Guill Tool & Engineering Co.
West Warwick, RI 02893
Nov 05, 2009 Designed to manufacture PE or HDPE piping from 4-20 in. in diameter, Model 2030 is suited for marine, cable, electronics, oil, gas, and water industries. Self-contained system uses combined die and reservoir system for optimal material distribution. Weighing 6,000-10,000 lb, Model 2030 has mounted track and cart that enable handling and maintenance. Cart system tilts die on-the-fly to compensate for catenary effect caused by gravity as extrusion product exits equipment.

Davis-Standard Corp.
Pawcatuck, CT 06379-2313
Oct 29, 2009 Available for retrofit to existing 3½ in. Davis-Standard extruders, Hinge-Roll Feedsection offers uniform, consistent feed rate and adjusts automatically based on feed strip size. Feedroll and interior of feedsection are accessible by unfastening 2 swing bolts and lowering attached swing-down cartridge by means of electro-mechanical cylinder. Belt drive eliminates lubrication requirements and belts automatically loosen for feedroll removal.

Guill Tool & Engineering Co.
West Warwick, RI 02893
Oct 08, 2009 Designed to handle exotic materials such as bioplastics, composites, and advanced polymer blends, Model 1025 serves medical, automotive, and specialty packaging industries. Unit yields 8.5-10 in. of core diameter and is available in single-layer, multi-layer, multiple stripes, co-extrusion, triple extrusion, spiral, and split flow designs. Heat distribution is achieved via band, cartridge, or coil type heater. FeatherTouch alignment helps avoid parison curl, curtaining, and webbing.

Davis-Standard, LLC
Pawcatuck, CT 06379
Mar 23, 2009 At 40 in. wide, XP Express® is offered with technology for producing sheet with hundreds of layers. It can be equipped with coextrusion die, feedblock, and layer multiplier as well as special adaptor piece for injecting atmospheric gas for foam applications. XP Express PS (packaging sheet) and CS (custom sheet) models are available for in-line thermoforming of PP, APET, and PS and may also be equipped for extrusion processes involving EVA, TPA, and vinyl acetate copolymers.

Guill Tool & Engineering Co.
West Warwick, RI 02893
Mar 03, 2009 Featuring combined die and reservoir system that promotes even material distribution and product consistency, Model 2030 eliminates extrusion issues associated with inconsistent material flow during manufacture of large wall piping (4-20 in. dia) used for oil, gas, and water applications. Co-extrusion capability enables simultaneous extrusion of multi-materials or multi-stripes, and flow analysis software ensures extrusion die is engineered to perform to specifications.

RDN Mfg. Co., Inc.
Bloomingdale, IL 60108
May 05, 2008 Able to operate as 2-belt horizontal/vertical puller or 4-belt puller, Model 440 can accommodate tubing and pipe sizes from 3/8-12 in. dia. All continuous, non-marking, poly V groove, 40/50 durometer, solid neoprene traction belts close independently, and standard 3 hp or optional 5 hp AC Flux Vector Drive ensures steady and stable pulling force. Drive train consists of 4-speed transmission, which drives gear reducer on each belt assembly with continuous roller chain.

Russell Finex
Pineville, NC 28134
Mar 16, 2007 Screen Changer accelerates screen changes on sieves, screeners, and separators while reducing risk of operator injury and mesh damage. With portable design and built-in, rechargeable power pack, unit enables mesh screens to be changed by single operator without manual lifting or additional tools. It lifts up to 4 decks simultaneously, with or without deblinding devices, and allows bottom screen to be changed without disassembling decks above it.

Automated Control Systems, Inc. (ACS)
New Haven, IN 46774 1362
Apr 05, 2004 Wyndmaster 348 consists of fully automatic, 8-reel take-up that can be used with any product strip up to 3 in. wide and any reel diameter up to 30 in. It uses 4-position horizontal indexer with 2 reels at each position and receives product at speeds to 600 ipm. Features include paper interleaf operation, tangential feeder, and automatic sample strips with programmable length. Changeover is timed at 1 min between overwind and underwind mode.

Kreyenborg Industries
Lawrenceville, GA 30045
Jul 29, 2003 Valuline dual-piston screen changers are offered in 4 sizes for up to 8 in. extruders. Seal-less systems feature double filtration area for filtration of polyolefins, styrenes, and other non-technical polymers. They complement complete line of custom discontinuous, continuous, and automatic back flushing systems, which are suitable for demanding extrusion, compounding, and polymer applications.

Dynisco Extrusion
Hickory, NC 28602 4244
Feb 06, 2003 Model EM-10 manually actuated, 2-cavity, discontinuous slide plate screen changer targets extruder sizes from ¾â€“4.5 in. dia. With leak-free performance to 10,000 psi, bolt through design incorporates 3-position handle. Model MSDP-050/006 extrusion melt pump offers 0.1 cc/revolution, and is suited for medical extrusion processes. MSDP 050 and 090 series pumps employ bearing and gear design that is suited for processes requiring enhanced thermal and color dispersion.

Automated Control Systems, Inc. (ACS)
New Haven, IN 46774 1362
Jun 28, 2002 Wyndmaster 324 incorporates 4-reel operation with side-by-side reel design, which allows machine to operate with both single strip and dual strip processes. It can function in both overwind and underwind mode. Machine can be programmed to operate with varying sizes of stamped parts, and up to 100 programs can be saved and protected with password. Motorized tangential feeder uses horizontal and rotational movement to follow reel diameter as it fills with product.

Engineering By Design
San Jose, CA 95131
May 09, 2002 Machine resizes plastic coated, braided tubing with heated die, checks for exposed wires, and cuts sections to any length. Hot die is located between two independent pinch drives. Each pinch drive is electronically geared to programmed speed or input from upstream size feedback. It has alphanumeric color touch screen for menu-selectable die heat, cut length and relative speeds for each pinch drive up to 750 fpm.

Malcom Co., Inc. (Distributor of LEISTER Hot Air Tools)
Tiverton, RI 02878
Dec 11, 2001 Leister Hand-Held Plastic Extruders feature maximum molten output temperatures of 550°F, which are adjustable to ±2°F. They provide cold start protection, have dial selectable temperature settings, heat up fully in 3 minutes, and measure actual molten plastic in real-time. Units output 1/4 to 13 lbs per hour. They also feature 360° welding shoes and digital display of actual and set values.