Newtex Industries, Inc.
Victor, NY 14564
Nov 18, 2009 Aluminized fabrics in Z-Flex(TM) MLA(TM) series is used for protective apparel worn by manufacturers of radiant heat resistant systems. MLA(TM) process incorporates 5-layer protective barrier and bonding system that delivers radiant reflectivity as well as moisture and vapor protection in addition to performance features offered by substrate fabrics, which include Zetex texturized fiberglass, fine filament E-glass fabrics, Lenzing FR® Rayon, DuPont Nomex® and Kevlar®, PBI, and O-PAN/Para-Aramid blends.

Stahl USA
Peabody, MA 01960
Nov 12, 2009 FI-22-532, is aqueous wax dispersion suited to both full grain and corrected grain leathers. Filler enhances polishing effect by darkening finish while also adding brightness. Resulting handle is warm, soft, and natural and maintains natural aniline appearance. Creamy white opaque liquid FI-22-532 withstands high temperature plating.

DuPont Co., Packaging & Industrial Polymers
Wilmington, DE 19898
Nov 10, 2009 Exhibiting strength, dimensional/thermal stability, and corrosion resistance, DuPont(TM) Kevlar® K29 AP (Advanced Performance) fiber can be used to strengthen and reinforce range of products for automotive, construction, oil/gas, and utility applications. Specific uses for this material, available in range of deniers, include tires, belts, and hoses as well as and ropes, composites, and electro mechanical cables.

Stahl USA
Peabody, MA 01960
Oct 30, 2009 Wax filler, EX-FI-13-547 is designed for use in association with "American Lifestyle" finishes on variety of leathers. Opaque wax maintains waterproof resistance in finishes, and should be preheated to 75°C and applied using either padding or roller heated to 65-80°C. High melting point wax flows well with high temperature plating and can be used either alone or blended with other suitable oils or waxes to modify properties.

MH&W International Corporation
Mahwah, NJ 07430
Oct 28, 2009 Available in 8.3 x 11.7 in. sheets or die-cut parts, TP-S3LS pads contain less than 50 ppm of silicone while providing 3.0 W/mK of thermal conductivity between hot components and their heat sinks. Standard sheet thicknesses range from 0.020-0.196 in., and compliance allows for compression and filling of air gaps between irregular mating surfaces. Used in temperatures up to 200°C, product has UL 94 flame class rating of V-0 and 55 Shore 00 hardness.

General Ruby & Sapphire Co., Div. of EWM General Corp.
New Port Richey, FL 34653
Oct 28, 2009 Suited for optics, electronics and optoelectronics, fine mechanics, and laser technologies, Ruby and Sapphire Parts offer transmission range from microwave, vacuum UV, and visible through IR. Refractive index has low dependence on temperature, making sapphire suitable for imaging optics applications. Hard and scratch resistant, Sapphire does not melt until 2,040°C, is insoluble in most industrial solutions, and is resistant to corrosion from acids.

Solutia, Inc.
Saint Louis, MO 63166
Oct 20, 2009 With light transmittance level of 0%, Vanceva Absolute Black adds privacy and balance to interior and exterior laminated glass applications. Opaque PVB-based interlayer can be used as single layer in glass laminate or combined with colored interlayers. Applications range from residential doors, side-lites, and transoms to kitchens and baths, partitions, and conference rooms.

Momentive Performance Materials
Strongsville, OH 44149
Oct 12, 2009 Available in high consistency rubber and liquid silicone rubber, silver-based StatSil Elastomers offer built-in antimicrobial protection making them suited for medical, pharmaceutical, cosmetics, and food industries. Products offer resistance to chemicals, provide biocompatibility, are virtually odorless, and are available with many international recognized approvals such as USP Class VI, ISO 10993, BfR and FDA.

Bekaert Specialty Films
San Diego, CA 92123-4359
Oct 02, 2009 Designed to insulate electronics and protect photovoltaic cells from environment, Solar Gard PV T Series provides moisture barrier, solar resistance, and dielectric strength. Backsheets come in 2 thicknesses for different electrical insulation performance, and are available in roll form that fits wide range of photovoltaic panel sizes and configurations.

Park Electrochemical Corp
Melville, NY 11747
Sep 25, 2009 Mercurywave(TM) 9350 has controlled dielectric constant of 3.5 and is available in copper-clad laminate and prepreg forms. Copper-clad laminates come in wide array of thicknesses, including thin core and industry standard thicknesses of .020 and .030 in. Lead-free assembly compatible and RoHS compliant, Mercurywave(TM) 9350 is suited to RF and microwave applications such as broadband communications, WiFi/WiMax and RFID, as well as power amplifier, filter, combiner, radar, and guidance devices.

Parker Hannifin Corp.
Lexington, KY 40512
Sep 18, 2009 Part of Parofluor ULTRA(TM) perfluorinated elastomer series, FF374-60 and FF376-80 are formulated for minimal particle generation and minimal extractable levels while maintaining low erosion rate in aggressive plasma chemistries. Both are deep purple in color and free of inorganic filler systems, ensuring minimal metal ion levels. They are recommended for various static and dynamic applications found in semiconductor deposition processes.

Honeywell International, Inc.
Morristown, NJ 07960-4648
Sep 18, 2009 Designed to transfer heat generated by LED lamps, LTM6300-SP Thermal Interface Material helps minimize power use and maximize lifespan for light emitting diodes. Used mainly as screen printable paste, phase change material was designed for LED backlights used in flat panel displays, but packaging technology can also be implemented in LEDs used in wide range of industries, from automobiles to computers.

Lab Armor, Inc.
San Antonio, TX 78230
Sep 17, 2009 Suited for laboratory use in temperatures from -80 to over 350°C, Bath Armor(TM) Beads replace water in water baths, aluminum blocks in dry baths, and ice in ice buckets. Beads thaw, warm, and chill samples with optimal thermal efficiency, while avoiding common temperature fluctuations caused by evaporation. Since beads are self-supporting, racks and clip required to hold sample containers in position are eliminated and sample containers can be positioned at any angle.

Indium Corporation of America
Utica, NY 13502
Sep 16, 2009 Heat-Spring® metallic thermal interface material is soft metal alloy developed as compressible metallic shim suitable for IGBT mounting applications. Material's Heat-Springs are compressible soft metal performs that adapt to irregularities in mounting surface and are conductive both thermally and electrically. No special mounting apparatus is required. Heat-Springs are made of 100% recyclable and reclaimable metal and are considered green interface material.

Pro-Link, Inc
Canton, MA 02021
Sep 16, 2009 Fast-acting Premium Ice Melter is safe for vegetation as it contains no harmful ingredients. Applied at beginning of snowstorm, its green-colored granules ensure visibility and proper application to all areas without overapplication. For ice removal, it is applied evenly over surfaces at rate of one cup/yd² for each ¼ in. of ice.

Parker Hannifin Corp.
Lexington, KY 40512
Sep 15, 2009 Exhibiting steam, base, and compression set resistance, FF580-75 is suited for harsh operating conditions where thermal stability and chemical resistance are required. This 75 durometer perfluorinated elastomer, compatible for use in bases, amines, steam, ethylene oxide, acids, and other aggressive chemicals, may be used in chemical processing, energy, oil and gas, paint spray, and general industrial markets.

Cox Sales Co.
Roanoke, VA 24016
Aug 17, 2009 Used for bindery operation, Blackjack Quick-dry Padding Adhesive suits printers who require accelerated cure times or want to apply just one coat of adhesive. Soft tear solution, characterized with optimal solids content and minimal water is recommended for many types of paper, from cardboard to tissue. White solution dries clear and is suited for tabbing, bookbinding, and interleaving carbon.

Pacor Inc.
Cinnaminson, NJ 08077
Aug 03, 2009 Designed for facilitated installation, UltraGard(TM) precut aerogel insulation cuts energy loss and extends pipe rack efficiencies in piping systems used in chemical and hydrocarbon processing operations. Construction consists of silica solids derived from gel in which liquid component has been replaced with gas and reinforced with nonwoven, glass fiber batting. Environmentally safe, hydrophobic product is offered in 5 or 10 mm thicknesses; 1½, 2, and 3 in. widths; and 59½ in. length.

Pacor Inc.
Cinnaminson, NJ 08077
Jul 27, 2009 Available for high temperature and cryogenic environments, UltraGard(TM) Precut Aerogel Insulation is hydrophobic and can be used effectively in tight access areas. Aerogels consist of lightweight silica solids derived from gel in which liquid component has been replaced with gas, and reinforced with nonwoven, glass fiber batting. Environmentally safe insulation is available in 5 and 10 mm thicknesses, nominal length of 59½ in., and widths of 1½, 2, and 3 in.

Pro-Link, Inc
Canton, MA 02021
Jul 24, 2009 Mega-Loop 12 in. microfiber system cleans floors, or can be used to clean tabletops, desks, counters, and other surfaces by attaching to Velcro hand holder. System is suited for cleaning cafeteria floors, classrooms, and variety of other areas and counter surfaces. Optional 2 gal charging system helps to reduce chemical waste and ensure effective cleaning.