NewPage Corp.    Dayton, OH 45463
Feb 09, 2010 Designed for printing pressure sensitive labels, OptiPrime(TM) Digital is pre-optimized, allowing converters to skip digital print surface pretreatments. Product features smooth semi-gloss finish and high strength for die-cutting and matrix stripping during label converting. OptiPrime Digital is available as tri-certified grade, indicating chain-of-custody certification by three third-party organizations including FSC, SFI, and PEFC schemes.

Solutia, Inc.    Saint Louis, MO 63166
Feb 04, 2010 Suited for use where interior glass is inaccessible or concern about excessive thermal stress exists, Vista(TM) Exterior Film Series minimizes heat build-up by rejecting up to 83% of solar energy. Non-stick hardcoat, designed to extend product life, is scratch resistant and also facilitates window cleaning, as dirt and other pollutants wash away with water.

NewPage Corp.    Dayton, OH 45463
Feb 03, 2010 Available in 70, 75, and 80 gsm basis weights, EcoPoint(TM) Plus features 10% post-consumer waste recycled fiber with bright white print surface for optimal artwork reproduction in offset and rotogravure printing. Product is suitable for high-speed converting and labeling processes and features reverse-side coatings that are engineered for hot-melt adhesives. EcoPoint Plus is third-party chain-of-custody certified to FSC®, SFI®, and PEFC schemes.

Belmont Metals, Inc.    Brooklyn, NY 11207
Jan 28, 2010 Available in standard and custom variations, line of Pewter Alloys includes lead-free formulas, Britannia, and genuine pewter. Tin-base and lead-base pewter alloys are also available for centrifugal spin casting, rubber mold casting, gravity pour and slush castings. For sculpture, jewelry, and arts and crafts, alloys are available in circles, discs, sheets, ingots, wire, and special shapes. Finishes include mechanical, chemical, organic, and electroplated.

Advanced Composites Group    Tulsa, OK 74134
Jan 27, 2010 Compatible with LTM® epoxy and HTM® Bismaleimide prepregs, Model CB1100 ceramic tooling block can produce thermally stable composite tooling tolerant of high pressures and elevated temperatures associated with autoclave cure cycles. High-grade product features low coefficient of thermal expansion; does not absorb water, eliminating need for drying or venting of tool; and is incombustible. It is suited for production of high-accuracy, short run, and prototype tooling.

Pecora Corp.    Harleysville, PA 19438
Jan 25, 2010 Providing joint movement of ±50%, 890FTS-TXTR Silicone Sealant gives architects and builders option to create variety of silicone colors at job site with mortar-like appearance. With 3-minute mix, contractors can create correct amount of silicone sealant, eliminating problems of ordering too much or too little silicone for project.

Goodfellow Corp.    Oakdale, PA 15071
Jan 22, 2010 Available as machinable rods and plates in range of sizes, as well as finished machined components, SHAPAL(TM)-M soft can be machined into complex shapes using carbide tools. Ceramic is valued in wide range of applications, particularly in vacuum and nuclear industries, where zero porosity, ability to seal under vacuum, and low thermal expansion are important. SHAPAL(TM)-M soft is also suited for heat sinks, electronically insulating components, and crucibles for vacuum deposition.

Sekisui TA Industries, LLC    Brea, CA 92821
Jan 21, 2010 Available in 2 versions, SOPRA shrink films add protection to retail packages while enhancing their appearance. SOPRA LV multipurpose polyolefin multilayer shrink film, able to work on variety of equipment, is formulated formulated to provide a premium appearance and soft, gentle feel to wide variety of retail packages. For high-speed automatic applications, SOPRA SP is formulated as polypropylene-based, multilayer shrink film.

Simrit, A Div. Of Freudenberg-NOK    Plymouth, MI 48170
Jan 12, 2010 Used in high-performance, high-pressure jet fuel systems, F273 material for aerospace industry is resistant to jet fuels and synthetic turbine lubricants. Product is designed for typical application temperature range from -70 to +200°C.

Teknor Apex Co.    Pawtucket, RI 02861
Jan 07, 2010 As alternative to powder blends and plastisols, Tek-Spheres(TM) provide automotive instrument panel, airbag cover, and interior trim manufacturers with molded-in color and tactile properties. Vinyl, 0.004 in. dia microbeads, produced in Shore A durometers from 55-90, flow freely over inside of hollow molds in processes such as slush molding and rotomolding. Completely homogeneous material melts rapidly in contact with heated mold, resulting in uniform dispersion of color and additives.

Henkel Corporation    Rocky Hill, CT 06067
Jan 07, 2010 Designed specifically for automotive and transport industries, Terophon HDF High Damping Foam is capable of quickly damping noise-producing vibrations and can be installed in various parts of vehicle. In addition to optimizing acoustic driving comfort, product can minimize weight of car as well as consumption of materials such as bitumen. Terophon is supplied as granules with durability of 6 months and is applied by means of direct extrusion.

Elastocon TPE Technologies, Inc.    Rochester, IL 62563
Jan 06, 2010 Offering rugged performance and durability, STK40 Series thermoplastic elastomer (TPE) overmolds onto acrylic resins such as Lustran, Plexiglas, Perspec, Acrylite, and Polycast. It seals against weather and moisture and features 40 Shore A softness. Available in black or natural, SEBS-based TPE can be supplied in 1,000 lb or less quantities for compounding or as ready-to-use pellets. It can be used on lights, street signs, and button gaskets for protective or decorate purposes.

ITW Muller    Arlington Heights, IL 60004
Dec 31, 2009 Logo Wrap(TM) offers method for automatically applying 4-sided brand identification to pallet of product as part of stretch wrapping process. Custom-printed with company name/logo, film can be applied to identify stretch wrapped loads and their origins, provide extra advertising, as well as supply contact information or storage and transportation instructions. Dispenser can be integrated into new/existing Muller Octopus(TM) stretch wrapping machines.

Yellow Jacket LLP    Marion, IN 46952
Dec 31, 2009 Designed for use with Yellow Jacket machines, Jacket Wrap(TM) secures palletized loads on forks of forklift. Load retention and holding capabilities are suited for stabilizing odd-shaped loads, and functionality is further enhanced via puncture and tear resistance as well as cling properties.

Saint-Gobain Performance Plastics    Garden Grove, CA 92841
Dec 22, 2009 CHEMFAB XPS line of coated fabrics utilize specialty formulated resin blend to provide good release properties and chemical resistance, as well as high crease resistance, flex fatigue resistance, and conformability. Applications include release sheets and conveyor belting in textile, chemical, and industrial processing, packaging, and composite molding.

Ticona Engineering Polymers    Florence, KY 41042
Dec 17, 2009 Hostaform MT® 8U05 is UV-detectable acetal copolymer contains additive that allows inspection of components with UV light, which can help improve quality control in production of complex medical devices. Sterilizable, biocompatible grade offers resistance to chemicalsand corrosion and is also resistant to slip and friction. It complies with requirements of U.S. FDA and of European Union relative to food compatibility.

Advanced Polymer, Inc.    Carlstadt, NJ 07072
Dec 16, 2009 Suited for autocare and surface protection products, APW-319, a low turbidity, cationic microemulsion of pure carnauba wax can be used on variety of substrates including textile, leather, metal, wood, and painted surfaces to impart gloss, slip, and resistance to dirt pick up. Product does not contain ethylene glycol or alkylphenol ethoxylates, and produces thin, uniform film of wax when used in spray detail waxes or automotive wash/wax systems.

Chem Polymer Corp.    Fort Myers, FL 33911
Dec 11, 2009 Chemlon 217 GI is 17% glass fiber-reinforced nylon 6 compound with levels of stiffness, flexural strength, and tensile strength suitable for injection molded applications that undergo challenging dynamic forces. Impact-modified and UV-stabilized, it suitable for outdoor and low-temperature environments. Compound can be used in applications such as office chairs, outdoor power equipment, outboard motor covers, and gun stock components.

Pregis Corp.    Deerfield, IL 60015
Dec 09, 2009 Available in 48 in. width and 3 in. thickness, PolyPlank® EXT single cross section, polyethylene foam plank is produced via extrusion process, which creates homogeneous foam product with dimensional stability. Closed-cell structure makes it buoyant, virtually impermeable to water, and resistant to water vapor transmission. Available in 1.7 or 2.2 lb densities, product can be die cut, heat-sealed, welded, glued, saw cut, split, skived, water jet cut, routed, and drilled to specifications.

Creative Materials Inc.    Ayer, MA 01432
Dec 07, 2009 Formulated to be screen printed, 125-19 High Temperature Ink can be used with Kapton®, Teflon®, and rubber surfaces as well as ceramic, glass, and silicone substrates. Environmentally friendly product can also be syringe-dispensed, dipped, and sprayed. Providing electrical insulation and resistance to water, ink is produced as smooth paste suited for EMI/RFID shielding, polymer thick film circuitry, and electrical attachments for stress-sensitive devices.