New Curing Systems Products

UV LED Systems target pinning and curing applications.

Available in wavelengths of 365, 385, 395, and 405 nm, FireEdge™ FE300 Systems are intended for high-power pinning and full-curing of adhesives, coatings, and inks. Scaling feature allows air-cooled units to be stacked end-to-end with contiguous, uniform UV output. Various optical features can be ordered to shape UV light for edge curing/banding while exhaust air is directed away from substrate...

Gestamp Wind Steel Chooses IDPSA to Robotize the Processes for Applying Coatings on Turbine Tower Sections in Its Production Plants

Thanks to this framework agreement, the manufacturer of wind turbine towers will achieve an increase and optimization of production at its plants through the automation using robots for the processes of application and curing of coatings for wind turbine tower sections. Madrid, Spain - Gestamp Wind Steel, a division of Gonvarri Steel Industries (Gestamp Corporation) chose IDPSA to robotize its...

Horizontal Conveyorized IR Oven is used for preheating, curing.

Featuring electric IR or gas catalytic IR heaters and controls, Horizontal Conveyorized Infrared Preheat and Curing Systems are designed for preheating or curing liquid and powder coatings on range of products processed horizontally. Complete insulated oven enclosure offersÃ- options for side and bottom heat as well as room for integral supply or recirculated air plenums. System can be used...

3D UV Curing System can be customized to suit application.

Able to dry coatings in minutes, Ecocure light oven can be customized to meet end-user demands concerning number of lamps required to cure customer's part. Electronic timer-controlled unit - available in 120 V version on wheels for portability or 220 V, single-phase model - has filtered air cooling system and part rotator. Offering one-button operation, system is not dependent upon computer and...

Choosing an Optimal Riot PPE Supplier: 5 Key Factors

This ebook provides 5 key factors to choosing an optimal riot PPE supplier.

Air-Cooled LED Curing Lamp has compact, 185 cm-³ design.

Air-cooled RX FireFly 2W is suited for small format printing and adhesive industry segments requiring rapid curing of heat-sensitive substrates. Curing power is provided by 2 W/cmÃ-² UV irradiance and lamp offers spot curing capability with 25 x 10 mm emitting window. Unit can be set up using single connector for both data and power cables.

LED Spot Curing System offers high intensity output.

Comprised of LED light source, LED controller, and interconnecting cables, LoctiteÃ-® CureJet(TM) 405 LED safely and immediately cures UV- and visible light-cure adhesives. Source provides 1.1 W/cmÃ-² output over 0.38 in. dia cure area, and controller can be actuated by external signal or footswitch. Operated in timed or continuous-duty modes, stackable solution offers instant on/off...

Pulsed UV Curing System suits in-line printing.

Replacing continuous wave mercury UV, CoolCureXLÃ-® RC-801 Curing System features pulsed UV light, which provides instant on/off control and low heat. It consists of lamp housing, controller, and power supply. Producing less than 300 Ã-µs pulses, system does not create or use VOCs, and lets OEM or integrator set UV dose from 10-100%. It can be made with custom designed lamps to match...

UV Light Curing Conveyors handle large parts.

Available with 18 or 25 in. wide UV curing lamps, WIDECURE(TM) conveyors can be outfitted with longwave or shortwave bulb. Lamp height can be adjusted to accept parts from 5-12 in. high, and tightly controlled line speeds are adjustable in 0.1 fpm increments from 1-50 fpm; faster conveyors are also available. Integral shielding eliminates stray UV light that might otherwise reach operator. Uses...

UV Curing System meets Blu-Ray Disc(TM) manufacturing needs.

CoolCureXL RC-801 Curing System employs pulsed UV light that provides 1,000 w/cmÃ-² peak pulse power to penetrate and completely cure 100 Ã-µm thick transparent protective layer on Blu-ray discs. Featuring spiral lamp to match footprint of 12 cm dia. discs, modular system can be integrated into any in-line process for manufacturing 3G optical storage media. System, comprised of lamp...

LED Curing System offers 365 nm curing capability.

Suited for bench top and automated UV curing applications, SpotCure-B6 is available with 2 interchangeable light probes to cure UV adhesives in 365 and 395 nm ranges. In automatic operation mode, light activates ON when probe is removed from holder, and OFF when replaced in holder. Light delay of 1.5 sec allows accurate positioning of 12 mm light probe over work area, while selectable 10 sec...

Von Ruden's Driven Tools Are Built to Last

Von Ruden's driven tools are designed to each specific machine in order to maximize performance. All of our tools are performance tested and made in the USA per ISO 9001:2015 standards. Check out our video to learn more.