VAST Enterprises, LLC    Minneapolis, MN 55418
Feb 03, 2011 Manufactured in engineered composite of post-consumer recycled rubber and plastics, VAST Composite Detail Pavers facilitate and accelerate installation of curves and other paver patterns in walkways, building entryways, courtyards, terraces, and patios. They are 100% recyclable and designed to compliment 4 x 8 in. Composite Landscape and Permeable Pavers as well as 16 x 16 in. Installation Grids.

Creative Materials Inc.    Ayer, MA 01432
Feb 03, 2011 Pressure sensitive, double-sided tapes and adhesive-transfer films are available in thicknesses from 0.002-0.010 in. Anisotropically conductive products are resistant to temperature extremes, humidity, and direct exposure to sunlight. Double-sided, pressure sensitive tape No. 300-01 is 0.009 in. thick and conductive on one side. Metal foil support film transmits electricity down length of tape, while acrylic PSA system is heat-resistant to over 100°C.

Surface Guard, Inc.    Aurora, IL 60504
Jan 26, 2011 Surface Guard® 135 series provides temporary protection of textured or semi-matte finished metals and plastics. Coated with water-based acrylic adhesive system, polyolefin film adheres to surface, exhibits low adhesion build over time, and can be removed when protection is no longer required. Products are supplied on 1.5 mil Linear Low Density or 2.5 mil Low Density PE films; clear and tinted films are also available. Widths from 1-80 in. and roll lengths to 15,000 ft are available.

TenCate Advanced Composites USA, Inc.    Morgan Hill, CA 95037
Jan 25, 2011 Designed for out of autoclave vacuum cure composite structure, TC235SF addresses industry needs by providing low porosity, optimized surface appearance, and capability to self level under low cure pressures. Film provides cosmetically smooth appearance over thin skinned honeycomb core stiffened composites as well as solid laminates. Co-curable with 250 or 350°F prepregs, product maintains integrity over tight radiuses and is available in widths of 12-50 in.

Honeywell International, Inc.    Morristown, NJ 07960
Jan 21, 2011 Designed to meet NIJ.06 ballistic vest certification standard, Spectra Shield® II SA 4144 helps keep military and law enforcement personnel safe against variety of threats, including military-grade pistol rounds and fragments. Material incorporates Spectra® fiber, which is made from ultra-high molecular weight polyethylene using gel-spinning process. Material can reduce weight of personal armor systems by as much as 30%, optimizing mobility in dangerous situations.

Panolam Industries    Albany, OR 97321
Jan 20, 2011 Providing continuous color to edges of finished product, MelCor II laminate is comprised of multiple pigmented core paper layers impregnated into flexible thermoset resin at pressures exceeding 1,000 lb/in.² and temperatures approaching 300°F. Designers can thus incorporate beveled, wood, smoothed, or pinstriped edge into their products, while routers, engravers, or sandblasting equipment can be used to etch grooves, bands, or other patterns without compromising material's color.

AGY    Aiken, SC 29801
Jan 06, 2011 Initially available on DE75 yarn, 947 direct sizing system for E-Glass yarns provides aerospace customers with opportunities to remove weight from traditional composite products while increasing tensile and compressive strengths. Fibers with 947 sizing can be woven into fabric and used in composite applications without additional finishing, eliminating related fabric integrity erosion. Currently, 947 sizing is compatible with epoxy and phenolic resins as well as thermoplastics.

CertainTeed Corp.    Valley Forge, PA 19482-0860
Dec 22, 2010 Diamondback(TM) Tile Backer is reinforced with embedded glass mats for strength and moisture and mold resistance. It features polymer coating with textured surface that creates strong bond, helping to avoid tile slippage during installation. Eliminating need for moisture barrier, product can be used in bathrooms, kitchens, and other high-moisture residential and commercial interiors. Diamondback Tile Backer Type X is UL classified for fire resistance.

SoloPower, Inc.    San Jose, CA 95138
Dec 20, 2010 Measuring 0.88 x 3.05 m and weighing 15 lb, Model SFX3 thin film CIGS module is able to produce up to 260 W of electricity. With efficiency up to 12.1%, flexible CIGS module is IEC 61646 and IEC 61730 certified and holds ETL Mark certification to UL 1703 standard.

Applied Plastics Co.    Norwood, MA 02062
Dec 17, 2010 Capable of 500°F continuous and 600°F intermittent use, APC Teflon®-Coated Nichrome Wire provides non-stick surface in variety of plastics and packaging processing applications. Product will outlast plain nichrome resistance wire and prevent melted plastic from building. Supplied on spools in standard 0.018, 0.020, and 0.036 in. sizes, wire is additionally suited for sealing, shrink wrapping, plastic sheet and styrofoam cutting, and acrylics bending equipment.

Surface Guard, Inc.    Aurora, IL 60504
Dec 17, 2010 Used during processing, assembly, and shipping, Surface Guard® 73 provides temporary protection of complex - textured, rugged, coarse - surfaces. Combination of polyethylene film coated with blend of aqueous adhesives results in masking that is soft and aggressive, while chemistry provides high tack and medium-high peel. Properties also ensure clean removal when protection is no longer needed. Film comes in widths from 1-80 in. and lengths to 15,000 ft.

Federal-Mogul Corp.    Southfield, MI 48034
Dec 15, 2010 Meeting durability demands of engine downsizing and alternative or high-octane blended fuels, Lean Tool Steel Powder Metal increases chromium in mix, adding carbides to alloy to create multiple-phase composite microstructure. Resulting material is machinable and wear resistant. Hard phases measure over 1000HV50 on Vickers scale, while softer matrix promotes tool life. Suitable for aluminum and cast iron cylinder heads, material is compatible with gasoline, ethanol, diesel, and biodiesel blends.

Teknor Apex Co.    Pawtucket, RI 02861
Dec 14, 2010 Available in compounds and masterbatches, Thermoplastic Starch and Polypropylene Blends provide physical properties comparable to virgin PP. Terraloy® BP-13020 ready-to-process compounds are blends of 25-30% TPS and 70-75% PP, of which 70-75% is recyclate. Terraloy® MB-13020 masterbatches have 35-50% TPS content and up to 50% recyclate. Both are suited for injection molded consumer products; extruded sheet, profiles, and tubing; and blow molded jars and bottles.

Surface Guard, Inc.    Aurora, IL 60504
Dec 10, 2010 Surface Guard® 123 series provides temporary protection for variety of surfaces, including smooth and lightly textured types, during processing, assembly, and shipping. Polyolefin film is coated with blend of aqueous adhesives, and its properties enable hybrid masking capable of handling water/condensation, heat, and high surface energy. Typically supplied on 1.5-3 mil PE films, with clear and tinted films available, product comes in lengths to 15,000 ft and widths from 1-80 in.

ACPO, Ltd.    Oak Harbor, OH 43449
Dec 03, 2010 Resistant to acids, chemicals, and oil, N21010 consists of 1.0 mil Clear BOPP non-topcoated face combined with emulsion acrylic overlaminating adhesive and .92 mil polyester release liner. Aesthetics eliminate concern for fish eyes and deliver optimal wet out, while adhesive is engineered for short term re-positionability and ultimate adhesion to variety of substrates. Product is suited for use in booklet applications as well as dark and metalized substrates.

Innovative Polymers, Inc.    St. Johns, MI 48879
Nov 29, 2010 Polyester polyol-based polyurethanes of HP-1000 Series are Shore A hardness systems with 1:2 resin to hardener mix ratios and gel times under 25 min at room temperature. Elongations range from 660%-800%, and tear strengths are rated up to 325 pli. Polyether/polyurea polyol hybrids of HP-2100 Series, which include 3 Shore A systems and one Shore D material, exhibit abrasion resistance with as low as 3 mg loss. Elongations vary from 280%-990%, and tear strength ratings are up to 643 pli.

Pregis Corp.    Deerfield, IL 60015
Nov 23, 2010 Made from kraft paper (linerboard) and water-based adhesives, NaturePlank(TM) offers brand owners and fabricators paper-based protective packaging alternative. Strength and blocking/bracing properties suit range of applications and provide all-natural alternative to petroleum-based plastic plank products. Made with SFI®-certified, renewable virgin and post-consumer recycled fibers, planks measure 108 x 48 x 1 or 2 in. and can be converted into desired shape for application.

Creative Materials Inc.    Ayer, MA 01432
Nov 23, 2010 Available as 2-component system, 125-26A/B119-44 adheres to variety of substrates, including ITO-coated surfaces and other low surface-energy substrates. Electrically conductive product is resistant to scratching and creasing and is capable of screen printing circuits with fine-line widths and spaces as small as 50-75 microns. With minimal sensitivity to handling, abrasion, and solvents, RoHS-compliant ink is suited for touch screens, solar cell circuits, and RFID applications.

Transilwrap Co., Inc.    Franklin Park, IL 60131
Nov 22, 2010 Printed on surface using UV litho, screen, or digital print processes, Recyclable Clear Polypropylene creates eye-catching 3-D visuals for point-of-purchase, packaging, signage, publishing inserts, direct mail, cards, and other printed material, boosting impact of message. Promotions containing dimensional graphics are effective in grabbing viewer's attention and reinforcing brand recognition. Available in 2 sheet sizes, product can be trimmed, cut, and glued.

Outokumpu Technology, Inc.    Jacksonville, FL 32216
Nov 22, 2010 Containing 85% recycled content, 100% recyclable LDX 2404® has PRE value that indicates optimal corrosion resistance. It does not require any hazardous coatings and can withstand salty atmospheric conditions. Properties also help reduce weight of structures and lower energy consumption in transport and construction. Potential applications include bulk liquid storage tanks, road and rail tankers, pulp and paper machinery, and water treatment facilities.