Teknor Apex Co.    Pawtucket, RI 02861
Dec 14, 2010 Available in compounds and masterbatches, Thermoplastic Starch and Polypropylene Blends provide physical properties comparable to virgin PP. Terraloy® BP-13020 ready-to-process compounds are blends of 25-30% TPS and 70-75% PP, of which 70-75% is recyclate. Terraloy® MB-13020 masterbatches have 35-50% TPS content and up to 50% recyclate. Both are suited for injection molded consumer products; extruded sheet, profiles, and tubing; and blow molded jars and bottles.

STMicroelectronics    Lexington, MA 02421
Dec 14, 2010 Housed in 3.3 x 1.5 x 0.6 mm package, Model HSP06-8M16 provides 15 kV ESD protection meeting IEC 61000-4-2. Unit features 100 W differential impedance, 0.6 pF input/output capacitance, and 6.3 GHz bandwidth, which is compatible with HDMI, DVI, LVDS, Diiva, DisplayPort, USB3.0, and SATA interconnects. Providing 8 channels of protection, device minimizes slowing of data edges and prevents signal skew between adjacent lines to prevent communication errors.

Milliken & Co.    Spartanburg, SC 29304
Dec 10, 2010 In addition to optimizing transparency of optics, Millad® NX8000 Clarifier helps processors cut temperatures and cycle times. Tunable property of product puts clarity and gloss levels in polypropylene on par with other glass clear polymers and glass itself. Specifically aimed at extrusion blow molding, Millad NX8500E allows processors to optimize surface properties as well as bulk haze. Additive provides step change in optical properties with standard Ziegler-Natta PP EBM resins.

Surface Guard, Inc.    Aurora, IL 60504
Dec 10, 2010 Surface Guard® 123 series provides temporary protection for variety of surfaces, including smooth and lightly textured types, during processing, assembly, and shipping. Polyolefin film is coated with blend of aqueous adhesives, and its properties enable hybrid masking capable of handling water/condensation, heat, and high surface energy. Typically supplied on 1.5-3 mil PE films, with clear and tinted films available, product comes in lengths to 15,000 ft and widths from 1-80 in.

IBM Corp.    Milwaukee, WI 53202
Dec 06, 2010 Incorporating electrical and optical devices on same piece of silicon, CMOS Integrated Silicon Nanophotonics increases computer chip performance by using light pulses for communication. This technology can be produced on front-end of standard CMOS manufacturing line and will increase speed and performance between chips. Density of optical and electrical integration allows single transceiver channel, with all accompanying optical and electrical circuitry, to occupy 0.5 mm.

ACPO, Ltd.    Oak Harbor, OH 43449
Dec 03, 2010 Resistant to acids, chemicals, and oil, N21010 consists of 1.0 mil Clear BOPP non-topcoated face combined with emulsion acrylic overlaminating adhesive and .92 mil polyester release liner. Aesthetics eliminate concern for fish eyes and deliver optimal wet out, while adhesive is engineered for short term re-positionability and ultimate adhesion to variety of substrates. Product is suited for use in booklet applications as well as dark and metalized substrates.

Epoxies Etc.    Cranston, RI 02921-3407
Dec 01, 2010 Designed to cure at room temperature, 2-component 20-2125 Potting, Encapsulating, and Casting Resin cushions and protects sensitive electronic components while imparting very little stress on components during cure or thermal cycling. Hardness can be modified by changing mix ratio of Polyol and Isocyanate. Moisture-resistant with low toxicity, product can be used in wet environments and minimizes employee exposure to dangerous chemicals.

ICL-IP America INC    St. Louis, MI 63141
Dec 01, 2010 TexFRon(TM) products are water-based dispersions designed to meet flame retardant requirements for range of fabric finishes. TexFRon 9025 and 9020 are soak-and-wash-durable FR coating and back-coating formulations, while TexFRon P and P+ are based on acrylic co-polymer emulsions with chemically-bound bromine. Latter products enable production of FR cotton, polyester, and cotton/polyester fabrics durable up to 50 laundry cycles.

W. Amsler Equipment Inc.    Richmond Hill   Canada
Nov 30, 2010 Designed for manufacturers of PET containers, preform cooling system utilizes increased air flow in oven to minimize surface temperature of perform, resulting in minimal temperature differential and stress throughout perform. System also aids production of colored bottles. It includes IR short-wave emitters and plenum in which air flow through plenum slots cools each perform directly. Integrated filtered air supply minimizes power consumption.

EXTRUSION DIES INDUSTRIES    Chippewa Falls, WI 54729-1443
Nov 29, 2010 Available with external cooling option, EPC(TM) Die incorporates deckle system that can be adjusted to minimize formation of edge bead, which wastes polymer and substrate as it is trimmed from web. External deckle prevents leakage, while internal deckle has independently adjustable components that seal off ports of internal flow channel. To clean away carbonized polymer that causes die lines, operators can retract external and die-gap deckle components and insert brass scraper.

Innovative Polymers, Inc.    St. Johns, MI 48879
Nov 29, 2010 Polyester polyol-based polyurethanes of HP-1000 Series are Shore A hardness systems with 1:2 resin to hardener mix ratios and gel times under 25 min at room temperature. Elongations range from 660%-800%, and tear strengths are rated up to 325 pli. Polyether/polyurea polyol hybrids of HP-2100 Series, which include 3 Shore A systems and one Shore D material, exhibit abrasion resistance with as low as 3 mg loss. Elongations vary from 280%-990%, and tear strength ratings are up to 643 pli.

Pregis Corp.    Deerfield, IL 60015
Nov 23, 2010 Made from kraft paper (linerboard) and water-based adhesives, NaturePlank(TM) offers brand owners and fabricators paper-based protective packaging alternative. Strength and blocking/bracing properties suit range of applications and provide all-natural alternative to petroleum-based plastic plank products. Made with SFI®-certified, renewable virgin and post-consumer recycled fibers, planks measure 108 x 48 x 1 or 2 in. and can be converted into desired shape for application.

Creative Materials Inc.    Ayer, MA 01432
Nov 23, 2010 Available as 2-component system, 125-26A/B119-44 adheres to variety of substrates, including ITO-coated surfaces and other low surface-energy substrates. Electrically conductive product is resistant to scratching and creasing and is capable of screen printing circuits with fine-line widths and spaces as small as 50-75 microns. With minimal sensitivity to handling, abrasion, and solvents, RoHS-compliant ink is suited for touch screens, solar cell circuits, and RFID applications.

Lectro Engineering Co.    St. Louis, MO 63132
Nov 22, 2010 Using servo-driven dual gripper hand design to minimize linear motion on all servo-driven moving assemblies, Model MTM 2001D comes equipped with Allen Bradley PLC, Allen Bradley servo motion control system, and HMI color touchscreen with self-teaching setup mode. Recipe system is capable of 99 alphanumeric recipes, and self-diagnostic screen facilitates troubleshooting. Featuring heavy-duty linear rail design, takeaway system comes with mobile main cabinet control cart.

Transilwrap Co., Inc.    Franklin Park, IL 60131
Nov 22, 2010 Printed on surface using UV litho, screen, or digital print processes, Recyclable Clear Polypropylene creates eye-catching 3-D visuals for point-of-purchase, packaging, signage, publishing inserts, direct mail, cards, and other printed material, boosting impact of message. Promotions containing dimensional graphics are effective in grabbing viewer's attention and reinforcing brand recognition. Available in 2 sheet sizes, product can be trimmed, cut, and glued.

Outokumpu Technology, Inc.    Jacksonville, FL 32216
Nov 22, 2010 Containing 85% recycled content, 100% recyclable LDX 2404® has PRE value that indicates optimal corrosion resistance. It does not require any hazardous coatings and can withstand salty atmospheric conditions. Properties also help reduce weight of structures and lower energy consumption in transport and construction. Potential applications include bulk liquid storage tanks, road and rail tankers, pulp and paper machinery, and water treatment facilities.

Epoxies Etc.    Cranston, RI 02921-3407
Nov 19, 2010 Formulated to cushion and protect sensitive electronic circuits, components, and devices, Green Potting and Encapsulating Compound is moisture-resistant and imparts very little stress on components during cure or thermal cycling. Raw materials are listed under different FDA CFR 21 Sections, allowing use in applications where there is direct food contact. Base Natural Oil Polyol is obtained directly from plant source without chemical modifications.

Control Co.    Houston, TX 77258 8307
Nov 18, 2010 Blending natural hair, synthetic conductive fibers, and conductive composite handle, Static-Away(TM) Brush dissipates static while whisking away harmful dust, lint, and dirt from work environment. Because it will not scratch critical surfaces, brush is suited for cleaning film, slides, optics, cuvettes, balance pans, microscopes, electronics, and computer monitors. Brush comes in 4 sizes and handle lengths; long handle models access difficult places and eliminate possibility of hand touching.

Michelman Inc.    Cincinnati, OH 45236
Nov 18, 2010 Designed for printing on HP Indigo WS6000 label and package digital printing press, DigiPrime 6029 produces optimal ink transfer, ink adhesion, and rub resistance on embossed and heavily textured, pressure-sensitive label stock. Forty-eight percent of active raw material in DigiPrime 6029 comes from renewable sources and product is also solvent-free, odorless, and repulpable.

Henkel Corporation    Rocky Hill, CT 06067
Nov 17, 2010 Designed to meet UL-674 requirements for explosion-proof motors, Loctite® E-40EXP(TM) maintains more than 85% of its compression strength following exposure to 13 harsh chemicals. Two-component compound is used to pot and seal wire conduits, isolating electric motor from hazardous vapors and chemicals that could cause explosion. Curing in approximately 2 hours at room temperature, material will not expand and experiences very little shrinkage, facilitating accurate dispensing.