Boise Inc.    Bensenville, IL 60106
Aug 19, 2009 Key benefits of Boise® Block(TM) include PFOA free, consistent quality for efficient runnability, flexographic print surface, and FDA-approval for direct food contact. Boise BLOCK 5, with moderate level of oil and grease hold out, is suited for packaging sandwich, hamburger, and taco wraps, as well as basket liners and take out bags. With high oil and grease hold out capability, Boise BLOCK 7 suits french fry pouches, hash brown pouches, clamshell liners, and high grease sandwich applications.

Schaeffler Group USA, Inc.    Fort Mill, SC 29715
Aug 17, 2009 Based on consistent refinement of high-grade NIROSteels, Cronitect® high-grade martensitic hardening steel provides corrosion resistance under extreme operating conditions, including dry running applications or when bearings come into contact with aggressive media such as water, salt spray, acids, and cleaning chemicals. Heat treatment process optimizes properties of base material, producing hard, wear-resistant surface zone with high corrosion-resistance and tough core.

Cox Sales Co.    Roanoke, VA 24016
Aug 17, 2009 Used for bindery operation, Blackjack Quick-dry Padding Adhesive suits printers who require accelerated cure times or want to apply just one coat of adhesive. Soft tear solution, characterized with optimal solids content and minimal water is recommended for many types of paper, from cardboard to tissue. White solution dries clear and is suited for tabbing, bookbinding, and interleaving carbon.

Tempil, Inc.    South Plainfield, NJ 07080
Aug 07, 2009 Lot numbered for NIST traceability, Tempilstik° indicators make marks that melt within 1% of their rated temperatures. They are supplied in adjustable aluminum holder with pocket clip and come in 100+ temperature ratings systematically spaced between 100 and 2,500°F. Below its temperature rating, products leave dry, opaque chalk mark. When rating is reached, a liquid smear remains. Upon cooling, melted mark will solidify with transparent or translucent appearance.

Quadrant Engineering Plastic Products Inc.    Reading, PA 19612-4235
Aug 05, 2009 Fluorosint® HPV offers optimized bearing performance (PV) that results in parts that can withstand higher loads and velocities, while its wear resistance (K factor) lends to extended wear life. Combining higher temperature resistance with low de-formation and low coefficient of linear thermal expansion, extreme grade of Fluorosint MT-01 provides engineers with design options for instances where compliance of PTFE needs to be balanced with precise control.

Pacor Inc.    Cinnaminson, NJ 08077
Aug 03, 2009 Designed for facilitated installation, UltraGard(TM) precut aerogel insulation cuts energy loss and extends pipe rack efficiencies in piping systems used in chemical and hydrocarbon processing operations. Construction consists of silica solids derived from gel in which liquid component has been replaced with gas and reinforced with nonwoven, glass fiber batting. Environmentally safe, hydrophobic product is offered in 5 or 10 mm thicknesses; 1½, 2, and 3 in. widths; and 59½ in. length.

Bayer MaterialScience, LLC - Coatings, Adhesives & Sealants    Pittsburgh, PA 15205
Jul 30, 2009 Providing identification security, Makrofol® ID ProteXXion contains tiny metallic identification particles, which are distributed stochastically and can be arranged in customized patterns. Metal particles, which measure around 1/10 of a millimeter, can also be provided with alphanumeric information, logos, pictograms, and national emblems. Available in standard thickness of 100 µm, film is suited for IDs, passports, drivers' licenses, brand protection, and labeling.

Henkel Corp.    Madison Heights, MI 48071
Jul 30, 2009 Formulated for electrical, thermal, and mechanical assembly applications, Emerson & Cuming® CF3366(TM) delivers optimized adhesion at both room and elevated temperatures, offers electrical conductivity, and provides for uniform and void-free bondlines. Product also offers low-temperature, quick cure capabilities and ensures reliable RF ground plane performance, even in extreme environmental conditions.

Henkel Corporation    Rocky Hill, CT 06067
Jul 30, 2009 No-clean, halide-free Multicore® TFN700B(TM) is Newtonian-based, and, therefore, eliminates shearing conditions associated with traditional tacky flux formulations, delivering flux transfer consistency and compensating for varied process conditions. Non-hydroscopic and non-corrosive, product has built-in blue color system that enables optical recognition of flux by pick-and-place systems, allowing visual verification of flux volume before placement on top component of POP package.

Lanxess - Technical Rubber Products    Pittsburgh, PA 15275
Jul 30, 2009 Krynac M 3340 VP grade of synthetic nitril rubber features polymer additive Mesamoll, which is alkane sulfonic acid ester of phenol that offers low volatility and compatibility with nitrile rubber. Mesamoll is classified as neutral in terms of physiological and toxicological makeup. Grade, suitable for contact with food, is resistant to oil and grease.

FLEXcon    Spencer, MA 01562
Jul 29, 2009 Available in 12 in. x 2,500 ft pre-slit rolls and 12 x 18 in. sheets, 8 DigiPRO® pressure-sensitive films feature topcoat designed for use with digital offset printing presses. Products are offered with DPM CVE (Clear Velvet Embossed) or DPM UVCG (UV Clear Gloss) overlaminates for applications requiring durability and fade resistance. Comprised of 2 vinyls and 6 polyesters, films are suited for small-format digital printing with HP Indigo inks.

Pacor Inc.    Cinnaminson, NJ 08077
Jul 27, 2009 Available for high temperature and cryogenic environments, UltraGard(TM) Precut Aerogel Insulation is hydrophobic and can be used effectively in tight access areas. Aerogels consist of lightweight silica solids derived from gel in which liquid component has been replaced with gas, and reinforced with nonwoven, glass fiber batting. Environmentally safe insulation is available in 5 and 10 mm thicknesses, nominal length of 59½ in., and widths of 1½, 2, and 3 in.

Hexis USA LLC    Corona, CA 92880
Jul 24, 2009 Designed for direct application onto brick, concrete, or plaster walls, VCSR100WG1 is made of conformable 2 Mil vinyl and carries high tack adhesive to ensure adhesion on irregular surfaces. Film can be used with or without laminate and comes in rolls 54 in. wide and 148 ft long. Product is suitable for solvent and eco-solvent inkjet printers.

Pro-Link, Inc    Canton, MA 02021
Jul 24, 2009 Mega-Loop 12 in. microfiber system cleans floors, or can be used to clean tabletops, desks, counters, and other surfaces by attaching to Velcro hand holder. System is suited for cleaning cafeteria floors, classrooms, and variety of other areas and counter surfaces. Optional 2 gal charging system helps to reduce chemical waste and ensure effective cleaning.

Perlast Ltd    San Jose, CA 95110
Jul 14, 2009 Designed for CVD, PECVD, and PVD vacuum deposition processes, V75SC offers low particulation in critical sealing applications. It has high fluorine content which provides thermal resistance up to 250°C, combined with high levels of plasma and chemical resistance. Material can be used for O-rings and formed seals in static and dynamic applications including door seals, slit valve seals, lip seals, and check valves and pumps. Product is available in sizes up to 100 in. dia.

United Case, a UFP Technologies brand    Kissimmee, FL 34744
Jul 08, 2009 Designed for Pelican(TM) Product's 0450 Mobile Tool Chest, Case Fit(TM) Drawer Liner Kits include 6 shallow drawer foam sets containing ¾ in. thick black foam with pressure sensitive adhesive and ¼ in. thick foam. Deep drawer set contains 2 pieces of 7/8 in. thick black foam with pressure sensitive adhesive and ¼ in. foam. Case Fit DL 45 is made of closed-cell, oil repellent, cross-linked polyethylene foam, while Case Fit DL PE is made of non-cross-linked polyethylene foam.

Creative Materials Inc.    Ayer, MA 01432
Jul 03, 2009 Optimized for flow and print quality, Type 125-17 has translucent, sky-blue color and is used as protective insulating layer as well as crossover layer for polymer thick-film conductive inks in printed circuit applications. Flexible and UV-curable coating, compatible with range of substrates, is resistant to humidity, temperature fluctuations, and solvents. Low-odor solution delivers printed, void-free coating designed for use with various conductive silver and carbon inks.

Novellus Systems, Inc.    San Jose, CA 95134
Jul 01, 2009 Promoting reliability over porous alternatives, Dense ultra low dielectric constant (ULK) films are deposited using single precursor and do not require strict queue-time control. Ultra-violet thermal processing (UVTP) increases mechanical strength through cross-linking of bonds, and vertically etched structures can be obtained when patterning due to chemical homogeneity throughout layer. Patterning capability translates into optimized breakdown voltage and minimized leakage currents.

Wacker Chemical Corp.    Chino, CA 91710
Jun 30, 2009 ELASTOSIL® Solar 2120 UV encapsulant is UV-activated silicone elastomer that cures at room temperature without any additional heat. Compound contains no photoinitiators, is electrically insulating, and has hardness of 40 Shore 00. Pourable ELASTOSIL® Solar 3210 is 2-part rubber with optimized light permeability and does not shrink, with hardness of 45 Shore. Products are suited for bonding, sealing, laminating, and encapsulating photovoltaic modules and their electronic components.

Sealed Air Corp.    Saddle Brook, NJ 07663-5291
Jun 29, 2009 Custom-designed to accommodate exact size and shape of product, Instapak® TempGuard(TM) coolers use polyurethane foam to keep temperature-sensitive products safe during shipment. Cavities can be customized to fit right amount of gel refrigerant or dry ice, lending to weight reduction, while ability to keep products colder for extended periods lets companies choose more cost-effective shipping options. Cooler is reusable, since foam is not fused to corrugated shipping container.