DuPont Co., Packaging & Industrial Polymers
Wilmington, DE 19898
Nov 10, 2009 Exhibiting strength, dimensional/thermal stability, and corrosion resistance, DuPont(TM) Kevlar® K29 AP (Advanced Performance) fiber can be used to strengthen and reinforce range of products for automotive, construction, oil/gas, and utility applications. Specific uses for this material, available in range of deniers, include tires, belts, and hoses as well as and ropes, composites, and electro mechanical cables.

DuPont
Research Triangle Park, NC 27709-4425
Jun 25, 2009 Carpet made with Sorona® fiber offers combination of performance and environmental sustainability. Material is 37% renewably sourced by weight and contributes to Leadership in Energy and Environmental Design (LEED®) credits in 3 categories: MR Credit 6, Rapidly Renewable Materials; IEQ Credit 4.3, Low-Emitting Materials; and MR Credit 5, Regional Materials. In addition to bleach and fade resistance, fiber exhibits natural, permanent stain resistance that will not wash or wear off.

Tape-Rite Co., Inc.
New Hyde Park, NY 11040
May 27, 2009 Industrial Gasketing foam tape, available in urethane, neoprene, felt, cork, Gore-tex, self-adhesive, and non-adhesive materials, are used to create seal between 2 surfaces. Product has adhesive on one side and is soft enough to conform to other surface when pressed down. Some products may also be used as anti-skid and anti-scratch pads, and all versions can be cut to shape. Printing and tape splitting capabilities to widths from 1/64-6 in. are available.

DuPont
Research Triangle Park, NC 27709-4425
Apr 17, 2009 Engineered to react and expand when temperatures reach 250°F or higher, DuPont(TM) Nomex® On Demand(TM) detects emergency conditions and automatically expands to trap more air for greater thermal insulation. Material meets National Fire Protection Association standards. Other suitable applications include driver wear suits for auto racing, wildfire control, oil and gas operations, and military.

AGY
Aiken, SC 29801
Apr 13, 2009 Used in printed wiring board applications, L-Glass(TM) exhibits dielectric constant (Dk) and dissipation factor (Df) suited for designs requiring increased signal speeds and integrity. Dk is 4.86 and Df is 0.0050 at 10 GHz, and coefficient of thermal expansion (CTE) is 3.9 ppm/°C. Suited for use in IC packaging, fiber is available in various yarn counts that will allow production of low-loss fabrics analogous to styles 106, 1080, 2113/2313, and 2116.

Pres-On Products, Inc.
Addison, IL 60101
Mar 18, 2009 Designed to protect glass, windows, doors, and mirrors, Pres-On Separator Pads adsorb vibration and maintain position to prevent breakage. Adhesive-backed Pres-On pads are available in felt, foam, and cork, while non-adhesive pads are sold in cork/foam or foam/foam combinations that employ static cling to hold instead of adhesive. Pres-On Separator Pads are supplied on kiss cut rolls or pads for fast application. Standard patterns include 1/2, 5/8, 3/4 or 1 in. squares.

Forta Corporation
Grove City, PA 16127
Mar 11, 2009 Asphalt reinforced with FORTA-FI(TM) exhibits reduced rutting and cracking for extended longevity. Requiring no additional equipment or modifications in placement/compaction practices, fibers distribute uniformly and evenly within seconds when mixed in drum or batch plants. Material contains aramid and polyolefin fibers as well as other materials known for their strength, durability, and binding properties. Hot and Warm Mix Asphalt as well as hot/cold patch formulations are available.

Zeus Industrial Products, Inc.
Orangeburg, SC 29115
Feb 10, 2009 Available in strands ranging from .003-.040 in., PEEK Drawn Fiber comes in natural, black, red, green, yellow, blue, orange, and violet to meet specific industry requirements for braiding identification. Woven braiding creates sleeve that can be placed over existing wire assemblies to guard against chaffing. Able to perform in temperatures up to 480°F, fiber produces low smoke and gas emissions, making it suited for aerospace, automotive, and textile industries.

Diolen Industrial Fibers
ARNHEM 6800 TC  Netherlands
Sep 17, 2007 Made with Fortron® polyphenylene sulfide, high-tenacity Diofort® is inherently flame-retardant and chemical resistant. It can be combined with glass, carbon, and other polymer fibers to yield blended fabrics. In addition to reinforcing hydraulic oil hoses in power steering systems where it reduces noise and vibration, product can be applied in fuel lines and charge-air coolers to provide resistance to high pressure and temperature while allowing flexibility.

Fujikura Europe Ltd, Fibre Optics Division
Chessington, Surrey KT9 2NY,  United Kingdom
Mar 19, 2007 FutureGuide SR7.5 has min bend radius of 7.5 mm and can be used to deliver high-bandwidth communications directly into homes or offices. Fibre returns to original condition without any deformation or marking on sheath when twisted or bent. Product is available in MageTsuyo SR7.5 patch cord, which has 4 mm OD and can withstand tension up to 68.5 N as well as lateral pressure to 1,200 N/25 mm.

DuPont Co., Packaging & Industrial Polymers
Wilmington, DE 19898
Aug 23, 2006 Consisting of Kevlar® pulp and elastomer, composite optimizes modulus and wear resistance without having negative impact on other critical rubber properties. Rigid molecular structure of Kevlar aramid fiber provides thermal stability and protects against thermal hazards up to 800°F. Composite material is suited for automotive, motorcycle, and bicycle tires as well as hoses, belts, seals, gaskets, pump liners, diaphragms, and molded goods.

Ferrari Textiles Corp.
Pompano Beach, FL 33069
Nov 29, 2005 Suited for new buildings, renovations, or building extensions, Stamisol FT 371 is rated with M1, B1, and Euroclass Bs2d0 fire classifications and withstands temperatures from -22 to 158°F. Controlled biaxial weaving performed on polyester scrim during coating process ensures dimensional stability in warp and weft directions. Custom-fitted to specific structure, composite textile acts as insulating barrier in cold weather and provides protection from sun in warmer months.

Hospital Specialty Company
Highland Heights, OH 44143
Jan 14, 2005 San-Eazâ„¢ Sanitary Door Handle Tissues help keep hands clean when leaving public restrooms. When exiting, patron pulls tissue from dispenser, covers door handle with tissue while opening door, and tosses tissue in nearest trash receptacle. User's clean hands never touch potentially dirty handle. San-Eazâ„¢ Tissues are packed 100 per dispenser. Refills are available in 100-count packages.

Johns Manville
Denver, CO 80202
Nov 17, 2004 LinaTex offers fabricators and installers abuse-resistant insulation for lining sheet metal air ducts. It is made from 100% post-industrial recycled, long strand fiberglass bonded with thermosetting resin. Airstream surface is protected from damage during fabrication by black fiberglass mat surface, and edge-coating covers leading edges per NAIMA/SMACNA requirements. Liner complies with ASTM C 1071 thermal and acoustical performance standards.

Johns Manville
Denver, CO 80202
Oct 20, 2004 Available in 4 mm fiber lengths for thermoplastics such as PA, PP, PBT, and SMA, ThermoFlow® strands exhibit processing, mechanical, and matrix bonding properties suited for extrusion applications. Product features minimal fines and bulk density as well as uniform bundle size and shape. Featuring consistent glass content, strands are suited for automotive, electrical and consumer goods applications.

Newport Corp.
Irvine, CA 92606
Feb 11, 2004 Photonic Crystal Fibers (PCF) contain air voids or holes, which serve 2 purposes; central hole forms hollow core fiber suitable for carrying high laser power levels, while arrays of tiny through holes lower effective refractive index of glass fiber core and/or cladding. Products include endlessly single mode fiber, hollow core fiber, polarization preserving fiber, photonic bandgap fiber, and fiber with non-linear performance.

Plastomer Products Division
Newtown, PA 18940 1803
Sep 17, 2003 PLASTOLONâ„¢ Fibers, available in flat format, can also be twisted in single or multiple strands to provide threads measuring from 600 denier and higher. Physical properties include thermal resistance to 550°F, resistance to intense UV exposure, and low co-efficient of friction. In particulate filtration applications, dust collector bags made with PLASTOLONâ„¢ Filtration Fibers withstand extreme operating temperatures and chemical environments.

Plastomer Products Division
Newtown, PA 18940 1803
Jul 23, 2003 PLASTOLONâ„¢ Tapes provide insulation in wire and cable wrapping applications. They offer heat resistance, low smoke characteristics, and allow for uniform wall thickness. PLASTOLONâ„¢ Fibers are suitable for industrial woven fabrics, sewing thread, and self-lubricating bearings. In awning and marine applications, UV-resistant properties maintain seam strength. Chemically inert fibers withstand caustic compounds in wet and dry filtration applications.

Banner Engineering Corp.
Minneapolis, MN 55441
Jan 14, 2003 STEELSKIN(TM) plastic sensing fibers feature DURA-BEND(TM) multi-core construction and braided 304 grade stainless steel over-jacket for wear resistance. With 2.9 mm OD, fibers carry light through bend radius of 10.0 mm with no signal loss. Fibers are available in 3 and 6 ft standard lengths and operate in temperatures from 0-70°C. Fibers terminate with plastic ferrules to FP style amplifiers and can be used with fiber optic photoelectric sensors.

Naugahyde
Stoughton, WI 53589-2481
Apr 29, 2002 NaugaTek fabrics are designed for use in seating applications. They are available in 11 colors and meet requirements of hospitality and health care industries. Other uses include transportation, recreation, and commercial applications.