Rez-Solutions    Lakewood, NJ 08701
Nov 26, 2002 Based on pure polyurea, Tough-Cote URC, Tough-Cote URM, and Tough-Cote URR are seamless, flexible coatings that offer water- and chemical-resistance. Products are 100% solids, 2-component, pure polyurea elastomers, and can be applied at temperatures from –40 to +350°F. Coatings, formulated with UV stabilizers, can be applied to metal and roofing substrates, including concrete, foam, and wood.

Anomet Products, Inc.    Shrewsbury, MA 01545
Nov 25, 2002 Custom engineered platinum clad wire and ribbon are offered with various core materials with cladding thickness from 2% and above. Platinum clad wire is offered in sizes from 0.05–10 mm OD, and ribbon sizes range up to 25 mm wide. Platinum exterior provides corrosion resistance and thermal and electro-chemical stability. Core materials can include titanium, tantalum, copper, silver, stainless steel, niobium, molybdenum, nickel, iron-nickel, and nitinol.

Auburn Mfg., Inc.    Mechanic Falls, ME 04256
Nov 25, 2002 CARBO-GLAS is produced by sandwiching AMI-GLAS fabric between 2 layers of partially carbonized acrylic non-woven fabric. Resulting tough, soft, flexible fabric is resistant to weld splatter and direct flame contact. Its composition and multiple, heavy-duty layers, provides protection for equipment and personnel by ensuring effective horizontal capture of concentrated spatter and red-hot cut pieces. Even when wet, fabric retains more than 75% of its strength.

National Starch & Chemical Co.    Bridgewater, NJ 08807-6500
Nov 25, 2002 COOL-BIND® Excel, applied at 250°F, produces low odor, good color, and reduced burn severity hazard. Low temperature requirement results in less char on spinners promoting smooth application. With no moisture in the adhesive, the problems with paper wrinkling are eliminated. It performs well with any combination of equipment because of fast setup and long open time and may be applied at 18 to 20 mils.

Stoody Co.    Chesterfield, MO 63017
Nov 20, 2002 Type A-T1, 625-T1, 82-T1, 182-T1 and HX-T1 flux-cored wires meet chemistry requirements of AWS EniCrFe-2, ERNiCrMo-3, ERNiCr-3, and EniCrMo-2. Operational characteristics make them suitable for similar and dissimilar joining applications, as well as many cladding applications. Wires offer arc stability even when welding in vertical position.

Nevamar, Decorative Products Division    Odenton, MD 21113-1397
Nov 19, 2002 Patterns and woodgrains are offered in Armored Protectionâ„¢ high pressure laminate and matching LamMatesâ„¢ thermalfused malamine panels. The 19 patterns include edgy, muted, soothing, and natural designs intended for a variety of applications including healthcare pediatrics, retail, and hospitality.

Sumitomo Electric Carbide    Mount Prospect, IL 60056
Nov 18, 2002 Model T2000Z with ZX coating technology features high hardness, oxidation resistance, smooth coating surface, high strength, and peeling resistance. Coating and subsrate reduce tool wear and breakage, and provide smooth surface finish. T2000Z is available in both negative and positive rake geometries.

Albany International High Performance Materials, Inc.    Mansfield, MA 02048-9114
Nov 14, 2002 Designed for applications requiring high dimensional stability, Pyropel® HDT polyamide-imide (PAI) exhibits electrical and mechanical performance at continuous use temperatures from -60 to +260ºC. Fully reacted thermoset does not require post-curing and will not soften or creep. Product is available in pure form in 12 x 12 in. plates with thicknesses of 1/4, 3/8, 1/2, 3/4, and 1 in. as well as in machined parts.

Zircar Ceramics    Florida, NY 10921-0579
Nov 14, 2002 TYPE Z-500 is made of 60% SiO₂ and 40% Al₂O₃ with nominal bulk density of 50 pcf and average surface hardness of 93 on A scale. It exhibits 0.65% shrinkage after 25 hr at 800°C. Product is prefired and does not outgas upon heating. It is completely free of organics and is fully compatible with silica, alumina, and boron nitride coatings. Material is used in transport and continuous casting of molten aluminum.

Chomerics, Div. Of Parker Hannifin Corp.    Woburn, MA 01888-4014
Nov 08, 2002 PREMIERâ„¢ molded plastic parts offer proprietary dispersion of nickel-plated carbon fibers in user's choice of resin matrices. Evenly dispersed, randomly oriented fibers permit integration of shielding into housings without additional processing steps. Providing greater than 90 dB of EMI shielding performance, thermoplastics resist abrasion and corrosion. Parts can be molded in wall thicknesses less than 0.030 in. for maximum geometric flexibility.

Chomerics, Div. Of Parker Hannifin Corp.    Woburn, MA 01888-4014
Nov 06, 2002 Conductive CHO-SEAL® 6371 nickel-graphite-filled silicone elastomer gaskets provide EMI shielding effectiveness of above 80 dB from 100 MHz up to 10 GHz. Corrosion-resistant material, suited for outdoor applications, can be fabricated into virtually any shape using compression and injection molding processes. No post-curing is needed. Gaskets are rated UL 94V-0 for fire resistance and are available in forms such as o-rings, broad sheets, die-cuts, and other custom shapes.

80/20, Inc.    Columbia City, IN 46725
Oct 24, 2002 80/20 Incorporated offers Metric T-Slotted Aluminum Extrusions, in a series of 25mm and 40mm units. They use the same basic joining hardware and accessories that the 80/20 fractional line offers. T-slotted extrusions can be used in a variety of applications including machine frames, machine guards and enclosures, office furniture, material handling equipment, and prototype equipment. All structures are assembled using hand tools.

Syfan USA, Corp.    Cooper City, FL 33024
Oct 23, 2002 Cross-linked polyolefin SYTEC® MVP is available in 60 and 75 ga, in widths up to 40 in. CF. Safe for food and non-food applications, it shrinks at low temperatures suitable for chocolate and icecream. SYTEC® RF4 creates leak-proof package and is designed for wrapping fresh or frozen meat. It stretches and remembers shape once wrapped, making it tamper evident. SYTEC RF4 is available in 60, 75, and 100 ga, either center folded or in single wind.

Pactiv Corp.    Lake Forest, IL 60045
Oct 22, 2002 Microfoam® ORCAâ„¢ Wrap and Astro-Foam® ORCAâ„¢ Wrap feature protective sheet foam laminations with ventilation holes. Wraps reduce damaged goods, resist scratching, and offer breathability, which minimizes condensation and keeps moisture away from product. Microfoam® Wrap features 1/10th in., polypropylene foam laminated to .8 mil polyethylene film. Astro-Foam® Wrap is made from 3/16 in., low-density polyethylene laminated to .8 mil polyethylene film.

Naugahyde    Stoughton, WI 53589-2481
Oct 14, 2002 NaugaTrans meets DOT Federal Railroad Administration 49 CFR Part 216 Federal Register Vol 64, No 91 Rules and Regulations for flammability and smoke emission requirements. Intended for use in subway cars, buses, and train cars, material is offered in most colors used by public transporation. It meets low smoke, low flame requirements (2-200 specification) and passes accelerated weather resistance testing. Seating vinyl is available in 54 in. width rolls.

80/20, Inc.    Columbia City, IN 46725
Oct 11, 2002 Available in fractional and metric sizes, modular T-Slotted aluminum extrusions are suitable for constructing modular machine frames. Offered as alternative to welded steel, aluminum extrusions are available with panels, handles, wire mesh, lift-off hinges, casters, and leveling feet.

Goldsmith & Eggleton, Inc.    Wadsworth, OH 44281 2084
Oct 11, 2002 G&E Blended 565 EPDM is suited for high-performance products and continuous cure extrusion applications. Ethylene and ENB are measured and controlled through entire manufacturing process for repeatable processing characteristics. G&E Blended 565 EPDM can be colored to allow for more product applications. Supplied as free-flowing pellets in 33 lb bags, applications include tube and cover stock, construction profiles, window gaskets, and molded goods.

Fujipoly America    Carteret, NJ 07008
Oct 10, 2002 SARCON® SF-Nd Phase Change Thermal Interface Pads have thermal conductivity of 2.0 W/m-K and thermal resistance of only 0.015°C inch²/W, at 85 psi. When junction temperature reaches 60°C, phase change material changes from solid state and begins to flow, filling all micro-pores of component and heat sink. Wetting action removes all pockets of air, providing best possible heat transfer. Before device is heated, Sarcon® SF-Nd is dry to the touch.

Rogers Corp., Circuit Materials Div.    Chandler, AZ 85224
Oct 08, 2002 BISCO® EC-2000 Series Conductive Silicones are nickel-graphite filled materials offering compression-set, flame and corrosion resistance. They come in wide continuous roll goods in thicknesses from 0.020 to 0.125 in., making them suitable for replacing fabric-over-foam in intricately shaped applications. EC-2000 products fall in 30-40 Shore A durometer range and are suitable for base stations, cell phones, computers, antennas, and electronic devices.

Creative Materials Inc.    Ayer, MA 01432
Oct 02, 2002 Type 122-22 screen printable, electrically conductive ink and coating maintains stable viscosity during all application methods and has low odor. It adheres to FR2, FR3, and FR4, printed circuit board substrates, as well as Kapton, Mylar, and glass. Product is resistant to abrasion, scratching, and thermal aging. It can be cured for 30 min at 70°C followed by post cure of 30 min at 160°C. Ink is suitable for electroless plating and EMI/RFI shielding of polyimide circuits.