California Micro Devices
Milpitas, CA 95035
Mar 11, 2009 Incorporating PicoGuard XS architecture, which integrates inductors with ESD diodes, ExtremeESD® CM1235 and CM1236 feature 8 channels of ESD protection that meet 8 kV contact discharge requirements of IEC61000-4-2 standard, while also meeting 100 W differential impedance matching requirements of HDMI(TM) 1.3a and DisplayPort(TM) digital video standards. Housed in 16-pin TDFN package, devices are suited for digital TVs, LCD displays, notebooks, and Blu-Ray recorders/players.

MKS
Andover, MA 01810 2449
Feb 11, 2009 Intended for printing and coating processes, ION POWER(TM) HL-Type Static Neutralizers feature 8200 MANAGER Master Controller, which can monitor and control up to 9 static neutralizing stations. Controller uses 2-wire RS-485 bus to communicate with all 8155 POWER MODULES on network, and can display performance and diagnostic parameters for each system. Rated for Class I, Div 1 and 2 and Group D areas, neutralizers control static charges over range of 8 in. and at web speeds over 2,000 fpm.

Newson Gale, Inc.
Lakewood, NJ 08701
Feb 06, 2009 Bond-Rite EZ self-testing, portable static grounding and bonding assembly is offered with heavy-duty stainless steel clamp to promote long-term service in any application where permanent ground connections would be impractical. Jaw grip enables clamping onto virtually any surface, including field-installed grounding rods. Clamping mechanism, combined with sharp tungsten carbide tooth contact points, penetrate through build-ups of coatings, corrosion, and other insulating deposits.

JDV Products, Inc.
Fair Lawn, NJ 07410
Feb 06, 2009 Weighing only 7.07 oz, G7-E trigger features LED light for visibility in tight areas or less than ideal lighting environments. It has 12 cfm of air flow at 80 psi, and high voltage alarm to indicate need of maintenance. Other features included are built in transformer, and slim power cable. Accessories included are 6.35 mm quick connect adapter for hose connection to tip, 24 V power supply, needle replacement tool, and brush attachment for removal of debris from work piece.

Newson Gale, Inc.
Lakewood, NJ 08701
Jan 16, 2009 Bond-Rite EZ comes equipped with heavy-duty stainless steel clamp fitted with jaw grip able to clamp onto virtually any surface. It is available with with 10, 16, or 32 ft retractable Cen-Stat® cables, or with portable cable reels with up to 100 ft capacity. Flashing green LED indicator signals existence of safe connection to ground. Product is approved as Intrinsically Safe by FM and CSA for Class I, II & III, Div 1 & 2, hazardous locations.

EXAIR Corporation
Cincinnati, OH 45249-1621
Jan 12, 2009 Using small amount of compressed air to entrain room air, Super Ion Air Wipe provides uniform 360° ionized airstream that clamps around continuously moving part to eliminate static electricity and contaminants. Featuring all aluminum construction, unit comes in 2 in. diameter with air consumption of 30 scfm and 4 in. version with air consumption of 50 scfm when powered at 80 psig. Wipe is suited for removing dust, particulates, and shocks on pipe, cable, extruded shapes, hose, and wire.

3M Company / Electronic Products Division
Austin, TX 78769
Jan 08, 2009 Offered in versions to accommodate 8.5 x 11 in. documents (5410) and A4 paper sizes (5411), Static Dissipative Sheet Protectors are made from polypropylene plastic and measure 2 mm thin. Non-stick plastic means ink from photocopies will not adhere to sheet protectors. ESD protective symbol identifies sheet protectors as static-dissipative, and embossed pattern reduces glare.

STMicroelectronics
GENEVA   Switzerland
Dec 22, 2008 Featuring 0.18 sq-mm footprint, ESDALCxx-1U2 Series includes 3 models with breakdown voltages of 3.9, 6.1, and 14.2 V. All can survive multiple strikes up to IEC61000-4-2 Level 4, which specifies contact-discharge pulse of 8 kV and 30 A surge current. When ESD pulse occurs, diode protects chips from pulse energy by diverting surge current to ground and clamping voltage spike to low level that IC can safely tolerate. Diodes are suited for mobile phones, GPS receivers, and MP3 players.

MKS
Andover, MA 01810 2449
Dec 18, 2008 Leveraging Virtual AC(TM) modular and plug-and-play design, ION POWER(TM) system enables absolute static control management on all web converting applications. Intelligent system neutralizes over range of 30 in. and at web/material speeds exceeding 3,000 fpm. In addition to 8001iP static neutralizing bars, MPU-controlled 8100 POWER MODULE and 8200 MANAGER Master Controller are included. To aid integration with machinery via industrial networks, 8300 COMMUNICATOR modules are also included.

MKS
Andover, MA 01810 2449
Nov 25, 2008 Featuring Modulated Pulse technology, AeroBar® MP Model 5625 eliminates static charge in advanced flat panel display manufacturing processes. It lowers swing voltage, minimizes discharge times, and prolongs cleaning cycle times. High frequency sine wave technology produces continuous, high level of ion generation, which modulated pulses harvest and transport to target. Adjustments to frequency, voltage, and balance provide range of performance settings to meet exact requirements.

Newson Gale, Inc.
Lakewood, NJ 08701
Nov 17, 2008 Earth-Rite PLUS(TM) grounding indicator system assures low-resistance path to ground to dissipate static electricity when transferring flammable liquids or powders. It includes retractable, 32 ft coiled grounding and monitoring cable, color coded blue for intrinsic safety, and which is chemical- and abrasion-resistant. Quick-Connect feature allows field replacement of cable or optional wide-jaw HD heavy-duty SS ground clamp that connects to all common tanks and vessels.

TAKK Industries Inc.
Cincinnati, OH 45247-2238
Nov 13, 2008 Available in variety of lengths from 10-110 in., IonStorm XR2 emits pulsing waves of ions from dedicated negative and positive emitters, propelling ions towards static-charged surface. This neutralizes charge on surface, resulting in shockless pulsed dc ionization system. With lockable settings, voltage, frequency, and polarity of ion stream can be adjusted. Multiple IonStorm XR2 units can be connected and powered by single standard electrical source.

Newson Gale, Inc.
Lakewood, NJ 08701
Oct 31, 2008 Using intrinsically safe circuitry, Earth-Rite TELLUS detects positive ground connection in common types of flammable and/or combustible gases. Unit enables compliance with guidelines of NFPA 77 and CENELEC 50405 for controlling static circuitry, by ensuring equipment is monitored to levels recommended by these standards. Earth-Rite TELLUS is suited for grounding applications where flammable or combustible liquids or powders must be transferred, mixed, or blended.

ION Industrial
Windsor Locks, CT 06096
Oct 01, 2008 Featuring solid-state engineering, ION POWER(TM) Virtual AC(TM) Static Neutralizers come in plug-and-play communication/control modules and static bars that connect to industrial networks or automated machinery. Units are suited for web converting and plastic bag making applications with ability to neutralize static charges from over 30 in. away and on webs moving over 3,000 fpm. To integrate neutralizers with machinery, 8300 COMMUNICATOR modules connect 8100 POWER MODULES to industrial networks.

Panasonic Electric Works Corporation of America
New Providence, NJ 07974
Aug 21, 2008 With built-in fan and ac adaptor, SUNX ER-TF Series Wide Area Static Ionizer allows for self contained installation without need of external power supply or compressed air. It features swivel air outlet for free control over direction of ionized air and quick change needle discharge units for cleaning. Unit has photoelectric finger detection system, eliminating risk of shock. It is available in 400, 600, and 800 mm sizes, each with charge removal time of 1 sec (±1,000 to ±100 V).

PB Swiss Tools
Gainesville, GA 30501
Jul 25, 2008 With soft handle surface that ensures secure grip even if hands are wet, SwissGrip® screwdrivers transfer rotational forces of the hand to screw, maximizing torque. Compact 8215 ESD Screwdriver Set includes ESD handle and precision screwdrivers. Designed to check screw tightening torques for assembly operations, 8315A ESD Torque® Handles come with preset torque setting range of 10 cNm to 5 Nm, which can be adjusted according to specific requirements.

ON Semiconductor, LLC
Phoenix, AZ 85008
Jul 11, 2008 Capable of clamping input ESD waveform of 15 kV to less than 7 V in matter of nanoseconds, Models ESD7L5.0D and NUP4212 protect ESD sensitive ICs. Offered in 1.2 x 1.2 x 0.5 mm SOT-723 package, ESD7L5.0D protects 2 high speed data lines at 0.5 pF capacitance/line as well as D+ and D- lines of USB2.0 port. Available in 1.6 x 1.6 x 0.5 mm UDFN-6 package, NUP4212 protects 4 high speed data lines at 0.7 pF/line and 2 Vcc power lines as well as D+, D-, and Vcc line on 2 USB ports.

STMicroelectronics
GENEVA   Switzerland
Jul 10, 2008 From 2.42 x 1.92 x 0.65 mm flip-chip package, EMIF06-AUD01F2 implements complete EMI filtering and ESD protection for stereo headset output and external/internal microphones. Audible handset demodulation noise is eliminated by achieving -25 dB attenuation throughout stop-band 800-2,480 MHz using high-density 1.3 nF PZT capacitors on microphone lines. ESD protection is achieved via combination integrated TVS diodes, low-inductance packaging, and Z-R-Z pi-filter topology.

STMicroelectronics
GENEVA   Switzerland
Jul 10, 2008 With 0.85 pF maximum capacitance at 240 MHz, Model USBULC6-2M6 minimizes distortion and helps designers meet 10 pF maximum specified line loading for operation up to 480 Mbps. Protecting high-speed USB, including Vbus, it meets IEC61000-4-2 level 4 specifications to 15 kV air-gap discharge as well as 8 kV contact discharge, and has breakdown voltage of 6.1 V. Device features low maximum leakage current of 0.5 µA to reduce power consumption and preserve battery life.

California Micro Devices
Milpitas, CA 95035
Jul 08, 2008 Based on coupled inductor design, Praetorian® III LC filter architecture utilizes 6-pole pi-filter topology and enables design of filters that can fit into small form factor, 0.4 mm pitch uDFN and chip scale packages. Filters, optimized for inductance and capacitance (down to 10 pF), promote attenuation and signal integrity. Products based on this architecture address EMI filter and ESD protection (to 15 kV) requirements found in handset designs.