Henkel Loctite Corporation
Rocky Hill, CT 06067
Jul 05, 2006 Equipped with internal cooling fan, Loctite® 7700-HD LED Light Source portable curing system offers output of 1.0-1.5 W/cm² at peak wavelength of 405 nm and provides effective continuous duty cycle use. Powered from ac power adapter, hand-held or stationary mount system features extended tip for use on small adhesive joints. Sized at 9 x 1.4 x 2 in. and weighing 0.75 lb, unit may be actuated using foot switch, PLC interface cable, or timer.

Xenon Corp.
Woburn, MA 01801 1057
Apr 20, 2006 CoolCureXL RC-801 Curing System employs pulsed UV light that provides 1,000 w/cm² peak pulse power to penetrate and completely cure 100 µm thick transparent protective layer on Blu-ray discs. Featuring spiral lamp to match footprint of 12 cm dia. discs, modular system can be integrated into any in-line process for manufacturing 3G optical storage media. System, comprised of lamp housing, separate controller, and power supply, produces under 300 µsec pulses.

Kinetic Instruments, Inc.
Bethel, CT 06801
Dec 13, 2005 Suited for bench top and automated UV curing applications, SpotCure-B6 is available with 2 interchangeable light probes to cure UV adhesives in 365 and 395 nm ranges. In automatic operation mode, light activates ON when probe is removed from holder, and OFF when replaced in holder. Light delay of 1.5 sec allows accurate positioning of 12 mm light probe over work area, while selectable 10 sec timed cycles up to 60 sec and manual mode allow accurate control of curing time.

Xenon Corp.
Woburn, MA 01801 1057
Dec 02, 2005 Designed for integration into in-line manufacturing process, Xenon CoolCureXL RC-800 Series Curing System features high-intensity, pulsed UV lamps with single- or dual-lamp operation, controller that provides instant on/off, and power supply. Modular system permits top-down and bottom-up curing configurations. Suitable for chemistries that absorb light at 180-1,000 nm, UV process does not create or use VOCs and produces peak pulses less than 300 µs, 1,000 W/cm².

UV Process Supply, Inc.
Chicago, IL 60614-4805
Oct 13, 2005 CON-TROL-CURE® Wide Area Flood Curing Lamp casts even irradiance over wide area. Placed at distance of 3 ft from material to be cured, unit projects effective cure area of greater than 5 x 5 ft. Fitted with adjustable lamp holders, housing accommodates lamps with total power from 250-1,000 W. Built in cooling system supplies correct amount of airflow to keep lamp at stable temperature. Lamp can stand on floor or be mounted on wall or ceiling.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Aug 30, 2005 Designed to provide rapid tack-free cure cycles, Loctite® ZETA® 7760 is equipped with 200 W HPMA lamp that outputs up to 20 W/cm² of UV light at 250-410 nm. Single light source can power up to 4 separate cure areas. Intended for spot curing applications, system performs best on cure areas up to ½ in. in diameter. It can be operated manually or using timed shutter light exposure from 0-99.9 seconds.

Xenon Corp.
Woburn, MA 01801 1057
Aug 06, 2004 With compact, modular design, Xenon PWB (printed wiring board) Pulsed UV/Visible Curing System employs pulsed UV/visible light to cure multi-film flexible circuit boards without damaging products. Mercury-free system features serpentine lamp, with 1 x 3 in. optical profile, that produces peak power from 405–1,811 W/cm². It provides instant on/off and can be mounted onto stationary or moving equipment. System includes power supply and controller.

Opto Technology Inc.
Wheeling, IL 60090 6056
Aug 05, 2004 Using 50 die in TO-66 package, Model OTLH-00280-UV offers peak wavelength at 375 nm with radiant flux of 254 mW when driven at max peak current of 300 mA. UV Shark package provides standard half max viewing angle of ±54°. Array is suitable for fluorescence excitation or absorption, document validation, and UV curing of acrylates used in adhesives, polymers, and ink curing applications. Collimating optics and custom lenses are available.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Jul 29, 2004 Able to cure various UV- and visible light-cure adhesives in seconds, hand-held Loctite® 7700(TM) offers typical output of 500 mW/cm² at wavelength of 405 nm. Portable curing system measures 9 x 1 x ¾ in. and weighs less than 0.5 lb. Suited for applications in crowded or hard-to-reach areas, unit may be powered via rechargeable batteries or ac adapter. LED technology allows product to deliver instant on/off performance and consistent light output.

Research, Inc.
Brooklyn Park, MN 55428
Jun 08, 2004 DryIR® Model 6040 concentrates IR heat directly to desired area, resulting in immediate evaporation. Designed for drying applications that require clean, responsive, non-contact heat source on target areas up to 4 in. wide, IR energy emitted from each heater can be adjusted to match specific heating requirements. Featuring modular construction, air-cooled unit incorporates digital power controller, aluminum construction, integral fan, and quartz lamps.

Henkel Loctite Corporation
Rocky Hill, CT 06067
May 04, 2004 Loctite ZETA 7735, designed for ¼-1 in dia spot curing applications, offers up to 7 W/cm² of UV light at 250-410 nm. It uses 50 W metal halide arc lamp with universal power supply and liquid-filled light wand. Lamp, which features elliptical reflector and custom coating, has 2,000 hr life expectancy. System may be operated manually or with timed shutter light exposure from 0-99.9 sec. Selector switch allows use of 110 or 230 Vac options.

Xenon Corp.
Woburn, MA 01801 1057
Mar 02, 2004 CoolCureXL-DVD® Bonding System features pulsed UV curing lamps capable of 0.6 sec cure times for DVD-5 formats. Tilt management is achieved using lamps on top and bottom during curing process. Eliminating need for DVD repositioning while curing, system uses spiral-shaped lamps that match DVD profile and expose full disc to 1,000 W/cm² peak pulse power. Pulsed UV curing lamps provide instant on/off and cool operation.

Xenon Corp.
Woburn, MA 01801 1057
Jan 16, 2004 Xenon RC-742 Pulsed UV Curing System features instant ON/OFF and is capable of producing 1,000 w/cm² peak power to provide penetration and curing in less than 0.5 sec with minimal heat, depending upon application. Suited for chemistries that absorb light at 180–600 nm, modular pulsed system consists of power supply, controller, and xenon lamp module. It operates without magnetron, can be ozone-free, and cures products from micron size to 2 m long.

Fusion UV Systems, Inc.
Gaithersburg, MD 20878
Nov 25, 2003 PowerCure® 1, measuring 1 in., features cooling system that enables lamp head to operate without external blower. Compact power supply can be placed at any convenient location. Absence of electrodes in bulbs maximizes UV output and spectral consistency over time. PowerCure 1 is suited for micro-assembly applications such as electronics and medical devices, or for applications requiring automation of concentrated curing in several localized spots.

Fusion UV Systems, Inc.
Gaithersburg, MD 20878
Nov 25, 2003 Light Hammer® 10 consists of 2 modular components: microwave-powered irradiator and solid-state power supply. Operating at 600 W/in., 10 in. multi-lamp system provides remote monitoring and access via built-in communications software that operates using industry-standard communication protocols. Electrodeless bulb with elliptical reflector provides UV irradiance for cure and reduces infrared emissions. Power output is adjustable from 35-100%.

Dymax Corp.
Torrington, CT 06790
Aug 07, 2003 Ultraviolet CURE ZONE 2 and CURE ZONE HO2 are equipped with shielded, hinged access doors and height adjustable, replaceable work surfaces and provide complete viewing of curing process. With 11 x 10 in. footprint, CURE ZONE HO2 models have 5 x 5 in. curing area and emit 120 mW/cm² of curing power, while CURE ZONE 2 models have 8 x 8 in. curing area and emit 80 mW/cm². Systems are capable of curing most UV adhesives between surfaces from 1–5 sec.

U.V. Process Supply, Inc.
Chicago, IL 60614 4805
Apr 10, 2003 Cure Tunnelâ„¢ utilizes 4 asymmetrically mounted lamps to provide curing power to substrate. Each 400 W/in. lamp is fixed at 45° angle. Lighting, combined with housing geometry, enables unit to exhibit satisfactory cure at speeds exceeding 350 ft/min when running at half-power (200 W/in.). Dual-lamp layout and 10 in. focus allow for air circulation. System is capable of curing heat sensitive substrates such as plastic and PVC.

A.W.T. World Trade, Inc.
Chicago, IL 60641
Mar 13, 2003 Accu-Cureâ„¢, with computer-designed cooling system, minimizes level of heat transmitted to stock in curing chamber. Operators adjust gate height on curing head module according to stock thickness, eliminating light leakage. Due to variable position wattage selection of 300, 200, or 100 W, users can also adjust lamp output to conditions. Ozone Removal System safely vents ozone and hot air, while light guards protect against UV and visible band light and absorb lamp heat.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Sep 09, 2002 ZETA® 7730 offers up to 4 W/cm² of UV light at 320 to 410 nm, delivering tack-free surfaces when used for light-cure adhesives. System utilizes auto-ranging 60 to 265 Vac, 50 to 60 Hz solid-state power supply, 50 W metal-halide lamp, and liquid light guide. Typical cure area is 0.5 in. diameter. Exposure time is controlled by programmable timed mode (0 to 99.9 sec) or manual mode, where shutter remains open as long as foot switch is depressed.

Dymax Corp.
Torrington, CT 06790
Aug 13, 2002 BlueWaveâ„¢ 200 W UV spot/wand light, fitted with rod lens assembly, provides uniform illumination for curing adhesives and coatings from .75 x .75 up to 5 x 5 in. Rod lens No. 38699 cures adhesive or coating areas from 3/4 in. square at 1,500 mW/cm² to 2 in. square at 115 mW/cm². Rod lens No. 38698 cures adhesive or coating areas from 2 in. square at 125 mW/cm² to 5 in. square at 32 mW/cm².