Novacel    DEVILLE LES ROUEN 76250  France
Aug 24, 2004 Novacel 9019 clear, coextruded film, with polyolefin base, protects flat screens against scratches and dirt during assembly, handling, storage, and transport. Applied to clean, dry surface at temperature between 100–200°F, film can remain on polycarbonate, polystyrene, PVC, and other plastic sheets while undergoing heat treatment before and during thermoforming. No adhesive residue remains on surface after removing film.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Aug 23, 2004 Hysol® GR828 green molding compound is designed for SO packages with nickel palladium gold or copper silver spot lead frames that require JEDEC Level 1, 260°C reflow and green flame retardant technology. Also suited for SO, SOP, SSOP, and TSSOP package types, non-antimony/non-bromine/non-phosphorous material is flame-retardant and conforms to UL 94 V-O at 1/8-inch thickness.

Colbond Geosynthetics    Enka, NC 28728
Aug 19, 2004 Available with filter fabric on one side and featuring square waffle configuration, Enkadrain 3000R subsurface drainage composites have polypropylene core made from 99.5% recycled post industrial waste. Because they exceed 40% post-industrial recycled content, they help contribute up to 2 LEEDS program points when used in conjunction with other recycled content products.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Aug 18, 2004 Reworkable Loctite® PowerstrateXtreme(TM), suited for use between heat sink and heat dissipating components, is supplied as free-standing film between 2 release liners. Compound flows at phase change temperature and conforms to surface features of heat sink and component. Upon flow, air is expelled from interface, thermal impedance is reduced, and product performs as thermal transfer material. It adheres to heat sinks and devices at room temperature.

Multitherm LLC    Malvern, PA 19355
Aug 12, 2004 MultiTherm ULT-170® remains pumpable at temperatures below -170°F and allows for retrofits with minimal equipment modifications. Biodegradable product exhibits thermal stability and is suited for use in critical applications with temperature range of -170 to +325°F.

Multitherm LLC    Malvern, PA 19355
Aug 12, 2004 MultiTherm OG-1®, designed for use in open-loop systems, contains inhibitors to prevent oxidative degradation and deposits. Formulated for max film temperature of 600°F and max system bulk temperature of 550°F, product has flash point of 455°F and fire point of 520°F. Fluid is designed for use in liquid-phase heat transfer fluid systems open to atmosphere, or where heat transfer fluid in expansion tank may come into contact with air.

Scapa North America    Windsor, CT 06095
Aug 12, 2004 Thermoplastic Bioflex 130 is suited for wound dressings as well as surgical drape and gown fabrication. Available in thicknesses of 1-3 mils, product is supplied on casting sheet and can be laminated to variety of webs.

CMI Enterprises    Miami, FL 33014
Aug 10, 2004 Included in Illusion series, Reflections has leather-like tactile feel and maintains performance standards required for use by contract market. Soft topcoat and backing allows for draping and ease of fabrication. BLOCKADE top-coating process facilitates cleaning and adds to product durability. Material is mildew resistant, flame retardant, and abrasion resistant.

Indium Corporation    Clinton, NY 13323
Jul 29, 2004 Designed for use in BGA bumping and board level attachment, WS-364 water-soluble paste-flux can be applied by pin-transfer or stencil printing. It can be cleaned using room-temperature water and offers high yield in BGA bumping process. Available in syringes or cartridges, halide-free product is suitable for Sn/Pb and Pb-free applications.

Watlow Gordon    Richmond, IL 60071
Jul 29, 2004 Interference Fit Construction Heated Parts offer alternative to milled grove or brazed assemblies for temperatures exceeding 450°C. With Finite Element Analysis or iterative prototyping, parts can achieve thermal transfer and temperature uniformity equaling ±1%. All joints can be welded to assure vacuum tight seal. Available in stainless steel, nickel, Inconel®, aluminum, copper, and bronze, heated parts can be customized into variety of shapes and sizes.

Scapa North America    Windsor, CT 06095
Jul 29, 2004 Bioflex® Rx630P consists of 7 mil clear polyester film coated on one side with 2.75 mil thermoplastic urethane heat-seal adhesive. Film is supplied on 1.5 mil polyester release liner. Capable of reactivation, thermoplastic adhesive has no tack and can be used on parts that will be stacked during assembly. High-tack, low-ooze product adheres to variety of substrates and is suited for applications that require heat bonding.

CPS Technologies Corp.    Norton, MA 02766
Jul 29, 2004 AlSiC (Aluminum Silicon Carbide) enables tailored coefficient of thermal expansion (CTE), offering compatibility with various electronic devices and assemblies; isotropic CTE value is adjusted by modifying Al-metal/SiC-particulate ratio. Thermal conductivity of material prevents bowing and flexing of packaging and substrate material. Product is suited for housing, interconnection, and thermal management of microelectronic, optoelectronic, and power electronic devices.

MACtac, Technical Products Division    Stow, OH 44224 1888
Jul 27, 2004 Type TM9720 consists of 0.5 mil clear polyester film carrier, semi-bleached kraft release liner, and hypoallergenic medical-grade adhesive. Product is suited for medical devices where skin contact is possible such as surgical drapes, diagnostic sensors, and dental dams.

Diagraph Corp.    St. Charles, MO 63304
Jul 22, 2004 ITW Inks include water-, alcohol-, and solvent-based inks and cleaners, along with MEK inks and cleaners, and high-resolution inks. They are available for Marsh printers, Unicorn printers, valve systems, and porous and non-porous surfaces. Offered in bottles, pails, or cartridges, inks features sub-micron filtration and are fully inspected.

Victrex plc / Victrex USA Inc.    Greenville, SC 29615
Jul 21, 2004 VICTREX® Ultra-High Purity PEEKâ„¢ contains no components that could leach into fluid stream or outgas in vacuum or high-heat environments. When heated to 212°F for 30 min, volatile organics outgassed for product measured zero. Product also exhibits plasma erosion resistance, is inherently lubricious, and provides smooth surface finish. Abrasion-resistance prevents particulate generation or sloughing. Product meets purity requirements for various applications.

Linq Industrial Fabrics, Inc.    Summerville, SC 29483 9665
Jul 14, 2004 CROHMIQ® Type D Fabric features humidity-independent coating with components that cannot wash off, migrate to surface, or contaminate bulk product inside FIBC. CROHMIQ fabrics offer protection against incendiary electrostatic discharges, and FIBCs do not require grounding. Fabric is suited for bulk storage or transport of dry food, and complies with Federal Food, Drug, and Cosmetic Act and applicable food additive regulations of FDA.

Cixi Weilite Sealing Material Co.,Ltd.    Cixi City 315300  China
Jul 13, 2004 Made of asbestos, rubber, and other chemical materials, CAF Jointing Sheet is formed by rolling after mixture treatment. It is 1,500 mm wide and available in thickness from 0.4–6.0 mm. Lengths are 1,000, 1,350, 2,000, and 4,000 mm. Sheet is suited for sealing and heat insulation in machinery, automobile, farm equipment, and petroleum industries. It is available with steel wire or graphite, and as oil-resistant and acid-resistant types.

Cixi Weilite Sealing Material Co.,Ltd.    Cixi City 315300  China
Jul 13, 2004 Manufactured from Kevlar fiber with oil-resistant rubber filler, Non-asbestos Rubber Sheet (Compressed Non-asbestos Jointing Sheet) is suitable for use as oil-resistant jointing medium for heat installations and engine sealing. Measuring 1,500 mm wide, colored sheet is available in 1,000, 1,350, 2,000, and 4,000 mm lengths.

Cixi Weilite Sealing Material Co.,Ltd.    Cixi City 315300  China
Jul 13, 2004 Sheet is made from flake graphite with high carbon content. It exhibits resistance to high temperatures and corrosion and offers good elasticity. Suitable as basic material for making reinforced graphite sheets, graphite tapes, packing, and sealing gaskets, product has working temperatures of -200 to +650°C in air and -200 to +3,000°C in non-oxidizing media.

Cixi Weilite Sealing Material Co.,Ltd.    Cixi City 315300  China
Jul 13, 2004 Available in 50, 80, 100, and 120 m single-roll lengths, Flexible Graphite Tape is suitable for use as filler for spiral wound gasket, in-situ pump and valve gland packing, facing material for cam profile type gaskets, and filler for metal jacketed gaskets. Product is also used in manufacture of graphite packing rings.