Bosch Corp.    Charleston, SC 29418
Feb 01, 2012 Featuring modular, customizable design, Pharmaceutical Melt Extrusion and Calendering Line includes Pharma Extruder WCF 0040PH, which continually processes substrate with active ingredients through melting, mixing, kneading, aerating, tempering, and forming stages. Mass is extruded to Pharma Calender BPK 0050, ensuring accurate forming of tablets by using dual rollers with forming cavities. Pharma Cooling Tunnel BCK 0050 cools by means of contact cooling from below transport belt.

Solutia, Inc.    Saint Louis, MO 63166
Feb 01, 2012 Intended for commercial/residential use, EnerLogic® 70 combines low-e coating, virtually invisible appearance, and visible light transmission of up to 70%. Low-e coating effectively transforms the insulating power of single-pane windows into double-pane and double-pane windows into triple-pane for year-round energy conservation. In summer, heat from sun is reflected away from windows. In winter, radiant heat from home's heating system is directed back into interior.

Adell Plastics, Inc.    Brooklyn, MD 21227
Feb 01, 2012 Designed to minimize interfacial forces between polymers and polymer fillers, Maleic Anhydride-Modified Polyolefins optimize adhesion within composite, while facilitating uniform dispersion and stable morphologies. EK-10-MAH is recommended for coupling of glass and other fillers in polypropylene composites, while KK-10-MAH is suited for coupling of glass, wood pulp, and other fillers in HDPE composites.

Abrisa Industrial Glass, Inc.    Santa Paula, CA 93060
Feb 01, 2012 Chemically strengthened in post-production process that creates deep compression layer on surface of glass structure, High Ion-Exchange Thin Glass offers scratch, shock, and impact resistance. Glass is available in thicknesses from 0.5-2.0 mm, which can be custom-fabricated to meet application requirements. Anti-reflective coatings can be applied for optimized display readability in bright light conditions, whether indoors or outside, in sizes up to 27 in. diagonal.

Steelnor Systems    Midland, ON L4R4K8
Jan 31, 2012 Designed for filling and assembly lines, SS1500T - SSC545 sealer conveyor system is optimized for seal and trim applications. It offer variable speed to 1,100 ipm as well as variable and tamperproof, laboratory quality temperature control. Along with PTFE and fiberglass sealing bands, 5 ft long x 4½ in. wide conveyor features 115 V, 50/60 Hz single-phase operation; stainless steel and anodized aluminum construction; and ability to handle virtually all heat sealable materials.

M-Real USA Corp.    Norwalk, CT 06851
Jan 31, 2012 Kemiart Graph+ (115-250 g/m² / 24-51 lb) and Kemiart Lite+ (130-200 g/m² / 27-41 lb) feature double coating that provides smooth, glossy surface for printability with enhanced ink laydown, color brightness, and detail accuracy. While Kemiart Graph+ has been developed for flexo preprint as well as offset, screen, and water-based inkjet printing, Kemiart Lite+ is designed for flexo postprint. Both suit retail-ready packaging, POS/promotional displays, and other packaging applications.

battenfeld-cincinnati company    McPherson, KS 67640
Jan 30, 2012 Available in 4 sizes with screw diameters of 35, 45, 60, and 75 mm, uniEX Series covers medium-output range from 50-500 kg/hr. Machines can process all known thermoplastic materials, from PVC to polyolefins, as well as thermoplastic elastomers and engineering plastics. Featuring space-saving U configuration, extruders handle melt pressures up to 500 bar and utilize maintenance-free AC motors that minimize energy consumption.

ADG SOLUTIONS    Fairfield, CT 06824
Jan 27, 2012 Ram Stuffer is available with PLC control that maximizes efficiency by eliminating operator adjustments for recyclers of low bulk density polymer scrap. Designed for light feedstocks, ram stuffer has pneumatic reciprocating ram, mounted at feed throat, that stuffs material into screw. PLC control automatically adjusts timing of ram stroke in accordance with variations in extrusion drive amperage caused by material bulk density changes. PLC can be retrofitted on existing extruders.

EXAIR Corporation    Cincinnati, OH 45249-1621
Jan 27, 2012 To prevent jamming, tearing, and shocks, Deluxe Super Ion Air Knife Kits use laminar sheet of air to neutralize static electricity while blowing away dust and particulates from printed surfaces, paper, plastics, and 3-D shapes up to 96 in. across. Units require 3.7 scfm of compressed air/ft of length at 5 psig. Electronic Flow Control turns on air knife only when it is needed. Power supply, EFC(TM), universal mounting system, shim set, filter separator, and pressure regulator are included.

TANAKA HOLDINGS Co., Ltd.    Tokyo   Japan
Jan 26, 2012 Ruthenium Material consists of MOCVD (Metalorganic Chemical Vapor Deposition) film formation material (precursor) used in next-generation DRAM. By using this ruthenium precursor, manufacture of capacitor electrodes can support miniaturization in 20 nm generation and later. High-purity metallo-organic complex, made up of organic compounds and metallic element, enables film formation at 165°C in hydrogen atmosphere and exhibits smoothness with asperity of 1.1 nm or less.

Wilmington Machinery, Inc.    Wilmington, NC 28406 7308
Jan 26, 2012 Available with 4 or 6 cavities, Rotary Blow Molding System is designed with calibrated neck for 3 gallon to 25 L tight drum and jerry can applications. System is completely automated including part handling and trimming. Capable of speeds up to 475 containers/hour or 4 million containers/year, machine targets motor oil, edible oil, chemical, and other large volume liquid product markets.

SPEX SamplePrep LLC    Metuchen, NJ 08840
Jan 26, 2012 Employing design for vigorous up-and-down grinding motion, 2020 Geno/Grinder® integrates with all automated robotic systems and has complete cycle time of 2 min or less. Clamp accommodates various titer plates, vials, as well as all standard SPE plates and is suited for high-throughput processing of samples for isolation of nucleic acids (RNA/DNA), enzymes, yeast, proteins, and bacteria. Samples can be pulverized with or without buffer using variety of grinding media.

KRAIBURG TPE Corp.    Duluth, GA 30096
Jan 24, 2012 Use of Wet Grip elastomer technology, offered under THERMOLAST® W trade name, increases coefficient of friction (COF) in TPE materials for greater degree of grip in dry and wet applications without any negative impact on physical and rheological performance. Wet Grip compounds, which are available in 25-60 Shore A hardness and meet FDA approvals, also enhance surface smoothness, sealing, bonding, transparency, and coloring. They can also be made to adhere to engineering thermoplastics.

Toshiba Machine Co., America    Elk Grove Village, IL 60007
Jan 24, 2012 THL Series SCARA Robots include the THL500, THL600 and THL700 with lightweight die cast aluminum arm lengths of 500 mm, 600 mm, and 700 mm. Each THL offers payload of 10 kg with cycle times of .45 s for the THL500 and THL600 and .50 s for the THL700. Robots feature working envelope of 4 axes, with a Z-axis rotation of 360º. Maximum speeds range from 6.3 m/s to 7.9 m/s overall. TSL 3000 Controller included is USB compatible.

TANAKA HOLDINGS Co., Ltd.    Tokyo   Japan
Jan 23, 2012 After printing circuit on base material using Conductive Silver Ink and exposing it to UV light for 0.3 seconds, user can instantly harden printed film at room temperature to form circuit. At film thickness of 5 µm or more, it is possible to form wiring with electrical resistivity of 10-3 cmW. Wiring can be formed on glass base material and substrates as well as flexible base materials such as PVC film and PET film.

Thermo Fisher Scientific    Portsmouth, NH 03801
Jan 20, 2012 Consisting of open air and incubated bench-top models and incubated or refrigerated floor models, MaxQ® HP shakers provide hard shake for bacteria with speed range from 25-525 rpm. Brushless DC motors allow maintenance-free, 24/7 operation, and programmability includes function that restricts unauthorized/inadvertent changes to key functions. Temperature uniformity is ±0.3°C for incubated bench-top model and ±0.2°C for incubated and refrigerated floor models.

Mitsubishi Heavy Industries America, Inc.    New York, NY 10111
Jan 20, 2012 Eliminating heat stress and strain in bonding process, Bond Meister MWB-12-ST produces 3D integrated LSI (large-scale integration) circuits at room temperature. Fast atom beam (FAB) gun irradiates atoms for activating material surface to bond, and up to 20 ton weight loading is applicable for bonding. In addition to being able to perform wafer transfer and alignment, machine accommodates setting of bonding conditions for individual wafers for production of various types in small lots.

Teijin Aramid    Arnhem   Netherlands
Jan 20, 2012 Consisting of 1,000 filaments, Twaron 550f1000 is suited for soft anti-ballistic products for police, law enforcement, and military markets where trends are toward lightweight bulletproof vests that comply with strict safety regulations. In woven fabric, yarn is suitable for anti-ballistic and anti-stab products. It offers fragment resistance as well as optimized resistance to blast effects of roadside bombs.

Elastocon TPE Technologies, Inc.    Rochester, IL 62563
Jan 19, 2012 Formulated for overmolding onto nylon, Elastocon STK56PA and STK56PA-B feature Shore A Hardness of 60 for soft feel. Products offer impact resistance as well as resistance to many chemicals and household cleaning products. Latex-free, RoHS compliant, reclaimable, and recyclable, TPEs are suited for automotive and non-automotive knobs and levers, electronic component housings, and grips for tools, kitchen utensils, medical instruments, and appliances.

Absolute HAITIAN    Worcester, MA 01610
Jan 19, 2012 Available in 55, 110, and 165 U.S. tons, Zhafir Mercury series is comprised of tiebarless, all-electric machines that use side plates to create maximum mold space. Symmetrical design maintains platen parallelism with clamping force focused on center of platen, and toggle clamp mechanism is engineered with 2 levers and central servo direct drive for smooth, dynamic movement. With 3 screw drives and 3 screw diameters, injection unit configuration is flexible to meet molding project demands.