Matthews International Corp., Marking Products Div.    Pittsburgh, PA 15206 4407
Jun 25, 2007 Intended for use on metal, plastic, and rubber, Series SCP-800 is formulated to provide strong contrast, and is available in light blue, yellow, and white for marking on wide range of materials. Inks offer abrasion, UV, and weathering resistance. Designed for use with existing Drop-on-Demand ink-jet systems, inks work with DOD 8000 Series, Midi or Maxi, and 28 or 64 mm Standard Valve ink-jet printheads.

Eastman Chemical Co.    Kingsport, TN 37662-5075
Jun 21, 2007 EastONE S85030 Water Dispersible Polymer Copolyester enables use of sustainable processes to achieve micro fiber structures without requiring chemical wash processes. Suited for nonwoven industry use, this copolyester is used in segmented pie or islands-in-the-sea fibers to create microfiber nonwovens that emulate properties associated with woven materials.

Whitehouse Scientific    Chester CH3 7PB  United Kingdom
Jun 20, 2007 Comprised of single size glass beads greater than 1 mm in diameter, Monodisperse Standards have narrow particle size distributions and come in sets of 5 single shot bottles from 0.1-1.0 g. These reference calibration beads come with NIST-traceable test certificate and suit application areas such as pharmaceuticals, foodstuffs, polymers, and specialty chemicals.

Oce North America    Fairport, NY 14450
Jun 19, 2007 Used by print service providers, Glossy Photopaper (OPGPHOTO) is suited for use in production of short-term photorealistic point-of-purchase displays, presentations, exhibit signage, and short-term photo reproductions. This 7 mil, 170 gsm soft-gloss photographic paper is optimized to produce vivid, high color gamut photographic prints when imaged with aqueous dye-based inks. Paper is offered in 24, 36, 42, 50, and 60 in. widths in rolls 100 ft long.

Victrex plc / Victrex USA Inc.    Greenville, SC 29615
Jun 18, 2007 Including 1000 series of crystalline films and 2000 series of amorphous films in filled/unfilled versions, APTIV(TM) Film is available in thicknesses from 6-750 microns and in widths up to 1.5 m. FDA- and RoHS-compliant films feature high temperature capability, chemical resistance, scratch resistance, radiation resistance, mechanical properties, barrier and electrical properties, hydrolysis resistance, low toxicity of combustion gases, and low moisture absorption.

Conductive Compounds, Inc.    Londonderry, NH 03053
Jun 15, 2007 Designed for defibrillator pads and disposable EEG and EKG sensors, Models AGCL-510 and AGCL-675C silver chloride inks are used for gravure/flexographic, screen, and pad printing. They adhere to polyester, polyimide, polycarbonate, vinyl, urethane, and other plastic substrates. Featuring crease resistance and surface hardness, inks can be custom blended to adjust resistance values for required level of electrical conductivity and to adjust level of chloride to silver.

DuPont Co., Packaging & Industrial Polymers    Wilmington, DE 19898
Jun 14, 2007 Optilon(TM) Anti-Reflective Coatings are liquid formulations that enable manufacture of single-layer films, which minimize surface reflections on front of LCD displays. They also provide abrasion resistance, smudge resistance, neutral color, low haze, and high light transmission. Coatings will play key role in high definition TV picture quality by optimizing contrast and enabling bright, vivid colors.

HSA USA, LLC    Perth Amboy, NJ 08861
Jun 08, 2007 DNP-631 UV and DNP-IR IR Invisible Ink cartridges contain UV or IR dyes respectively, which are visible to the human eye when exposed to UV or IR light or by using laser scanner or camera system. Designed for high-speed, code-based packaging applications, inks assure packages are sent to intended recipients while protecting their privacy and security. Print cartridges can be snapped in and out and include high-capacity bulk ink delivery system.

Foam Design, Inc.    Lexington, KY 40581
May 31, 2007 In addition to cushioning metal products against shock, Rust-Shield(TM) contains Volatile Corrosion Inhibitor (VCI) compound that vaporizes and coats molecules on surface of metal to prevent corrosion. Product is suited for storing or shipping of metal parts. When parts are unwrapped, protective molecular layer immediately begins to dissipate. This leaves metal parts clean, corrosion-free, and ready to use.

Excel Scientific Inc    Wrightwood, CA 92397
May 25, 2007 Measuring 200 µm thick, AbsorbMax(TM) Adhesive Films are made of light-absorptive black vinyl, shaped to fit either top or bottom of 96-, 384-, or 1,536-well microplates. They are available in either sterile or non-sterile and are recommended for temperatures from -40 to +80°C. Typically used with black microplates, films can protect light-sensitive samples during storage or minimize stray light, reflection, and well-to-well crosstalk in fluorescence assays.

Boise Cascade Corp.    Boise, ID 83728
May 24, 2007 Featuring 96 brightness rating, HD:P(TM) Presentation Laser Paper comes in 3 text weights including 24, 28, and 32 lb and 2 cover weights including 80 and 100 lb. Suited for use in laser printers, color copiers, and digital printers, paper is available in traditional cut sheet sizes as well as sizes specific to digital presses such as 17 x 11, 18 x 12, and 20.5 x 14.33 in.

Goodfellow Corp.    Oakdale, PA 15071
May 24, 2007 Offered in aluminum, stainless steel, nickel, vitreous carbon, alumina, and silicon carbide, chemical resistant foams are reticulated with metal, carbon, and ceramic. They feature high surface area to volume ratio and high strength to weight ratio, and can be conductive/insulating depending on material chosen. Applications include porous electrodes, high-temperature insulation, filters, storage batteries, and 3D network of reinforcing fibers in composites.

Dow Corning Corp.    Midland, MI 48686 0994
May 18, 2007 Designed to require minimal cycle times to accommodate high-speed manufacturers, Silastic® LC-70-2004 liquid silicone rubber (LSR) has 70 shore hardness and is formulated for optimal mechanical properties and clarity. Material meets FDA21 CFR 177.2600 and BfR, XV food contact standards and is suited for precision-production of complex parts. Applied through automated injection, material offers smooth release from mold to help produce complex parts design with optimal consistency.

Solutia, Inc.    Saint Louis, MO 63166
May 16, 2007 Offering UV and heat protection, LLumar® Axcess(TM) alleviates electronic signal interruptions caused by traditional metallic or ceramic window films. It will not interfere with GPS navigation, radios, keyless entry, remote start, cell phones, or tire pressure sensors. Available in variety of light transmissions, film offers glare reduction up to 90% and heat rejection up to 55%.

Excel Scientific Inc    Wrightwood, CA 92397
May 11, 2007 Available in non-sterile or sterile versions, AlumaSeal CS(TM) Films are formulated with adhesive designed to withstand long-term storage down to -80°C. Foils offer barrier properties to retard evaporation and include single non-perforated end tab. Measuring 82.6 x 132.6, including 9.5 mm end tab, AlumaSeal CS films are certified DNase-, RNase, and nucleic-acid-free.

Goodfellow Corp.    Oakdale, PA 15071
May 09, 2007 Used for capacitors, insulation, and PCBs, polyimide film features chemical structure that promotes hydrolytic stability and resistance to heat, radiation, and flammability. It also exhibits resistance to smoke emission, creep, and wear. While able to be used in aerospace applications, other areas of use include engine components, bearings, and mechanical parts exposed to radiation.

GE Company GE Plastics    Pittsfield, MA 01201
Apr 30, 2007 Intended for frozen and refrigerated food cases, ecomagination Lexan Constant Clear polycarbonate film can prevent condensation on doors without need to heat glass. Mar-resistant product features anti-fog coating, adheres to glass doors, and can be cleaned using standard products. Film can also help maintain integrity of glass and prevent spalling if internal pane of glass is broken. By printing on coated side of film, stores can add branding and advertising to display cases.

GE Company GE Plastics    Pittsfield, MA 01201
Apr 27, 2007 Able to be used to produce thin-wall parts, Lexan FST9705 helps contribute to fuel conservation through lighter weight, and features full flame/smoke/toxicity compliance, including OSU 55/55 heat-release performance. With molded-in color, resin enables bright whites, eliminating need for paint. Lexan FST can be injection-molded or used in profile extrusions. Applications include stow bin threshold trim, personal service units, and window reveals and bezels.

GE Company GE Plastics    Pittsfield, MA 01201
Apr 26, 2007 LNP Faradex compounds feature stainless steel fibers to provide intrinsic EMI shielding, avoiding need for separate vacuum metallization layer. Aside from helping manufacturers meet EMC regulatory requirements, product also helps curtail use of hazardous substances in electronics. Environmentally responsible LNP Faradex NS0031 grade, based on blend of polycarbonate and acrylonitrile-butadiene-styrene, provides flame retardance without use of brominated or chlorinated additives.

Owens Corning    Toledo, OH 43659
Apr 25, 2007 PerforMax® SP 798 chopped strand glass fiber reinforcement provides a heat resistant positive molding aid in computer and electronics applications. SP 798 helps to lower outgassing in combination with moldings using liquid crystal polymer and polyphenylene sulfide. Developed to withstand elevated temperatures associated with lead-free solder processes, product performs in temperatures exceeding 400°C.