Materials & Material Processing ->
(Showing headlines 21 - 40) << 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 ...
Ceramic Resonator VCO targets backhaul radio market.
San Diego, CA 92126
Apr 22, 2013
Operating from 4,384–4,386 MHz with tuning voltage range of 1–4 Vdc, Model CRO4385A-LF features phase noise of -108 dBc/Hz at 10 kHz offset with typical tuning sensitivity of 15 MHz/V. Device delivers typical output power of 3 dBm at 5 Vdc supply while drawing 21 mA over temperature range of -40 to 85°C. Housed in 0.5 x 0.5 x 0.22 in. MINI-16 package, voltage controlled oscillator features typical second harmonic suppression of -10 dBc.
Sheeting and Coils incorporate copper, Lexan, and aluminum.
Vernon, CA 90058
Apr 19, 2013
Offered as siding and decorative metal solution, 4EverBright combines colored real pure copper with lightweight aluminum construction and protective properties of Lexan polycarbonate resin thermoplastic. Layer of Lexan® polycarbonate resin thermoplastic prevents exposure to humidity and air, preventing pure amber hue from ever fading or tarnishing, and also protects copper against scratches and dents. Sheet comes in various thicknesses, including .040, which is traditional to roofing.
Ceramic Substrates support SMT soldering and die attach.
Norwood, MA 02062
Apr 18, 2013
Consisting of electroless nickel and immersion gold plating over thick film silver, AgENIG® Substrates eliminate solder leaching, enable processing up to 260°C or higher, assure optimal solder connections, and allow multiple SMT reflow solder cycles as well as touch-up and repairs. Addition of thin layer of Palladium plating also allows welding, gold wire bonding, and eutectic die attach. In addition, products based on metallization process can be used up to 170°C continuous operating temperature.
Fluoroelastomers suit electrical submersible pump bladders.
Agc Chemicals Americas, Inc.
Charlotte, NC 28217
Apr 18, 2013
Classified by ASTM D 1418-01 as FEPM, AFLAS® 100 Series comprises fluoroelastomers for electrical submersible pump bladders and polymeric products used in extreme downhole environments. Compounds based on AFLAS 100 series can withstand temperature, pressure, and corrosive elements. These copolymers of tetrafluoroethylene and propylene impart flexibility, toughness, and resistance to chemicals, heat, and steam. Mechanical properties do not deteriorate, even upon prolonged exposure to 392°F.
Tack Cloths address range of surface preparation needs.
DeVilbiss Automotive Refinishing
Swanton, OH 43558
Apr 16, 2013
DeVilbiss CLEAN™ Cotton Tack Wipes, made from soft cotton mesh, feature all-purpose medium tack, while Poly Tack Wipes are dry tack and manufactured from soft polyester. Both products are compatible with all paints and are wax- and silicone-free. Engineered to not leave any residue, cloths can be used to remove dirt, lint, dust and sanding particulates from surfaces.
Submerged Arc Flux suits offshore welding applications.
Lincoln Electric Co. Inc., The
Cleveland, OH 44117
Apr 15, 2013
Accommodating applications requiring high strength after extensive post-weld heat treatment of up to 30 hr, Lincolnweld® 812-SRC™ carbon-neutral flux provides smooth bead appearance and exhibits moisture resistance. When welding with Lincolnweld LA-84, this flux will produce weldments with hardness values below 250 Hv10 and less than 1% nickel. Available in 50 lb plastic bag, this SAW flux is designed for offshore welding and NACE applications.
Diesel Motor Oil comes in container with visual level gauge.
Champion Brands, LLC
Clinton, MO 64735
Apr 11, 2013
Champion Classic 15w-40 Blue Flame® Performance Diesel Motor Oil comes in 2.5 gal containers with view stripe, from top to bottom, which permits at-a-glance assessment of content levels. This hybrid synthetic 15W-40 diesel engine oil, designed to meet demands of turbo and super-charged, pre-2007, diesel engines, combines high-zinc performance additives, protection, thermal viscosity stabilizer polymer chemistry, and TBN, supported by carrier blend of synthetic and conventional base fluids.
Laser Machine performs 3-dimensional metal cutting.
JENOPTIK Lasers & Material Processing
07745 Jena Germany
Apr 11, 2013
Comprising robot, laser, electrical cabinet, and rotating table on 12 m² platform, JENOPTIK-VOTAN® BIM is capable of cutting 3D car body components, structural parts, or hydro-formed tubes for exhaust systems in seconds, making it suitable for automotive industry. Laser robot arm is unique in that optical fiber is located only in stationary robot shoulder and laser beam path is totally integrated. Weighing 5 kg, slim laser cutting head accesses tight locations and enables ±100 µm repeatability.
Nano-Reinforced Composites target medical devices.
Foster West Corporation
Putnam, CT 06260
Apr 10, 2013
Incorporating ultra-fine nano platelets that interact with polymer structure to increase flexural properties and optimize rigidity of component, Nano-Reinforced Compounds achieve reinforcement loadings up to 30% by weight for minimally invasive devices such as catheters. Nano-reinforced compounds for thin-wall medical devices include nylons, TPEs, and thermoplastic polyurethanes. With nano-reinforcement technology, engineers can tailor properties of medical device without changing base polymer.
Stainless Steel Bar targets CNC Swiss-style screw machines.
Carpenter Technology Corporation
Wyomissing, PA 19610-1339
Apr 10, 2013
Precision drawn to ASTM half standard or ISO H9 tolerances, PROJECT 70®+ PDB Bar features chamfered ends, optimized straightness, and tight OD tolerances for consistent size along entire length and minimal out-of-round conditions. Round bar forms come in 7 nominal diameters from 0.2500–0.6250 in. with 144 in. standard lengths, as well as 4 grades, furnished in condition A, including: Type 303, Type 304/304L, 316/316L, and 416 stainless.
LED-Optimized Acrylic Sheet promote sustainable efficiency.
Philadelphia, PA 19103
Apr 10, 2013
Formulated of acrylic glass for optimal uniformity and light distribution, Altuglas® acrylic sheet helps reduce energy consumption and number of LEDs installed in applications ranging from signage to architecture as well as interior and exterior design. Material, which is resistant to UV and atmospheric agents, may me thermoformed and lends itself to forms of complex designs. Altuglas® LED system offers 10 colors, while Altuglas® Night & Day offers 4 colors and 2-in-1 day and night effect.
Fully Biodegradeable Laminate is intended for dry products.
Cincinnati, OH 45246
Apr 02, 2013
BioFlex Pack™, available as printed roll stock and premade pouches, requires minimal or no curing time, optimizing supply chain time. Material composition is fully biodegradable and compostable according to European regulation EN 13432 and U.S. ASTM D6400. Meeting industrial compostable standards, 90% of material will be composted ~70 days after disposal. Both adhesive and inks used in material are biodegradable; end-users can take advantage of 10 color flexographic capabilities.
Detectable Plastics target food processing machine components.
LEHVOSS North America, LLC
Pawcatuck, CT 06379
Mar 29, 2013
Promoting contamination-free processing of foodstuffs, LUVOCOM® Detectables are magnetic thermoplastic compounds that combine soft magnetic components with impact-resistant polymers. Presence of fragments or particles of injection-molded, extruded, and otherwise fabricated plastic parts can be observed through metal or x-ray detection systems, allowing apprehension and rejection of contaminated food or parts with foreign particles as small as millimeters. Coloring is also possible.
Corner Boards protect products during shipment and handling.
Volunteer Box LLC
Gallatin, TN 37066
Mar 29, 2013
As preformed products, Tuff-Angle Edge Protectors use full double-face corrugated sheet that is scored, glued, then triple-folded into shape. Three layers create thickness, folding interlock provides corner reinforcement, and design optimizes stacking strength. Corner board can be made thick or thin by utilizing flutes from N to A/C; stacking strength can be varied by reversing corrugation to vertical; and different paper grades allow stacking strength and impact resistance to be varied.
High-Temperature Insulation conserves installation effort.
Aspen Aerogels Inc.
Malborough, MA 01752
Mar 28, 2013
Formed of silica aerogel and reinforced with non-woven, glass-fiber batting, Pyrogel® XT-E insulates piping, vessels, tanks, and equipment in applications up to 1,200°F. Roll sizes of 1,500 and 850 ft² for respective material thicknesses of 0.20 and 0.40 in. help minimize labor during installation, while design minimizes dust to facilitate handling and clean-up. Flexible blanket has density of 12.5 lb/ft³ and water repellency/breathability properties that combat corrosion under insulation.
Polyimide Laminate and Prepreg feature UL qualification.
Nutley, NJ 07110
Mar 28, 2013
UL qualification of polyimide base materials VT-901 laminate and VT-901PP prepreg includes 0.002 in. inner layer cores and minimum overall board thickness stack up of 0.025 in. Furthermore, qualification of these high-temperature, high-reliability products includes minimum outer layer copper thickness of ½ oz copper and inner layer max of 2 oz copper.
Ultra-Fine Yarns are designed for use in PCB substrates.
Aiken, SC 29801
Mar 22, 2013
Used as reinforcement and dielectric, BC2250 and BC3000 allow PCB suppliers to create thinner laminates for higher layer counts and greater circuit density. Yarns are woven into fabric and then laminated with epoxy resin and copper foil to produce copper clad laminate. E-Glass composition contributes to electrical insulation and provides thermo-mechanical stability, and reinforcement with glass fiber fabrics promotes dimensional stability. BC3000 consists of 50 filaments of 4 micron dia.
Hair Dryer Motors are optimized for power and operating life.
New Territories Hong Kong (prc)
Mar 22, 2013
Salon-Power™ hair dryer motors feature magnetic and mechanical design optimized for performance. Weighing less than 250 g, U5413-L delivers 1,800 W of power, has rated life of 1,000 hr. Model U5413-P weighs 250 g and provides 20% more air power and 20% longer operating life, while 2,200 W-rated U5615 has 1,500 hr operating life. Also available, QC381 DC motor has operating life of less than 1,000 hr and delivers less than 1,800 W from 100 g package.
Engineered PVC structurally supports marine, RV applications.
Compression Polymers Corp./Vycom Corp.
Moosic, PA 18507
Mar 13, 2013
Manufactured with proprietary formulation, Endurabond™ provides structural support for marine and RV construction. Material will not, rot, splinter, delaminate, or absorb moisture. Engineered for structural strength, screw retention, and impact resistance, maintenance-free product comes in gray, coarse finish and standard sheet sizes of 48 x 96 in. with ¼, ½, or ¾ in. thickness. Surface finish and formulation promote bonding and adhesion properties.
Engineered Polymers reduce weight while maintaining strength.
Victrex USA, Inc.
West Conshohocken, PA 19428
Mar 08, 2013
Inclusion of high-modulus fibers (HMF) into VICTREX® PEEK™ materials provides strength and stiffness needed by engineers to displace metals such as steel, aluminum, titanium, brass, and magnesium in aircraft system attachments, industrial machinery, and semiconductor and medical equipment. Tested in range of chemicals, VICTREX PEEK HMF polymers are based on Victrex 90-Series formulation and are optimized for fatigue performance and long term use temperature of 500°F.
(Showing headlines 21 - 40) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70