AGY    Aiken, SC 29801
Sep 21, 2010 Using proprietary new glass formulation, S-1 HM(TM) glass fibers feature 90 GPa tensile modulus and are suited for use in wind turbine blade applications. High-performance rovings, otherwise optimized for tensile strength, compressive strength, and compressive modulus, are fatigue resistant and come in various yields for epoxy and polyester resin systems. Direct roving product form is tailored for standard conversion to unidirectional fabrics and prepregs and multiaxial fabrics.

JM Science, Inc.    Grand Island, NY 14072-0250
Sep 21, 2010 By combining 1 additional Karl Fischer station with volumetric or coulometric module, AQUACOUNTER® Karl Fischer Volumetric Titrator AQV-2200S enables 2 different measurements to be performed simultaneously. Titration cell requires only 20 mL of titration solvent for accurate measurements. Current status, data, and function keys are displayed on 7.5 in. color touch screen, and result data can be viewed on browser. With USB flash memory, users can save and load parameters and results.

Enviro Petroleum Corporation    Orlando, FL 32819
Sep 20, 2010 Enviro Plus(TM) can help reduce emissions and opacity while optimizing performance and yield of fuels used by fuel terminals, power plants, and commercial/maritime vessels. Specifically, this liquid catalyst ensures fuels burn in less time and more completely. This results in more energy to drive piston and less lost as heat or pollution. Product can be used to enhance any type of fuel, including gasoline, biodiesel, diesel, maritime, heavy fuel oils, and coal.

Eastman Kodak Co. (Corporate Headquarters)    Rochester, NY 14650-0001
Sep 20, 2010 Available in 35 mm, 120/220, and 4 x 5 sheet format, 400 speed PROFESSIONAL PORTRA 400 Film incorporates KODAK VISION Film Technology, plus Antenna Dye Sensitization in cyan and magenta emulsion layers to achieve fine grain. It also utilizes optimized Emulsion Spectral Sensitivity and Image Modifier Chemistry, proprietary DIR Couplers, and Micro-Structure Optimized T-Grain emulsions. Film is suited for portrait and fashion photography as well as nature and outdoor photography.

MonoSol, LLC    Portage, IN 46368
Sep 17, 2010 Producing high clarity sachets, MonoDose(TM) Crystal(TM) Film is suitable for wide variety of detergents and disinfectants as well as other consumer and commercial chemicals packed in unit doses. When introduced to water, polyvinyl alcohol film completely dissolves and releases product.

Co-Ex Corporation    Wallingford, CT 06492
Sep 17, 2010 Available in sheet sizes of 4 x 8, 5 x 8, and 6 x 8 ft, Macrolux C comes in general-purpose grade clear but can be special ordered to meet exacting specifications. Sheet is suitable for use in variety of applications including machine guards, glazing applications, thermoformed parts, and any application requiring light transmission and clarity combined with high impact strength.

Daimer Industries Inc    Woburn, MA 01801
Sep 17, 2010 Heated and powered with electricity, Vapor-Flo® 8940 does not generate any pollutants while producing pressures to 2,175 psi and water flows to 2.0 gpm. Pressurizing systems incorporate commercial duty 4.0 hp motors, continual use water pump units that offer direct drive, and 2.5 ft long trigger arms with proprietary fast coupling/uncoupling engineering. Product supports dual-temperature modes, with cold water cleaning and up to 175°F hot cleaning.

Sidel, Inc.    NOrcross, GA 30092
Sep 16, 2010 Bottle Switch(TM) improves blow molder flexibility by reducing mold changeover time in order to adapt to accelerated product changeover times on filler. Less than 1 min is required to change mold, reducing machine downtime while helping to avoid investment in storage silos or intermediate palletization. Semi-automatic solution places required blowing station directly in front of operator, who is only required to change molds. Removal/installation in mold support units is tool free.

Fischer Elektronik GmbH und Co. KG    Lüdenscheid   Germany
Sep 15, 2010 Consisting of special graphite powder that is integrated into organic matrix, WLPG Graphite Thermal Transfer Compound features heat conductivity of λ = 10.5 W/mK. Product is free from silicone and synthetic oils or substances, and is electrically conductive and usable at temperatures from -40 to +320°C. Compound is supplied in plastic syringes containing 2, 5, 10, or 20 ml.

Fischer Elektronik GmbH und Co. KG    Lüdenscheid   Germany
Sep 14, 2010 Demand for power transistors to be installed with minimal effort is met by use of cooling aggregates featuring engaging retaining springs for fastening transistors and similar devices. Groove geometry allows safe fastening of transistors on cooling aggregates assembly without screws. There are 5 different clip sizes available for differently sized components, and 3 different voltages of cooling aggregates - 5, 12, and 24 Vdc - accommodate range of applications.

Durex Industries    Cary, IL 60013 2979
Sep 10, 2010 Bonded directly to cartridge heater sheath, Duraslik(TM) Coating acts as corrosion inhibitor and solid lubricant when heater is inserted into drilled hole and energized. Product allows heater to be removed with relative ease after long-term use, provides optimal heat transfer characteristics, and eliminates need for secondary release agents prior to insertion.

Daimer Industries Inc    Woburn, MA 01801
Sep 07, 2010 Using ingredients composed of soy-based compounds, Eco-Green® Grout Sealers preserve grout joints and repel stains and dirt in heavy traffic environments. Products add hard, protective coating to sanded grout lines found in exterior or interior tiling. Scientifically tested and designed to biodegrade rapidly and completely, often in 1 month's time, sealers are suitable for tiled ceiling, floors, walls, and counters in restaurant, janitorial, and food processing industries.

Larson Electronics, LLC    Kemp, TX 75143
Sep 03, 2010 Featuring 4 ft, 4-lamp LED light mounted on stainless steel cart with non-sparking casters, explosion-proof Model EPLC-48-4L-LED is equipped with power cord, wire guard, and explosion-proof switch. Unit provides 96 W of LED power within heavy-duty aluminum housing with Pyrex lens. Light can be positioned to face any angle, including straight up. Carrying UL certification of Class 1, Div 1 and Class 2, Div 1, cart is suitable for environments with hazardous vapors or explosive dusts.

Modern Process Equipment, Inc.    Chicago, IL 60623
Sep 02, 2010 Achieving 80-95% yields on wide range of target sizes, including 20 x 50, 30 x 80, and 80 x 325, Activated Carbon Gran-U-Lizer(TM) produces narrow particle size distribution with minimal fines. Unit adjusts configurations in seconds with touch of button. Offering capacities from 500-5,000 lb/hr, system is suited for coconut, coal, and wood-based carbon products.

Ross, Charles, & Son Co.    Hauppauge, NY 11788 0615
Sep 01, 2010 Laboratory Dual Shaft Mixer is completely enclosed with all components shrouded for safety. Unit includes reverse vertical lift to raise mix can to mixing position as well as inverter duty motors. Self-contained control panel, variable speed controls, and dual-handed raise and lower controls are also included. Unit is designed for mixing variety of medium-to-high viscosity products up to one million cp requiring combination of low- and high-speed agitation.

Pres-On Products, Inc.    Addison, IL 60101
Sep 01, 2010 Based on Nylon 6, N3000 closed cell, cross linked foam comes in 39 x 78 in. sheets in thicknesses ranging from 1/16 to ½ in., and can be specified with or without acrylic adhesive. Product demonstrates virtually no shrinkage when exposed to temperatures up to 410°F for 24 hr. Designed to meet flammability requirements of FMV33 302, N3000 is suited for automotive and industrial seals, gaskets, or thermal insulation that require both high temperature tolerance and chemical resistance.

Supercritical Fluid Technologies, Inc.    Newark, DE 19711
Aug 31, 2010 Modular SFT-150 Supercritical Fluid Extraction/Reaction System can investigate feasibility of applying supercritical fluid techniques to various analyses and processing situations. While basic configuration can be adapted to meet new/evolving application demands, standard stainless steel vessel up to 2 L contains supercritical fluids at pressures up to 10,000 psi. System also comes with 100 ml hand-tight sample vessel and is controlled by air regulator with dial-in pressure control.

Modern Process Equipment, Inc.    Chicago, IL 60623
Aug 31, 2010 Delivering uniform grind in 20 x 100 US Mesh size with minimal dust or by-product, Model 1052 SAP Gran-U-Lizer(TM) includes BAVA Balance and Vibration Analysis, which senses when product moisture levels elevate beyond tolerable range. When this occurs, product becomes elastic and does not grind efficiently. BAVA senses material elasticity change and notifies plant personnel. BAVA can also predict bearing failures before they occur, further optimizing operating efficiencies.

Epson America, Inc.    Carson, CA 90746
Aug 30, 2010 With Brochure and Flyer Paper Matte Double-Sided, small businesses can create professional, double-sided brochures, flyers, calendars, and other marketing materials. Colors and text are instantly dry and smudge-resistant on matte finish. Available in 150-sheet package, heavy-weight, letter-size paper is designed for use with Epson ink jet printers.

Innovative Ceramic Corp.    East Liverpool, OH 43920
Aug 25, 2010 Designed for marking aluminum refractories and ceramic components, 44W402 DuraFire(TM) Marking Ink enables manufacturers to document product history, track product life, and create brand awareness. Water-based ink is environmentally friendly, non-toxic, and non-flammable with zero VOCs. Product cleans up with water, eliminating need for solvents.