Dow Corning Corp.
Midland, MI 48686 0994
Oct 06, 2009 Reactive silicone glycol surfactant with carbinol functionality, Dow Corning 55N provides abrasion resistance, leveling, and slip to clear and pigmented paints, coatings, and inks without generating excessive foam or compromising gloss or clarity of finished coating. Low VOC additive performs well in water-based, solvent-based, and UV-curable systems and is compatible with wide range of resins, including alkyd, acrylic, epoxy and polyurethane.

Tempil, Inc.
South Plainfield, NJ 07080
Aug 07, 2009 Lot numbered for NIST traceability, Tempilstik° indicators make marks that melt within 1% of their rated temperatures. They are supplied in adjustable aluminum holder with pocket clip and come in 100+ temperature ratings systematically spaced between 100 and 2,500°F. Below its temperature rating, products leave dry, opaque chalk mark. When rating is reached, a liquid smear remains. Upon cooling, melted mark will solidify with transparent or translucent appearance.

Creative Materials Inc.
Tyngsboro, MA 01879-2724
Jul 03, 2009 Optimized for flow and print quality, Type 125-17 has translucent, sky-blue color and is used as protective insulating layer as well as crossover layer for polymer thick-film conductive inks in printed circuit applications. Flexible and UV-curable coating, compatible with range of substrates, is resistant to humidity, temperature fluctuations, and solvents. Low-odor solution delivers printed, void-free coating designed for use with various conductive silver and carbon inks.

Creative Materials Inc.
Tyngsboro, MA 01879-2724
Mar 06, 2009 Electrically conductive ink, 125-10, has typical sheet resistivity of 15 milliohm/square/mil and adheres to polyester, polyimide, polycarbonate, glass, and various other substrates. Applications include RFID antennas, EMI/RFI shielding, polymer thick film circuitry, and membrane switches. Nominally applied via screen-printing and syringe dispensing, other versions of 125-10 are available for flexographic, rotogravure, stenciling, and spraying processes.

Creative Materials Inc.
Tyngsboro, MA 01879-2724
Feb 04, 2009 Providing conductivities as low as 4 W-cm, screen-printable 124-31 Ink and Coating adheres to variety of substrates without prior surface treatments. Optical properties allow end user to print conductive traces with limited opacity at thicknesses up to and over 1 mil. Offering resistance to creasing and scratching, as well as solvents, ink is suited for high-resolution touch screen displays, electronic labels, and printed electroluminescent panels.

DuPont Microcircuit Materials
Research Triangle Park, NC 27709
Dec 05, 2008 DuPont 5064 silver conductive ink consists of polymer thick film technology, developed with combination of silver powder and resin that promotes conductivity. Designed for RFID antennae, biosensors, membrane touch switch, and interconnection circuitry applications, material allows for single pass printing and can adhere to various substrates.

Creative Materials Inc.
Tyngsboro, MA 01879-2724
Oct 01, 2008 Adhering to variety of transparent conductive oxides, Silver Conductive Inks and Adhesives operate in high humidity environments and provide optimal environmental aging. Inks are used in grid lines and buss bars printed onto TCO's in thin film solar cells, while adhesives connect multiple solar cells to build arrays. Two-component 118-09A/B187 ink offers 0.0005 W-cm volume resistivity, while single-component 123-39C adhesive features volume resistivity of 0.0003 W-cm.

Methode Electronics Inc. / dataMate Products
Chicago, IL 60706
Sep 15, 2008 Water-based product no. 9101 is highly conductive when printed with resolution of 600 dpi and does not require secondary curing or additional processing. When printed on glossy photo-grade paper, it has uniform, metallic-gold appearance. RoHS-compliant ink contains conductive silver nano-particles, and near full conductivity is achieved within few minutes of printing. Properties suit printed electronics, security printing, RFID, signage, display, backplane, and photovoltaic markets.

Trans Tech America, Inc., An ITW Decorating Co.
Carol Stream, IL 60188
Jul 30, 2008 Suited for use in medical applications, Type 434 ink offers high opacity and adhesion to both untreated and pretreated polypropylene substrates. Ink features fast drying single component and offers fast start-up, especially in rotary applications. High gloss ink is available in both black and white.

Air Products & Chemicals, Inc.
Allentown, PA 18195
Jun 13, 2008 Designed for waterborne coating and ink applications, ZetaSperse® low-VOC and APE-free additives combat viscosity build, color drift, flocculation, and other challenges to provide dispersion stability. Solutions are available for problematic pigments such as metal salt reds and other organic pigment types; carbon black pigments; quinacridone, perylene, and similar pigment chemistries; as well as DPP, azo, and phthalocyanine pigment chemistries.

Creative Materials Inc.
Tyngsboro, MA 01879-2724
Apr 18, 2008 Resistant to flexing and creasing, Type 125-04 contains silver/copper alloy with sheet resistivity of 25 mW/sq/mil. Applied by screen printing, dipping, and syringe dispensing, it exhibits best properties when cured for several minutes at 150°C. With thermal stability good to 325°C, product has viscosity of 30,000 cps and volume resistivity of 0.000063 W/cm when cured. Applications include RFID antennas, EMI/RFI shielding, and membrane switches.

International Coatings Co., Inc.
Cerritos, CA 90702
Mar 05, 2008 Providing alternative to other PVC-free plastisol ink products, GEN IV Series(TM) consists of PVC-free, Phthalate-free, high solids inks that perform equally well on manual and automatic printers. Products do not dry on screen and require no harsh solvents or chemicals for clean-up. Series includes 19 primary colors as well as several specialty inks, such as Clear Base, Puff Additive, Foil/Transfer Adhesive, and Glitter Base.

Sun Chemical Corp.
Northlake, IL 60164
Jan 30, 2008 UV TRANS(TM) gives screen printers ability to print transparent windows, and eliminates need for protective masking after printing is complete. Targeting hi-tech and automotive industries, scuff-resistant UV ink system is designed for either polycarbonate or top-coated polyester graphic overlay windows, and provides clarity and printability.

Tempil, Inc.
South Plainfield, NJ 07080
Jan 10, 2008 Suitable for use as packaging indicators in all hydrogen peroxide plasma sterilization processes, Tempilº Plasma Process Indicator Inks change color to signal that pouch or package containing health-care product has been exposed to prescribed sterilization conditions. Available in blue or red starting colors, inks can be printed on Tyvek medical packaging material. Environmentally stable inks are heavy metal- and VOC-free and can be thinned with water if required.

Pad Print Machinery of Vermont
East Dorset, VT 05253
Sep 12, 2007 Designed for those who print on catheters and other medical devices, Class VI and Class I USP-certified inks adhere to various substrates and are certified for use with their corresponding hardeners and/or thinners. PLTF Black and PLT4 Black, Blue, and Yellow all pass required Biological Reactivity Tests for USP Plastic Class VI. Six colors of pad printing ink PLT4G - certified for specific outside-the-body medical uses - pass Biological Reactivity Tests for USP Plastic Class I.

Matthews International Corp., Marking Products Div.
Pittsburgh, PA 15206 4407
Jun 26, 2007 PX Series of high-contrast inks are suited for use in Matthews Drop-on-demand and other manufacturers' DOD ink-jet systems. Water-based choices, PX-370 and SX-370, provide strong contrast with HAPS-free printing and are designed for package printing applications on porous materials, while solvent-based PX-670 and PX-470 inks are quick drying and suit applications requiring permanent marking on non-porous materials. Inks are available in canister, liter, and 5 gal pail sizes.

Matthews International Corp., Marking Products Div.
Pittsburgh, PA 15206 4407
Jun 26, 2007 Formulated for use with existing Drop-on-Demand 8000 Series ink-jet systems and standard valve ink-jet print heads, Series SCP-900 inks provide adhesion, UV stability, and abrasion resistance. Average dry time is between 1-3 sec, depending on substrate and boldness of mark. Products are available in red, blue, green, black, and white colors.

Matthews International Corp., Marking Products Div.
Pittsburgh, PA 15206 4407
Jun 25, 2007 Intended for use on metal, plastic, and rubber, Series SCP-800 is formulated to provide strong contrast, and is available in light blue, yellow, and white for marking on wide range of materials. Inks offer abrasion, UV, and weathering resistance. Designed for use with existing Drop-on-Demand ink-jet systems, inks work with DOD 8000 Series, Midi or Maxi, and 28 or 64 mm Standard Valve ink-jet printheads.

Conductive Compounds, Inc.
Londonderry, NH 03053
Jun 15, 2007 Designed for defibrillator pads and disposable EEG and EKG sensors, Models AGCL-510 and AGCL-675C silver chloride inks are used for gravure/flexographic, screen, and pad printing. They adhere to polyester, polyimide, polycarbonate, vinyl, urethane, and other plastic substrates. Featuring crease resistance and surface hardness, inks can be custom blended to adjust resistance values for required level of electrical conductivity and to adjust level of chloride to silver.

HSA USA, LLC
Perth Amboy, NJ 08861
Jun 08, 2007 DNP-631 UV and DNP-IR IR Invisible Ink cartridges contain UV or IR dyes respectively, which are visible to the human eye when exposed to UV or IR light or by using laser scanner or camera system. Designed for high-speed, code-based packaging applications, inks assure packages are sent to intended recipients while protecting their privacy and security. Print cartridges can be snapped in and out and include high-capacity bulk ink delivery system.