Heat Treating Equipment

Chemical Processing & Waste Management, Materials & Material Processing, Thermal & Heating Equipment

Chilling/Heating Dry Baths hold 64 - 1.5 mL centrifuge tubes.

January 22, 2016

With temperature ranges of -10 to 100°C and -20 to 100°C, respectively, EchoTherm™ Models IC30 and IC30XT can freeze, chill, or heat samples in variety of sample blocks that can hold 0.2–50 mL centrifuge tubes, test tubes, vials, assay plates, and round-bottom flasks. Measuring 8.5 x 10 x 4 in., Peltier-driven units feature digital display and control to 1°C, 30-day countdown timer in hours/minutes/seconds, data logger, and RS232 I/O port to collect data or to control units by computer. Read More

Chemical Processing & Waste Management, Materials & Material Processing, Thermal & Heating Equipment

Chilling and Heating Dry Baths offer remote control.

November 19, 2015

Suited for robotic systems and fume hoods or environmental chambers, EchoTherm™ RHB20 and RIC20 can be controlled by computer or MIC20 Remote Terminal via RS232 I/O ports. Users can set and control temperature of samples in various containers from assay plates to centrifuge tubes from -20.0 to 120.0°C with accuracy to ±0.2°C. When connected to either dry bath, MIC20 can also collect current set point or temperature, set or clear idle mode, and perform calibration. Read More

Thermal & Heating Equipment, Materials & Material Processing

Cold Car Batch Oven is used for stress relieving of weldments.

October 26, 2015

With 15 x 10 x 10 ft work chamber and powered load/unload cold car, gas-fired cold car industrial batch oven can be used for stress relieving steel assemblies weighing up to 20,000 lb. Oven features Expandable Surface® design and operating temperature range of 250°F above ambient to 1,250°F max. To provide even heating and temperature uniformity, recirculation system utilizes combination air flow and two 40,000 cfm @ 50 hp blowers. NEMA 12 control panel is standard. Read More

Materials & Material Processing, Thermal & Heating Equipment

Walk-In Preheating Oven reaches temperatures up to 900°F.

October 26, 2015

Along with 50 x 96 x 96 in. workspace, No. 846 features 8 in. thick insulated walls, 6 in. insulated floor, aluminized steel interior and exterior, and removable, top-mounted heat chamber. One 7,800 cfm, 5 hp, recirculating blower provides combination airflow to workload, and access to Type 304, 2B finish stainless steel heat chamber interior is facilitated by 2 independent doors (front and rear). Floor of each opening is reinforced for 5,000 lb loading at removable subway grate. Read More

Chemical Processing & Waste Management, Materials & Material Processing, Thermal & Heating Equipment

Chilling/Heating Dry Bath controls exact sample temperature.

October 5, 2015

Supplied with temperature probe that is inserted directly into sample or sample block, EchoTherm™ Model IC50 displays and controls temperature to ±0.1°C. Peltier-driven unit can freeze, chill, or heat samples from -10.0 to 110.0°C in assay plates, centrifuge tubes, vials, test tubes, and most any other sample container. Measuring 65 x 8.75 x 3.5 in., IC50 includes countdown timer, surface hot indicator lamp, data logger, and RS232 I/O port to control unit by computer or to record data. Read More

Thermal & Heating Equipment, Materials & Material Processing

Gas-Heated Belt Conveyor Oven attains 850°F max temperature.

August 28, 2015

Along with 36 in. x 18 ft x 15 in. workspace, No. 867 has 800,000 BTU/hr installed in natural gas burner and one 12,500 cfm, 10 hp stainless steel recirculating blower. Oven travel length comprises 3 ft open belt loading and unloading zones, 18 ft insulated heat zone with recirculated airflow, and 30 in. wide, 304 stainless steel woven wire conveyor belt. Latter features 3 in. high flex plate edges and is driven by ½ hp motor v-belt drive capable of variable speed operation from 1–19 ipm. Read More

Thermal & Heating Equipment, Materials & Material Processing

High Temperature Ovens operate up to 1,000°F.

August 4, 2015

Featuring horizontal recirculating airflow to ensure temperature uniformity of ±5.6°C at 538°C, Models RAF and RFF are suited for annealing, aging, stress relieving, and other process critical applications. Class A Model RFF is designed to meet NFPA 86 requirements for applications that involve flammable solvents. Available in cabinet and benchtop sizes (4.2, 19, and 35 ft³), furnaces have Protocol 3™ microprocessor-based temperature and hi-limit controller with LCD and real-time clock. Read More

Chemical Processing & Waste Management, Materials & Material Processing, HVAC

Quench/Scrubber Systems treat contaminants from high-temp sources.

July 20, 2015

Available as complete ScrubPac™ Custom Skid-Mounted systems in sizes capable of handling gas capacities from 500–150,000 cfm, Hi-TScrub™ Quench/Scrubber Systems utilize Bionomic advanced horizontal or vertical configuration atomized spray and venturi gas quenchers to cool corrosive hot gas streams up to 2,600°F before scrubbing. Cooled gas with acid vapors, halogens, or particulate is removed with Bionomic Series 5000 Packed Tower or Series 7000 Venturi Scrubber. Read More

Thermal & Heating Equipment, Materials & Material Processing

Electrically Heated Walk-In Oven operates up to 1,200°F.

June 24, 2015

Offering 48 x 60 x 72 in. workspace, No. 901 utilizes 120 kW Incoloy-sheathed tubular elements to heat oven chamber and 12,500 cfm, 10 hp recirculating blower for horizontal airflow to workload. Unit features 10 in. thick insulated walls, comprising 2 in. of 1,900°F block and 8 in. of 10 lb/cf density rockwool. Constructed with aluminized steel exterior and Type 304, 2B finish stainless steel interior, oven has inner/outer door gaskets and 7 in. insulated floor with truck wheel guide tracks. Read More

Controls & Controllers, Materials & Material Processing

Heat Treating Power Console features 6-zone design.

May 28, 2015

Designed with no traditional contactors or transformers, 6-Zone Heat Treating Intelligent Power Console features program-controlled technology and constant current operation that maintains ampere output, regardless of 1, 2, or 3 heaters. Unit includes short circuit, over-voltage, and under-voltage protection, and will not allow cables or heater tails to arc out. To streamline paperwork, console is available with digital recording option as well as 12- or 24-point recorder strip chart. Read More

Thermal & Heating Equipment, Materials & Material Processing

Universal Style Oven heats heavy metal dies to 550°F.

May 22, 2015

Providing 24 x 24 x 24 in. workspace dimensions, electrically heated No. 1034 utilizes 7 kW Incoloy-sheathed tubular elements to heat oven chamber and 400 cfm, 1/3 hp recirculating blower to provide universal front-to-rear airflow to workload. Oven features 6 in. insulated walls, aluminized steel exterior, and Type 304 SS interior with 2B finish. Measuring 24 x 24 in., two shelves are rated at 300 lb each and supported by rollers. Integral oven leg stand is also provided. Read More

Thermal & Heating Equipment, Materials & Material Processing, Laboratory and Research Supplies & Equipment

Benchtop Oven suits production and laboratory applications.

March 23, 2015

Supporting USB, Modbus, and Ethernet communications, datalogging LAC features 304 stainless steel interior, horizontal recirculating airflow, and ±2.5°C temperature uniformity at temperatures up to 500°F. Controls, heater, and fan are located on top for ergonomics and service access convenience. Available for processing flammable solvents or removing large amounts of moisture, standard Class A (NFPA 86) model includes pressure relief panel, purge timer, exhaust fan, and safety circuitry. Read More

Thermal & Heating Equipment, Materials & Material Processing

Cabinet Oven heats metal parts to remove deposits.

January 22, 2015

Operating up to 1,250°F and providing 50 x 50 x 50 in. workspace dimensions, No. 975 is equipped with 160 kW Incoloy-sheathed tubular elements that heat oven chamber, and 6,000 cfm 5 hp recirculating blower that provides horizontal airflow to workload. Electrically heated oven has 10 in. insulated walls comprising 2 in. of 1,900°F block insulation and 8 in. of 10 lb/cf density rockwool insulation. Insulated floor is reinforced for 1,000 lb loading with ¼ in. thick, Type 304 SS plate.
Read More

Thermal & Heating Equipment, Materials & Material Processing

Vacuum Furnace offers temperatures to 2,200°C.

August 7, 2014

Available in sizes from 1–12 cu-ft, Workhorse™ II GEN II Vacuum Furnace offers temperatures of 1,000, 1,315 1,650, and 2,200°C in either low or high vacuum configurations. Unit features all stainless steel chamber, upsized diffusion pumping system, and updated computer control system with touchscreen monitor. Several options are available for customizing unit to add debinding capability, fast cooling, or operation in hydrogen gas. Read More

Chemical Processing & Waste Management, Materials & Material Processing

Quenchers/Scrubbers treat contaminants from high-temp sources.

July 7, 2014

Hi-TScrub™ Quench/Scrubber Systems utilize horizontal or vertical configuration atomized spray and venturi gas quenchers to cool corrosive hot gas streams up to 2,600°F before scrubbing. Cooled gas with acid vapors, halogens, or particulate is removed with Bionomic Series 5000 Packed Tower or Series 7000 Venturi Scrubber. All units are available as complete ScrubPac™ Custom Skid-Mounted systems in sizes to handle gas capacities from 500–150,000 cfm. Read More

Material Handling & Storage, Laboratory and Research Supplies & Equipment, Materials & Material Processing

Single Basket Retort offers rotary and reciprocating agitation.

May 9, 2014

Facilitating production-scale testing in R&D lab, 5 ft diameter Versatort provides static processing as well as rotary agitation in 32 in. cube basket and reciprocating agitation in 40 in. cube basket. Rotary agitation works well for vertically oriented packaging, such as cans and glass jars, while reciprocating agitation is more effective for horizontally oriented containers, such as pouches and bowls. Processing modes include saturated steam, water spray, water immersion, and steam-air. Read More

Chemical Processing & Waste Management, Thermal & Heating Equipment, Materials & Material Processing

Fluidized Temperature Bath offers supplementary cleaning solution.

April 24, 2014

Intended for cleaning extrusion tooling and parts, FTBLL12E incorporates analog dial controller for setting bath temperature and gate valve for manually adjusting Fluidizing air. Other features include robust heater, seam welded solid top and inner tank, and fully automatic systems with optimized thermal cleaning performance. This fluidized temperature bath suits companies that have few extrusion lines or companies that want to supplement current cleaning methods. Read More

Machinery & Machining Tools, Waste Handling Equipment, Materials & Material Processing

Evaporative Cooling Retorts suit raw product processing.

March 28, 2014

Providing automated monitoring and control, as well as extensive recipe flexibility, Evaporative Cooling Retorts offer solution for processing 3,200 lb batches or 50–800 gallon kettles of raw products. Since evaporative cooling consists of deaeration or removal of air from product, it not only cools, but also improves product quality and extends shelf life by slowing bacterial growth. Typical applications include potatoes, soups, sauces, fruits, chick peas, vegetables, and some meat products. Read More

Thermal & Heating Equipment, Materials & Material Processing

Drum/Tote Oven melts materials chilled by cold weather.

January 30, 2014

Sahara Hot Room Model S32 heats and accelerates flow of thick or viscous materials in drums or totes chilled by cold weather. While able to heat 32 drums on pallets or 8 totes with saturated steam up to 200 psig, forklift-portable oven can also use hot oil or hot water as heating medium. Fully insulated unit features steel construction and built-in spill containment. Options include air circulation, exhaust capabilities, and digital temperature control with overtemp protection. Read More

Thermal & Heating Equipment, Materials & Material Processing

Electrical Ladle Heaters offer 70% net efficiency.

December 26, 2013

By heating ladles with electricity instead of gas, Kanthal Heaters enable aluminum producers and steel foundries to lower energy costs and CO2 emissions. Design allows same heater tube to be used for both heating and holding. Heating elements are arranged in reflector, allowing radiation to be accurately directed toward target area. With uniform temperature profile and no flame or streaming of hot exhausts, lifetime of refractory is prolonged by 10–15%. Read More