Victrex plc / Victrex USA Inc.    Greenville, SC 29615
Aug 08, 2002 PEEK-HTâ„¢ polymer is suited for applications requiring high-temperature resistance. With glass transition temperature of 315°F and melting temperature of 703°F, semi-crystalline, unreinforced polymer offers chemical resistance and Rockwell (R-scale) Hardness of 108.2. Tested and proven in down hole and sub sea environments, it offers long-term creep and fatigue resistance over its temperature range.

Voltek Div. Of Sekisui America Corp.    Lawrence, MA 01843 1089
Aug 08, 2002 Tough enough to suit low profile mounting applications, Volara HPT foams can also replace screws, rivets, and pumpable (caulk) adhesives in various assembly applications. Roll lengths of 4,500 ft can be produced without gauge banding, resulting in fewer roll changes for converters. HPT foams range in thickness from 0.012 to 0.075 in., and densities range from 8 to 20 lbs/ft³. Standard widths are 56 and 60 in., with custom widths available.

Telsmith, Inc.    Mequon, WI 53092
Aug 05, 2002 Heavy-duty horizontal shaft impactors are built for maximum reduction in single-stage crushing in hard stone, secondary aggregate, and primary or secondary asphalt and concrete recycle applications. They are available in 7 sizes with capacities from 80 to 660 tph. Each model has high-chrome alloy hammers that are abrasion-resistant. Rotors are hard-surfaced in critical wear areas, and thermal stress relieved.

Surftran    Madison Heights, MI 48071 1612
Aug 05, 2002 STORM Aqueous Cleaning System measures 26 x 72 x 96 in. with stainless steel construction. Sealed single processing chamber accepts stainless steel parts holding basket and has load capacity of 350 lbs. Functions include wash, rinse, heated deionized water rinse, jet spray, immersed turbojet spray, and hot air drying with 750 cfm Paxton supercharger, which produces 40 kW of forced hot air induction. System includes Allen Bradley touch-screen PLC with multiple program capacity.

Dyneon LLC    Oakdale, MN 55128
Aug 01, 2002 Speckled Dyneonâ„¢ Custom PTFE Compounds are produced by mixing PTFE with inorganic or organic fillers, which improve wear and abrasion resistance, reduce deformation under load, and add color. Compounds are offered in free-flow and pre-sintered grades. Speckled parts feature temperature resistance up to 500°F.

Hosokawa Bepex Corporation    Minneapolis, MN 55413-2810
Jul 31, 2002 Under Water Crystallizer is designed for continuous, large-scale processing of sticky, slow-to-crystallize copolymer pellets that tend to agglomerate between glass transition point and final crystallization point. Water provides heat transfer and promotes uniform heating of pellets while lubricating pellets to keep them from sticking or agglomerating.

Master Appliance Corp.    Racine, WI 53403
Jul 31, 2002 Ultratorch Model UT-35 soldering iron, heat tool, and torch features gas catalyst and iron plated corrosion-resistant heat tip that heats up quickly. Adjustable temperature control assures predictable, repeatable temperatures and quickly regulates power equivalent to 20-60 W electric soldering iron. Chisel type, 1.6 mm preheat tip and protective cap come standard.

Guyson Corporation of U.S.A.    Saratoga Springs, NY 12866
Jul 31, 2002 Cell-Mate 200 is fitted with carousel return-to-front conveyor. It is built on rigid steel chassis with fork lift channels for relocation. Stainless steel fabrication of solution tank and process chambers provides resistance to corrosive, aqueous chemistries. High-impact, V-spray nozzles surround component in first process chamber, while second chamber utilizes multi-adjustable air knives that deliver heated, turbo-blown air.

Buschman, An FKI Logistex Co.    Cincinnati, OH 45246 4845
Jul 26, 2002 Photo-Eye Accuglide Plus Conveyor, operating at standard speeds of 240 fpm, provides quiet operation. It has UHMW track for roller chain, with urethane driver pad allowing for zero-pressure accumulation and smooth, continuous product flow. Non-contacting, photo-eye sensors eliminate noise created by product impact against mechanical sensors and allow rapid, damage-free handling. Sensors have no minimum weight limitations and minimum product height of only 1 in.

EFD Inc., Solder Paste Group    Lincoln, RI 02865
Jul 24, 2002 SolderPlus with WS421 flux offers aggressive flux chemistry that provides suitable bonding strength for mechanical assembly applications. Available in lead-free and tin/lead solder paste alloys, it is prepackaged in EFD syringes for precise application with automatic dispensing equipment. Solder paste works successfully on hard-to-solder materials such as stainless steel 304 and 316, Nichrome, and oxidized surfaces.

Lee Industries, Inc.    Philipsburg, PA 16866
Jul 23, 2002 Tri-Mix Turbo-Shear, for bio-pharm and cosmetics industries, combines scraped-surface, counter-rotating, double-motion agitator and independent, bottom-center mounted, homogenizer head. Agitator handles products up to 2,000,000 cp. Head accepts various disperser designs. Unit handles products up to 10,000 cp alone and viscosities to 50,000 cp and beyond with scraper agitator.

Pressure Island    Menlo Park, CA 94025
Jul 22, 2002 Rotary Basket Washer System is available in single or multi-stage configurations with manual or automatic load and unload systems. Basket system can be designed to accommodate various part sizes and geometries. Stainless steel tanks and enclosures provide durability and chemical resistance. Available heating systems include electric, gas, or steam. Standard units come in 2, 4, 6, 8, and 12 basket configurations.

Entek Mfg., Inc.    Lebanon, OR 97355
Jul 22, 2002 E-MAXâ„¢ 27 mm twin-screw extruder is self-contained and requires only one power connection. Heating/cooling systems, as well as PLC are mounted under extruder in water and dust resistant enclosures. Stainless steel exterior protects machine from corrosion. E-MAX includes AC vector drive system and Allen-Bradleyâ„¢ PLC equipped with optional Ethernet for remote monitoring and troubleshooting.

Kreyenborg Industries    Lawrenceville, GA 30045
Jul 19, 2002 Extrusion/Filtration System, designed for polypropylene co-extruded flat film production, utilizes RS Series back-flush screen changer combined with GPE Series melt pump to provide 700 kg/hr extrusion output and 31 micrometer particle size filtration. Automatic air ventilation action of changer and metering effect of pump provide ability to run production through back-flush and screen change with no loss in quality. Screen includes profibus connections.

Arnco    South Gate, CA 90280
Jul 18, 2002 RePneu® flatproofing polyurethane fill provides heat resistance, medium tire deflection, improved tear strength and compression set, and softness of 28 durometer. It is suitable for heavy construction and earth moving equipment. Applications include construction, mining, material handling, ground support, roofing, and lawn and garden industries.

CDG Technology, Inc.    Bethlehem, PA 18015
Jul 17, 2002 Thermally stable Saf-T-Chlorâ„¢ provides safety under extreme upset conditions. It will not undergo runaway decomposition, even when exposed to intense, direct heat source such as flame. Saf-T-Chlor cartridges are supplied in DOT-approved containers, available in full range of sizes. They are factory-sealed and require no direct contact with chemical by customer personnel.

Mi-T-M Corporation    Peosta, IA 52068
Jul 17, 2002 Typically used for pretreatment of emulsified oils, ECL Series has flow rate of 5 gallons per minute. It features 230V, single phase, 20 amp electrical motor with .75 hp pump and 175 gallon cone tank. It is also suitable for removal of suspended solids, removal of complex organics, and destruction and removal of bacteria, viruses, and cysts.

NEST Technologies / PORTEC North America    Studio City, CA 91604
Jul 17, 2002 METAPOR materials are based on formulation of metal or ceramic powders and epoxy binders. They are highly machinable and produced in plate form in range of standard sizes. METAPOR BF 100 AL is aluminum based and offers temperature resistance up to 230°F. METAPOR BF 210 AL is aluminum based and can be used in temperatures up to 460°F. METAPOR MC 100 AL is aluminum based and highly porous. METAPOR CE 100 WHITE is ceramic based for humid or wet environments.

Master Appliance Corp.    Racine, WI 53403
Jul 16, 2002 Microtorch Model MT-76K can be used to heat parts, ignite materials, melt plastic, shrink tubing, solder and desolder, and terminate specialty connectors. Kit includes butane powered soldering iron, microtorch, and flameless heat tool plus hot knife tip, shrink attachment, polyfoam cutter, 5 in. wire cutter, 5 in. needle nose pliers, 60/40 solder, and sponge, all packed in durable plastic case. Refillable fuel tank has capacity of 120 min on full charge.

Davis-Standard, Killion Specialty Systems    Pawcatuck, CT 06379
Jul 16, 2002 Design of Sterling Blow Molding accumulator head offers optimal parison wall distribution by balancing delivery of material around head. Streamlined flow channels and elimination of stagnation points enhances head purgability, resulting in faster color changes. Overlapping spiral geometry minimizes temperature and flow variations while eliminating knit lines within finished product.