Saint-Gobain Performance Plastics, Attachment Tapes, Sealants & Gaskets    Granville, NY 12832-1699
Apr 09, 2003 Korel® micro-cellular .3–1.0 mm gauge foams resist compression set even in elevated temperatures. They facilitate assembly of parts with variable dimensions and will absorb thermal expansion and contraction. Foams are offered on PET liner that adds stability and aids in die-cutting. They are suitable for demanding telecommunications gasket and sealing applications.

Retsch, Inc.    Irvine, CA 92614
Apr 09, 2003 Suited for use with sieve stacks from 4–16 in. in diameter, AS 400 employs careful circular motion for use with coarse particles and grains of oblong shape. All parameters are digitally controlled, and users can save up to 9 combinations for routine sieving processes. Unit may be switched to acceleration mode and can be recalibrated. Interface allows for integration of unit in sieving process controlled through EasySieve® software.

Graco Inc.    Minneapolis, MN 55440
Apr 08, 2003 Reactorâ„¢ E-Series proportioner for spraying plural components such as polyurethane foam and polyurea is for insulation and waterproofing applications. Digital controls provide diagnostics and ratio assurance to simplify operation. Features include digital pressure control, reduced pulsation, improved pump loading, and balanced feed pressures. Temperature-sensing capabilities provide accurate heating.

Kason Corporation    Millburn, NJ 07041
Apr 08, 2003 VIBROSCREEN® Flo-Thru low profile screener features Air-Lift device that allows rapid disassembly, cleaning, inspection, and screen changes. Two unbalanced-weight gyratory motors are mounted on opposing exterior sidewalls, reducing minimum height requirement. Design allows vertical alignment of top inlet and bottom outlet, permitting material to descend through screen in straight-through path at high rates. Diameters range from 18–24 in.

Jensen Fabricating Engineers, Inc./JENFAB    Berlin, CT 06037
Apr 08, 2003 LeanClean Model 24 Oscillating Basket Washer features easy front load and unload design. Parts are thoroughly cleaned as they oscillate back and forth through high power spray and dry system. Bottom tanks are sloped for 100% drainage. Stainless steel system offers programmable Wash/Rinse/Dry cycle, adjustable spray headers, lift out chip collection baskets, large rear access door, fork lift pockets, and removable rear and side panels.

Nex Flow Air Products Corp.    Williamsville, NY 14221
Apr 04, 2003 Air Blade Ionizer removes dirt and static charge from plastic parts. Product comes with fully shielded cable and repairable power supply. Optional static bar with three times nominal output eliminates static on difficult, highly charged surfaces. Ionizer is available in anodized aluminum or stainless steel for high temperature and food grade applications. Additional static bar is offered for wash-down applications.

Philadelphia Mixers    Palmyra, PA 17078 9518
Apr 03, 2003 CF Counter Flow Mixer Impeller promotes strong up and down pumping action, while helping to control Weissenberg (shaft climbing) effect of fluid being blended. Mixed axial and radial flow allow it to operate at high impeller to tank ratios. Impeller is suitable for high viscosity polymer blending applications.

Shuttleworth, Inc.    Huntington, IN 46750
Apr 03, 2003 Constructed of stainless steel, Easy Cleanâ„¢ conveyor has no horizontal surfaces to collect contaminants. Rollers utilize custom compound co-polymer that inhibits spread and growth of bacteria, mold, mildew, and yeast. Anti-microbial properties stem from use of AgION silver-based additive which fights Listeria and other harmful bacteria. Rollers also offer lubricity and reduced wear. Additive is approved for food contact by EPA and FDA.

Saint-Gobain Performance Plastics, Omniseal    Garden Grove, CA 92841
Apr 03, 2003 OmniFlexâ„¢ Fluoroelastomer material exhibits nearly equivalent performance to perfluorelastomer material in chemical resistance and inertness, yet has softer durometer and improved compression set. It offers low temperature performance down to -70°F and operates up to maximum temperature of 424°F. Special shapes can be manufactured to typical dimensional tolerances.

IKA Works, Inc.    Wilmington, NC 28405-7419
Mar 31, 2003 Mixer, with integrated speed control, employs variable frequency drive that mounts directly onto motor. Mixer is operated by hand-held unit, which controls all processing functions. Modular, belt drive system connects AC motor and mixing chambers, allowing each mixer to operate at identical tip speeds. Unit has double mechanical seal, four interchangeable mixing tools, up to three stages, and seven mixing head options.

Graymills Corporation    Chicago, IL 60613
Mar 31, 2003 Tempest 20 Aqueous Jet Spray Cabinet Parts Washer features stainless steel work chamber measuring 36 x 38 x 28 in. and handles loads up to 500 lb. It includes roll out, 20 gal, stainless steel cleaning solution reservoir; reusable 110 mesh filter, and 1500 W electric heater. One horsepower pump generates 600 psi through hand-held adjustable spray nozzle and strips deposits from intricate passages. Fluid is continuously filtered to trap chips and other solids.

TMP, Technical Machine Products    Cleveland, OH 44102 4431
Mar 27, 2003 Model VMX removes moisture, entrapped air, and volatiles present in compounds. Combining heat and vacuum system, unit is suitable for use with hygroscopic and non-hygroscopic resins. It features hardened mixing rotors and abrasion hardened stainless steel mixing chamber with leak-proof construction. Mixing chamber tilts for quick discharge and cleanout. VMX Mixer comes in 5 L lab models, and in 35, 55, 75, 110, and 200 L production models.

Thermal Ceramics, Inc.    Augusta, GA 30903
Mar 27, 2003 Ceraboard® consists of 65% silica and 30% alumina with low level of organic binder. It offers high temperature stability, low thermal conductivity, high cohesive strength, and thermal shock resistance. Board can be cut and machined. Maximum temperature rating is 2300°F, and continuous temperature use rating is 2150°F. Standard sizes include 24 x 36 in. and 36 x 48 in. in thickness variations of 0.50, 1.00, and 2.00 in. Thickness tolerances range from ±0.05 in. to ±0.10 in.

Westfall Mfg. Co.    Bristol, RI 02809-2721
Mar 27, 2003 Static Injection Mixer is a fixed plate that installs in-line, and into which one or more fluids are injected and rapidly mixed by combination of alternate vortex shedding and intense shear zone turbulence. It achieves over 98% injected fluid dispersion only 10 diameters downstream from mixer. Unit fits inside mating flange bolt circle of any piping system and comes in PVC, FRP, 316 SST, Titanium, Hastelloy®, and carbon fiber. Sizes range from 2-72 in. dia.

Douglas Electrical Components, Inc.    Rockaway, NJ 07866
Mar 25, 2003 Type DE43874 ceramic potting compound is suitable for applications up to 500°F. It is fire resistant, self-extinguishing, and may be approved for explosion proof applications by UL and other certifying organizations. Viscosity permits penetration of small cavities. Product bonds to aluminum, steel, and copper alloys, enabling non-elastomeric sealing designs. Applications include feedthrus for HVAC compressors, pumps, autoclaves, and solder reflow ovens.

United Grinding Technologies, Inc.    Miamisburg, OH 45342
Mar 25, 2003 In addition to main 5 CNC axes, Rotoline CNC Machines are equipped with CNC steady rest and CNC tailstock support. Steady rest travel is 600 mm, independently adjustable from infeed Z-axis. Tailstock center travel is 660 mm with 450 mm between centers. Z-, W1- and W2-axis travel is either independent or synchronous. Grinding wheel diameter is 150 mm, and 9 kW ac variable speed motor offers steplessly adjustable speed control up to 10,000 rpm.

Spectronics Corp.    Westbury, NY 11590
Mar 25, 2003 ACID-BUSTERâ„¢ eliminates dangerous acid build-up and works with all lubricants and refrigerants. Compatible with hermetic and semi-hermetic compressors, product eliminates need to flush systems with solvents and safely remains in system for preventive maintenance. Available in prefilled, calibrated, 4 and 8 oz cartridges, product is added directly to AC&R systems with BigEZâ„¢ injector. Solution can be injected into pressurized systems while they are operating.

Sealed Air Corp., Packaging Products Div.    Saddle Brook, NJ 07663
Mar 25, 2003 Cellu-Cushion® PB flexible, recyclable foam is made from blended resins and can be laminated to polypropylene or polyethylene materials and body board cores. Suited for packaging glass items, heat-sealable product thermoforms without cracking or tearing in deep draw applications. Impervious to chemicals, foam provides cushioning and surface protection and may be used as reusable automotive/OEM totes or as dividers/partitions in said totes.

Kimberly-Clark Professional    Roswell, GA 30076
Mar 24, 2003 SCOTT® Coreless JRT® Jr. Bath Tissue has no hole and does not employ cardboard core, making it equivalent in length to six standard rolls of bath tissue. Keyless SCOTT Coreless JRT E-Z Load Dispensing System is designed to hold coreless tissue and can be reloaded with one hand; tissue rolls snap in and lock into place. Additional easy-maintenance restroom systems include LEV-R-MATIC® E-Z Load Hard Roll Towel Dispenser and ALL-N-1 Soap Dispensing System.

Spirax Sarco, Inc.    Blythewood, SC 29016
Mar 21, 2003 STVM Silent Type Vortex Mixing Hosedown Station provides instantaneous, temperature-controlled hot water by blending steam and cold water. Thermal element automatically shuts off steam flow if hot water temperature exceeds temperature set point by 15°F. Vortex scouring action helps prevent scaling. Water pressures range from 20–110 psig and steam pressures range from 40–150 psig. Model V150 produces water from ambient to 150°F and Model V180 produces water to 185°F.