Parker/Texloc Div. of Parflex    Fort Worth, TX 76106
Feb 02, 2005 Custom TexFluor(TM) PTFE Shapes are offered in D, J, S, U, X, and other configurations, from .020-2.00 in. dia., with hollow or solid ID. Capable of operating continuously at up to 500°F, close tolerance tubing profiles provide non-stick surface and resist most chemicals and solvents. TexFluor(TM) PTFE Shapes can be supplied spooled or cut to length, with services include forming, hole punching, and kitting also available.

Hobart Brothers Co.    Troy, OH 45373-2900
Feb 01, 2005 Suited for shipbuilding, railcar, and general fabrication, Tri-Mark® Metalloy® 76 produces minimal spatter and improves wetting action while minimizing cold lap and root pores. Metal-cored, carbon steel wire, usable in single- and multi-pass welding, is available in .035–3/32 in. dia and operates using DCEP (reverse polarity). Product is designed for use with shielding gas mixture of 75–95% argon/balance CO2.

ARPAC    Schiller Park, IL 60176
Jan 31, 2005 Dual roll models 25TW (intermittent motion) and 45TW (continuous motion) provide alternative to single roll print registered tray wrapping. They enable existing and new ARPAC tray shrink wrappers to run print registered films on top film of package. Systems will wrap any unitized or tray-packed product, including random pack sizes. Graphics on trays can be seen through clear film, while print registered film on top blocks individual product label UPCs.

Holland Shielding Syst. BV      Netherlands
Jan 25, 2005 Suited for use as electro-magnetic shielding, Mu-copper foil can be applied as wallpaper to transform existing room into Faraday cage with attenuation level of 40–80 dB. Product, which shields against magnetic and electrical fields, is non-flammable and resistant to aging. It can also be used as load bearing basis for floor finishing and floor covering. Doors with hf-seals, vent panels, shielded windows, and power filters are available.

CYRO Industries    Rockaway, NJ 07866 2120
Jan 21, 2005 Free of material defects, dust, and contaminants, use of ACRYLITE SuPureâ„¢ results in visibly pure molded parts. Weatherable product shows no adverse effects to UV light and is offered in different grades for various degrees of heat resistance, flow, and molecular weight. Loaded into woven polymer bulk packaging to ensure product remains free of contaminants during shipping, polymer is suited for optical lenses as well as visual and automotive molding applications.

Cobar Solder Products    Londonderry, NH 03053
Jan 20, 2005 Able to withstand temperatures required for lead-free soldering, 94QMB9 maintains its wetting characteristics and has evaporative formula that reduces preheating time and potential for oxidation and splatter. No-clean flux contains DI-water and alcohol and features non-ionic activator system that exhibits block-polymer functionality. Product is suited for lead-free soldering in wave and selective soldering systems.

PACOTHANE Technologies    New York, NY 10028
Jan 18, 2005 PACOPRESSâ„¢ Press Pads control and retard heat delivered to press load. They also equalize pressure distributed across panel while laminating and pressing high- and low-pressure decorative and industrial plastic laminates. Able to be reused minimum of 20 times each, products are available in rolls up to 60 in. wide or as custom-cut sheets. Dust-free pads do not produce noxious odors during lamination process.

Hospital Specialty Company    Highland Heights, OH 44143
Jan 14, 2005 San-Eazâ„¢ Sanitary Door Handle Tissues help keep hands clean when leaving public restrooms. When exiting, patron pulls tissue from dispenser, covers door handle with tissue while opening door, and tosses tissue in nearest trash receptacle. User's clean hands never touch potentially dirty handle. San-Eazâ„¢ Tissues are packed 100 per dispenser. Refills are available in 100-count packages.

Blue Blade Steel    Kenilworth, NJ 07033
Jan 07, 2005 Custom machine-edged strip steel coils are offered in choice of square, round, or any combination of machine-beveled edges. Uniform, precision cut edges eliminate metal distortion and problematic performance chatter that is characteristic of hand or machine ground edges.

Stockwell Rubber Co. Inc.    Philadelphia, PA 19136-1512
Dec 20, 2004 Pads and gaskets made from R10404-M are suited for use in electronic assemblies requiring mechanical shock isolation and thermal conductivity. Particle-filled, closed cell, silicone sponge rubber requires ~25–30% deflection to optimize thermal transfer properties. Flexible and compressible, it withstands -80 to +400°F temperatures and maintains 0.65 W/m-K thermal conductivity. It comes in 6 thicknesses from .032–.250 in. and with TR3 thermally conductive acrylic adhesive.

Blue Blade Steel    Kenilworth, NJ 07033
Dec 10, 2004 Custom strip steel, produced via computer-automated process control operation, is suited for use by spring manufacturers and OEMs. It contains no soft spots, offering coil to coil consistency, and is offered with choice of engineered tempering solutions, finishing options, and other services for custom-enhanced material structures. Product is packaged in flat ribbon coils up to 60 in. OD or compact, oscillating coil spools up to 2,000 lb.

CeramTec North America Corp.    Laurens, SC 29360
Dec 08, 2004 Non-toxic Alunit® aluminum nitride ceramic substrate delivers 10 times more insulating power and heat conductivity than aluminum oxide. Material is suited for thin-film and thick-film applications, and is offered in 4 surface finishes: fired, fired superior, ground, and polished. It can be used for high-density components and hybrids in applications such as power electronics, IGBT modules, telecom components, cooling devices, direct copper bonding, and LEDs.

Misumi USA    Schaumburg, IL 60173
Dec 07, 2004 Offered in sizes from 3-18 in. Angle Plates combine iron, steel, 304 stainless steel, or aluminum casting with straightness and perpendicularity within 0.003 in. over 6 in. run to guarantee precise fit with no gaps between machinery and plate. Faces and edges are machined flat, square, and parallel. Plates are available with standard pre-drilled mounting hole patterns as well as without holes to allow customer to drill plates in-house.

Shell Lubricants    Houston, TX 77002
Dec 03, 2004 Shell Tellus® and Shell Tellus® Premium are mineral oil-based fluids designed to help reduce premature pump failures, increase system efficiency, and reduce component failure. Providing protection at high- and low-load condition extremes, products exhibit hydraulic, thermal, and oxidative stability. Additive system makes sure hydraulic system remains clean and performance is maintained. Products filter efficiently wet or dry.

Pars Mfg. Co.    Ambler, PA 19002-4717
Dec 02, 2004 Manufactured from texturized fiberglass yarn, heat-resistant PARGLASS cloth contains no compound, cement, or wire and will not burn or smolder. It retains 25% of tensile strength, even when service conditions reach 1,000°F, and will not swell, shrink, deteriorate, or change chemically. Available in weights from 8.5–40 oz/yd², product can be aluminized on one side for thermal reflection or have brass or stainless steel wire inserts for increased tensile strength.

Malish Corp., Plastic Div.    Willoughby, OH 44094
Dec 01, 2004 Designed to meet unique needs of various applications, custom profile extrusions are produced to user's design and specifications in both rigid and flexible material options. Typical extrusion materials include, but are not limited to, PVC, ABS, ASA, HIPS, TPR, TPE, HDPE, and PP. Co-extrusion profiles are available in flexible on rigid, flexible on flexible, color on color, or clear on opaque configurations.

EFD Inc., Solder Paste Group    Lincoln, RI 02865
Dec 01, 2004 Colorless, no-clean P520 Flux leaves clear residue for cosmetic joint finish. Printed or dispensed solder paste deposits retain shape through reflow cycle without slumping or bridging, making flux suited for fine pitch, no-clean electronic and electro-mechanical soldering applications. Flux is environmentally safe and exceeds IPC Joint Industry Standards J-STD-004A.

Shell Oil Co.    Houston, TX 77002
Nov 30, 2004 Formulated with proprietary additive technology, mineral oil-based Tellus® and Tellus® Premium Hydraulic Oils provide equipment wear protection, helping reduce premature pump failure and increase system efficiency. Hydrolytic stability provides resistance to degradation in presence of water, and thermal and oxidative stability results in longer fluid life and optimum machine performance. Oils are available in variety of packages and viscosities.

pinta acoustic Inc.    Minneapolis, MN 55412
Nov 26, 2004 SONEXclassic(TM) Panels, in colortec(TM), are made from Class 1 fire-rated willtec® foam impregnated with dye. Dye penetrates entire thickness of each panel, making it possible to keep clean, consistent look even when pieces are cut to fit around conduit or other obstructions. Panels have modified anechoic wedge design that absorbs disruptive sounds, and they withstand excessive moisture and humidity without warping, swelling, or sagging.

Zotefoams Inc.    Walton, KY 41094
Nov 26, 2004 Featuring closed-cell nature, development-grade Polyamide Foam offers density of less than 30 kg/m³, making it suited for automotive, industrial, and offshore sectors. Offering extreme temperature and FST performance, ultra-low density Silicone Foam is manufactured with density of less than 50 kg/m³. It is targeted at aviation, aerospace, public transportation, and military sectors for sealing, thermal, and acoustic insulation applications.