Lincoln Electric Co. Inc., The    Cleveland, OH 44117
Jun 19, 2008 Suited for offshore, pressure vessel, shipbuilding, and structural fabrication industries, Lincolnweld® 888(TM) flux meets AWS H4 requirements for low diffusible hydrogen levels under 4 mL/100 g of weld metal. Designed for low alloy and mild steel as-welded and stress relieved applications, it can handle up to 5 welding arcs. Available in moisture resistant packaging, unit can remove slag from deep grooves and narrow gaps, and has cap-pass impact properties.

Composite Advantage    Dayton, OH 45420
Jun 18, 2008 FRP Pads and Mats offer corrosion resistant foundations and support surfaces that minimize amount of soil preparation required prior to starting development work. Providing portable access for heavy traffic or equipment to environmentally sensitive or challenging areas, lightweight, molded, and non-slip pads can be used as temporary roadways, helicopter landing pads, outrigger pads, trench plates, or supports for building relocation.

Pregis Corp.    Deerfield, IL 60015
Jun 13, 2008 Available in 1/32, 1/16, 3/32 in. sizes, Microguard(TM) low-density polypropylene (PP) sheet foam is optimized for cushioning and surface protection properties as well as vapor transmission, thermal, and insulation. Coefficient of friction provides protection for easily scratched finishes against vibration and shifting during transit. Recyclable and photodegradable, product has melt point of 320°F. No curing agents are used, so there is no grease transfer to parts it protects.

Air Products & Chemicals, Inc.    Allentown, PA 18195
Jun 13, 2008 Designed for waterborne coating and ink applications, ZetaSperse® low-VOC and APE-free additives combat viscosity build, color drift, flocculation, and other challenges to provide dispersion stability. Solutions are available for problematic pigments such as metal salt reds and other organic pigment types; carbon black pigments; quinacridone, perylene, and similar pigment chemistries; as well as DPP, azo, and phthalocyanine pigment chemistries.

PPG TrueFinish (R) Industrial Coatings    Pittsburgh, PA 15272
Jun 12, 2008 Formulated for hastened cure without accelerator, Spectracron 390 UV is recommended for use on pretreated or primed metal surfaces. This 2-component, high-solids, exterior-grade solution offers optimal exterior color and gloss as well retention as well as mar and chemical resistance when catalyzed with Q3501 or GXH1086 exterior catalysts. Offered in various glosses and colors, Pb- and chrome-free product has blended VOC of less than or equal to 3.5 lb/gal max.

Bishop-Wisecarver Corporation    Pittsburg, CA 94565 0209
Jun 12, 2008 Designed to fit 40 mm series structural aluminum extrusion, Quicktrak® allows trouble-free mounting of signature DualVee® Track. Design creates solid interface between beam, clamp, and DualVee track, retaining components in state of compression, which significantly increases joint rigidity. DualVee track is available in carbon and SS, hardened or unhardened, and in single lengths up to 22 ft. Plating options are also available.

GrayGlass    Queens Village, NY 11429
Jun 06, 2008 Made possible by precision CNC machining and water jet cutting capabilities, Patterned Glass is available in clear soda lime, low iron, and borosilicate from over 90 different styles and can be tempered or laminated for safety glazing. Decorative glass styles include clear, opaque, etched, colored, and mirror. Customizable for all engineering specifications, all glass styles are available for cutting and sizing, hole drilling, polishing, laminating, etching, and UV bonding.

Belmont Metals, Inc.    Brooklyn, NY 11207
Jun 04, 2008 Flexible with regards to formulas and quantities, pure metals and alloys can be provided in custom shapes and sizes to meet casting, plating, brazing, soldering, and other application requirements. In addition to standard nickel shapes, service deals with powders and shapes for Dipolarized Ni Anodes, Ni Cathodes, Low Melting Foundry Shot, as well as Ni-Copper and Cupro Nickel in standard and special compositions. Monel® (Nickel-Copper alloy) and Nickel-Silver are also available.

Igus, Inc.    East Providence, RI 02914 0349
Jun 04, 2008 Self-lubricating iglide® R and iglide J are semi-finished products that can be used in any machined part. Anything machined from these 2 in. dia solid rods will possess material qualities such as resistance to dirt, dust, wear, and friction. Materials consist of complementary polymers, reinforcing fibers, and solid lubricants that help optimize material properties. When used as bearing, machined plastic parts will have predictable life span.

SoluLinK    San Diego, CA 92121
Jun 02, 2008 Providing magnetic response time of 1-2 min, NanoLink(TM) Streptavidin Magnetic Microspheres are suited for high throughput robotic applications where high biotin loads must be removed or immobilized without presence of iron leachate. Sub-micron encapsulated particles offer free-biotin binding capacity greater than 12 nmol/mg, biotin-oligonucleotide binding capacity greater than 2.5 nmol/mg, and biotin-IgG binding capacity greater than 1.7 nmol/mg.

3M Company / Electronic Products Division    Austin, TX 78769
May 29, 2008 Able to work with tape shield, UniShield(TM), wire shield, and longitudinally corrugated cable, 3M Cold Shrink Splice Kit QS-III 5545A provides everything necessary for splicing 46 kV solid dielectric power cables with conductor sizes from 4/0 AWG to 1,000 kcmil. Splice can be used with standard copper or aluminum inline compression (crimp type) connectors. While cold shrink splice body is one-piece molded design made of silicone rubbers, cold shrink jacketing is made of EPDM rubber.

Wacker Chemical Corp.    Adrian, MI 49221
May 23, 2008 Engineered to ISO 9001 quality standards, SILPURAN® silicone rubber has no organic stabilizers, plasticizers, or promoters for optimal purity. It is tested for biocompatibility compliance to ISO 10993 and USP-Class VI standards and is manufactured and processed in clean room Class 6 area. Uses include production of seals for contact with skin, blood, plasma, or dialysis fluid; medical tubing, catheters, and profiles; as well as gaskets, membranes, and needle-free valves.

Excel Scientific Inc    Wrightwood, CA 92397
May 22, 2008 Used with white clear-bottom microplates, BrightMax(TM) Adhesive White Vinyl Films help to maximize signals in luminescence assays. Split backing facilitates application of film to either top or bottom of plate. Applied to bottom of 96-well filter plate, film provides medium for holding dried filters removed from plate for microscopic examination and storage.

Bayer MaterialScience, LLC - Coatings, Adhesives & Sealants    Pittsburgh, PA 15205
May 22, 2008 Polyurethane raw materials can be used to formulate self-healing coatings that are scratch- and chemical-resistant, fast-curing, and meet VOC regulations, such as high solids and waterborne coatings. Offering high reactivity and full crosslinking even at low-temperature curing, 2-component polyurethane coatings include hydrogen bonds that allow for thermoplastic flow to relieve stress and allow self-healing of defects.

Zotefoams Inc.    Walton, KY 41094
May 20, 2008 Manufactured from ultra-pure Kynar PVDF polymer in process that uses only inert nitrogen gas to expand polymer sheet, ZOTEK® F Foams are in lowest risk category for out-gassing of VOCs and ammonia. Polymer resins are recognized by semiconductor, biotech, and medical industries as having very low extractables that migrate from resin matrix, as well as optimal flammability properties and resistance to chemicals and UV light.

Rino Industries Ltd.    Chesterfield S41 9RN  United Kingdom
May 19, 2008 With aluminium body and black oxide finishing on exposed surfaces, Rino Roller Bearing Pillow Blocks offer corrosion resistance and are fully adjustable to allow radial clearance. Single units are self-aligning. Features include interchangeability, shaft protection, low friction properties, lithium based grease lubrication, and 60-250ºF operating temperatures.

SABIC Innovative Plastics    Pittsfield, MA 01201
May 19, 2008 Suited for manufacturing electronic ID cards and security documents, Lexan(TM) SD polycarbonate film grades use heat and pressure to join all layers into card that cannot be pulled apart. Lexan SD8B14 film, designed for clear overlays or intermediate layers, offers gauges from 50-400 µm; Lexan SD8B24 bright white film, used for core layers, offers gauges from 75-620 µm; and Lexan SD8B94 clear, laser-markable layer, used as top or middle layer, offers gauges of 50, 100, and 150 µm.

Five Star Technologies Ltd.    Cleveland, OH 44142
May 19, 2008 Optimized for conductivity and printability, ElectroSperse(TM) P-series silver-based conductor pastes are designed for use on low-temperature plastic substrates and targeted for use in touch screen sensors. Uniform dispersion of silver, with tightly controlled particle size distribution, enables direct printing of features as small as 50 µm with precision and consistency. Films adhere to flexible media, including ITO (Indium Tin Oxide)-coated polyester.

Metallized Carbon Corp.    Ossining, NY 10562
May 16, 2008 Metcar grades M-199 and M-201 high-temperature mechanical materials are designed to function without lubrication in dry and dust-prone environments. Able to operate in temperatures between 400-750ºF, they have high electrical conductivity, high load capacity and wear resistance, are homogenous, and provide continuous lubrication. Bearings manufactured from materials are self-lubricating, non-galling, dimensionally stable, and have high compressive strength.

TT electronics IRC Wirewound and Film Technologies Division    Boone, NC 28607
May 16, 2008 Consisting of thermally conductive aluminum alloy substrate with thermally conductive glass dielectric material, Anotherm® Plus withstands high voltages, and enables increased light output for LEDs. Anodized aluminum material provides thermal transfer for LED assemblies that are mounted directly onto substrates. Applications include vending machines, outdoor signage and display, aquarium lighting, emergency vehicle lighting, as well as architectural and general lighting.