Michelman Inc.    Cincinnati, OH 45236
Oct 26, 2009 Water-based Michem Guard 7140 large particle emulsion optimizes rub and abrasion resistance in pigmented and semi-gloss coatings, inks, and OPVs at very low addition rates of 2-5%. It can also be used to matte coatings and varnishes to smooth satin finish at 5-10%. In addition, Michem Guard 7140 may be added to coatings that go on exterior wood and wood composites, interior furniture, and flooring.

Z Corporation    Burlington, MA 01803
Oct 22, 2009 ZPrinter® 350 converts 3D data into physical models, with 0.8 in./hr vertical build speed, 8 x 10 x 8 in. build size, and 300 x 450 dpi resolution. Automated system can print multiple models simultaneously and enables printing of complex geometries and intricate details. Controlled from desktop and printer, it also includes automatic material loading and snap-in binder cartridges. Unit recycles unused build material, provides dust control, and produces no liquid waste.

Solutia, Inc.    Saint Louis, MO 63166
Oct 20, 2009 With light transmittance level of 0%, Vanceva Absolute Black adds privacy and balance to interior and exterior laminated glass applications. Opaque PVB-based interlayer can be used as single layer in glass laminate or combined with colored interlayers. Applications range from residential doors, side-lites, and transoms to kitchens and baths, partitions, and conference rooms.

Albemarle Corp.    Baton Rouge, LA 70820
Oct 15, 2009 Ketjenfine® 868 nickel-molybdenum catalyst is designed to maximize performance of vacuum gas oil (VGO) hydrocracking pretreatment performance. It is suited for VGO units where both high aromatics saturation and hydrodenitrogenation activity are required. Catalyst serves to optimize cycle length and maximize throughput for refiners.

MO BIO Laboratories, Inc.    Carlsbad, CA 92010
Oct 13, 2009 Optimized specifically to protect microbial RNA in soil and sediment samples, LifeGuard(TM) Soil Preservation Solution puts microbes into stasis immediately upon contact and keeps sample stable at ambient temperature. Product enables researchers to collect soil samples in remote locations without RNA degradation or changes in transcript levels during transport to laboratory for microbial community analysis and metagenomics.

Momentive Performance Materials    Strongsville, OH 44149
Oct 12, 2009 Available in high consistency rubber and liquid silicone rubber, silver-based StatSil Elastomers offer built-in antimicrobial protection making them suited for medical, pharmaceutical, cosmetics, and food industries. Products offer resistance to chemicals, provide biocompatibility, are virtually odorless, and are available with many international recognized approvals such as USP Class VI, ISO 10993, BfR and FDA.

Select-Arc, Inc.    Fort Loramie, OH 45845-0259
Oct 08, 2009 Developed for welding applications requiring corrosion and oxidation resistance, SelectAlloy 82-AP features weld metal composition of 19% chromium, 3% manganese, 2.5% niobium, and nickel balance. It is utilized for welding alloys 600, 601, and 800 to themselves, for clad side of joints in steel clad with nickel-chromium-iron alloys and for dissimilar welding of nickel-based alloys. Electrode suits applications in wide range of temperatures as well as chloride contaminated environments.

Guill Tool & Engineering Co.    West Warwick, RI 02893
Oct 08, 2009 Designed to handle exotic materials such as bioplastics, composites, and advanced polymer blends, Model 1025 serves medical, automotive, and specialty packaging industries. Unit yields 8.5-10 in. of core diameter and is available in single-layer, multi-layer, multiple stripes, co-extrusion, triple extrusion, spiral, and split flow designs. Heat distribution is achieved via band, cartridge, or coil type heater. FeatherTouch alignment helps avoid parison curl, curtaining, and webbing.

Objet Geometries Inc.    Billerica, MA 01821
Oct 08, 2009 With TangoBlackPlus, designers and manufacturers can create parts that closely resemble broad range of rubber products. Material offers flexibility, optimal elongation and break, and resistance to tear. Black in color, product is suited for creating models of products in automotive market, defense industry, and shoe industry. It will also help development of soft-touch grips, handles, gaskets, and seals.

Automated Packaging Systems Inc.    Streetsboro, OH 44241
Oct 07, 2009 EarthAware(TM) bag film material is 3-layer coextruded film that is manufactured with various resins, for sealing, strength, and security. Featuring flat white exterior finish, film is available in 2.5, 3.0, and 3.8 mil thicknesses. It can be produced as Autobag® preopened bags-on-roll and SidePouch® bags-in-box in range of sizes. Mailbags with film contain additive causing biodegradation in 9 months to 5 yr and incorporate protective reinforced side seals.

Flexicon Corporation    Bethlehem, PA 18020 8006
Oct 07, 2009 Designed to loosen bulk solid material that has solidified during storage and shipment, Bulk Bag Weigh Batch Eductor System discharges material by weight and blends it into liquid stream. Skid-mounted system incorporates 2 Bulk Bag Unloading Frames, each with integral Bulk Bag Conditioner comprised of hydraulic pump and 2 rams with contoured end plates that press opposing sides of bulk bags. Cantilevered hoists and motorized trolleys allow conditioning of bulk bags at various heights.

Franklynn Industries, Inc.    Cincinnati, OH 45140
Oct 07, 2009 Designed to increase production efficiency by enhancing tire molding process, DiamondKote(TM) has water-based formulation that exhibits durability and promotes overall cavity lube consumption. Reduced spray frequency also promotes output in-between applications, minimizing downtime. Other effects include reduced build-up of lube, rubber remnants, and other contaminants on mold surface, which lends to extended intervals between scheduled mold cleanings.

Pregis Corp.    Deerfield, IL 60015
Oct 06, 2009 Used in conjunction with AirSpeed HC air pillow machine, HC Renew(TM) consists of low-density polyethylene film with up to 10% recycled content. Cushioning structure features rows of small air-filled pockets available in ¾, 1, and 1¼ in. cell heights. Utilizing organic additive to accelerate microbial biodegradation without compromising recyclability, HC Renew does not contain heavy metals or salts and will not begin to biodegrade until it is disposed of in microbe-rich environment.

Dow Corning Corp.    Midland, MI 48686 0994
Oct 06, 2009 Reactive silicone glycol surfactant with carbinol functionality, Dow Corning 55N provides abrasion resistance, leveling, and slip to clear and pigmented paints, coatings, and inks without generating excessive foam or compromising gloss or clarity of finished coating. Low VOC additive performs well in water-based, solvent-based, and UV-curable systems and is compatible with wide range of resins, including alkyd, acrylic, epoxy and polyurethane.

Master Bond, Inc.    Hackensack, NJ 07601
Oct 05, 2009 Thermal adhesive film FL901AO provides heat-transfer path between heat-generating components and heat sinks or other cooling devices. Curing in 1 hr at 250°F or 30-40 min at 300°F, B-stage adhesive-preform features thermal conductivity on level of 10 BTU-in/ft²hr°F and volume resistivity exceeding 10 x 10¹² W-cm. Properties are maintained over temperature range of -100 to +400°F. It is also resistant to thermal shock, vibration, and impact.

Techcon Systems    Garden Grove, CA 92841
Oct 05, 2009 Accommodating all standard size cartridge kits ranging from 2.5-20 oz., TS6500CIM Series provides automatic mixing of 2-component material. Mixer is equipped with automatic fluid level sensing device and electronic control system. Automatic injection feature provides even distribution of hardener into resin during mixing cycle to ensure uniform mixed result, while high torque motor maintains speed to allow for continuous mixing of high viscosity material.

SureCrete Design Products    Dade City, FL 33523
Oct 05, 2009 Xtreme Lightweight Series is blend of cement with lightweight aggregates and reinforcing fibers. Fireproof, termite-proof, and mold-resistant, it can be cut, trimmed, nailed, molded, and formed into any shape. Product also allows any finish or any texture of wood or stone to be simulated; it attaches to gypsum, wall board, and concrete block, wood, and metal and can be stained, painted, or colorized throughout mix.

VisEn Medical, Inc.    Bedford, MA 01730
Oct 02, 2009 ReninSense680(TM) FAST imaging agent measures and monitors key hypertension and renal disease biomarker in vivo. Based on Fluorescence Activatable Sensing Technology platform, it is biologically targeted NIR activatable imaging agent designed to measure renin activity as part of renin-angiotensin biologic pathway. Allowing localized in vivo measurement of changes in renin-angiotensin system function, agent is suited for research and drug development.

Bekaert Specialty Films    San Diego, CA 92123-4359
Oct 02, 2009 Designed to insulate electronics and protect photovoltaic cells from environment, Solar Gard PV T Series provides moisture barrier, solar resistance, and dielectric strength. Backsheets come in 2 thicknesses for different electrical insulation performance, and are available in roll form that fits wide range of photovoltaic panel sizes and configurations.

Legacy Industrial, LLC    Port Murray, NJ 07865
Oct 01, 2009 HyperPatch(TM) lets end-users apply heavy-duty repair patch, indoors or outdoors, that will be ready to walk on within 1 hr. It comes in 2 gal container, which includes urethane liquids, trowel-grade sand, and complete instructions. Once mixed, material can be hand-troweled at recommended ¼ in. thickness. Areas of use include hallways, food service areas, laboratories, showers areas, food processing, hospitals, manufacturing plants, sidewalks, and dock areas.