions from pH4 to pH14. Offering long-term thermal stability and chemical resistance, they are suited for automotive, fluid handling, and conveying system applications.

Ticona Engineering Polymers    Florence, KY 41042
Apr 22, 2010 Inherently flame resistant without additives, Vectra G141 is 35% glass-filled, while Vectra G441 is 35% mineral- and glass-filled. Both Vectra G grades offer E/E component manufacturers opportunity to achieve dimensional stability in thin-wall parts, even at temperatures higher than 260°C. Offering potential drop-in solution for FR and HT nylon parts, LCPs are lead-free reflow capable with no moisture related blister issues and no flash and mold deposit.

Celanese Corp.    Houston, TX 77258
Apr 20, 2010 TufCOR(TM) 703 is based on vinyl technology to help caulk formulators achieve appropriate rheology and finishing properties, allowing for proper gunnability and smooth application. It promotes adhesion to multiple substrates, including wood and cement, in dry, interior applications, and also offers filler acceptance that provides wide range of pigment-to-binder ratios. Polymer also meets builders' requirements for freeze-thaw stability.

SABIC Innovative Plastics    Pittsfield, MA 01201
Apr 09, 2010 Featuring high heat resistance and high flow, Lexan(TM) XHT clear, polycarbonate copolymers are suitable for molding thin-wall parts such as medical devices and electrical fuses. Materials minimize color shift and retain clarity over long lifespan. When vacuum-metalized, products made with copolymers can withstand temperatures of up to 195°C without blistering, hazing, or delaminating. Copolymers can be recycled and direct-metalized without lacquering, so scrap can be re-used in molding process.

Tape-Rite Co., Inc.    New Hyde Park, NY 11040
Apr 02, 2010 Suitable for assembly of Hexayurts, Bi-Directional Filament Tapes are made from high-strength nylon and fiberglass with filaments running lengthwise and crosswise for optimal strength and durability. Tapes are available in 3, 4, and 6 in. widths and come on 60 yard rolls.

Ticona Engineering Polymers    Florence, KY 41042
Mar 03, 2010 Fortron® 6162XF is low-swell, mineral/glass-reinforced polyphenylene sulfide that is resistant to oxygenated gasoline, diesel, biodiesel, and aggressive fuels. It withstands continuous use in temperatures from 320-464°F and can tolerate short-term exposure to up to 518°F. Product is also resistant to chemicals and has dimensional stability, creep resistance, and no moisture absorption. Applications can include impellers, outlet covers, and fuel injector components.

Ticona Engineering Polymers    Florence, KY 41042
Dec 17, 2009 Hostaform MT® 8U05 is UV-detectable acetal copolymer contains additive that allows inspection of components with UV light, which can help improve quality control in production of complex medical devices. Sterilizable, biocompatible grade offers resistance to chemicalsand corrosion and is also resistant to slip and friction. It complies with requirements of U.S. FDA and of European Union relative to food compatibility.

Chem Polymer Corp.    Fort Myers, FL 33911
Dec 11, 2009 Chemlon 217 GI is 17% glass fiber-reinforced nylon 6 compound with levels of stiffness, flexural strength, and tensile strength suitable for injection molded applications that undergo challenging dynamic forces. Impact-modified and UV-stabilized, it suitable for outdoor and low-temperature environments. Compound can be used in applications such as office chairs, outdoor power equipment, outboard motor covers, and gun stock components.

RNR Plastics, Inc.    Raynham, MA 02767
Nov 27, 2009 Clear non-phthalate RNR Child-Safe Vinyl is double-polished, CPSIA- and TPCH-compliant material that is safe for manufacturing and packaging children's products. Available off-the-shelf in 6-12 ga thicknesses, recyclable DPC vinyl can be used for manufacturing made-to-order vinyl pockets, sleeves, and display holders in variety of styles and sizes from 2 in.² up to 24 x 36 in. It can be used for toys and as loose-leaf and stationary items.

Victrex USA, Inc.    West Conshohocken, PA 19428
Nov 23, 2009 Offering optimized wear rates and coefficient of friction, VICTREX® WG101(TM) tribological compound meets requirements of mechanical load and tribological performance in challenging thermal/chemical environments. It features optimal melt flow, which allows thin walled intricate component design. With wide range of applications from full plastic wear bushings to composite bushings to vane tips in vacuum pumps, PTFE-free, RoHS compliant compound meets GADSL requirements.