Electronics Assembly, Henkel Corporation    Irvine, CA 92606
Apr 01, 2011 Ablestik C100 series conductive die attach films include Ablestik C130 formulation with 30 micron thickness and Ablestik C115 with 15 micron thickness. Suitable for use with die sizes ranging from 1 x 1 mm up to 6 x 6 mm for package types including QFNs and QFPs, films provide optimal wetting ability with lower bonding temperature for stable adhesion strength. This enables adhesion against moisture and MSL Level 2 performance on all leadframe surface finishes.

Huron Technologies, Inc.    Leslie, MI 49251
Apr 01, 2011 Providing smooth defect-free parts that replicate fine surface details of mold, Release Coating 7887 offers dry, tack-free surface feel and resistance to scuff and mar. Water-based product maximizes number of parts that can be made before cleaning molds by minimizing build up through blend of wax and silicone. Desired gloss quality can be specified by customer.

Ensinger, Inc.    Washington, PA 15301
Apr 01, 2011 Stock shapes made using chemical-resistant and radiolucent TECATEC series consist of thermoplastic matrix and woven fabric of carbon fiber bundles. TECATEC PEEK CW50 is manufactured using matrix polymer VICTREX® PEEK(TM), which is then compressed with laminated woven carbon fabric mats. Also available, TECATEC PEKK CW60 consists of polyetherketoneketone matrix (PEKK) laminated with 60% carbon fiber fabric. With 165°C glass transition point, PEKK is resistant to steam sterilization cycles.

Welex Inc.    Blue Bell, PA 19422
Mar 31, 2011 Broadening abilities of thermoformers producing form, fill, and seal containers, 9-extruder, 5-layer sheet extrusion system is intended for production of multi-colored striped sheet for thermoformed yogurt cups. It produces sheet up to 60 in. wide, with thicknesses from 0.020-0.060 in., at rate of 3,000 lb/hr. Also able to run PP, mobile-mounted system features color touchscreen control interfaces, x-ray gauging system, and individual roll drive sheet take-off system.

Sugino Corp.    Itasca, IL 60143
Mar 30, 2011 Comprised of 5 modular and fully programmable machines, JET CLEAN CENTER line is designed for precision washing and deburring of simple and complex parts. Products include CLEANRISER automated Millipore patch reading system as well as JCC drying equipment that uses plant or regenerative air or vacuum technology. Depending on machine, common base, stainless steel enclosure, and internal 3-axis module is used to streamline use of part handling automation.

Solvay Advanced Polymers, LLC    Augusta, GA 30916
Mar 30, 2011 Consisting of medium-viscosity resin, KetaSpire® KT-851 NT is for use in melt extrusion-based wire and cable insulation layers, as well as monofilaments, multi-filament fibers, ultra-thin tubing, and films. Semi-crystalline material allows for production of articles that are low in gel content and other particulate contamination. KT-851 NT incorporates trace level of lubricant dusted on pellets to facilitate conveying in extrusion screws, while KT-851 NL is pure polymer with no lubricant.

Metallized Carbon Corp.    Ossining, NY 10562
Mar 29, 2011 Consisting of silver impregnated, carbon-graphite material, Silver Metcar is suited for DC motor brushes, non-welding electrical contacts, and rotary slip ring brushes used in ships, aircraft, and rail systems that require low electronic interference. Carbon-graphite material delivers self-lubricating properties, while pure silver provides constant electrical conductivity. Corrosion-resistant material cannot melt or weld to another metal surface, but can be silver plated for soldering.

Dow Corning Corp.    Midland, MI 48686 0994
Mar 29, 2011 Dow Corning® 87 and 88 create hydrophobic silicone network in paint that repels water but is permeable to water vapor coming from substrate. Consisting of silicone resin emulsion for waterborne paints, Dow Corning® 87 encourages water beading. When water reduction is primary requirement, Dow Corning® 88, consisting of silane/siloxane blend, can be used in acrylic emulsion paints containing polar solvents and in solvent-based systems. Both are low-VOC, solvent-free, and APEO-free.

Syrris Ltd.    Royston SG8 5HW  United Kingdom
Mar 25, 2011 Offering temperature range of -90 to +250°C and pressure range of 50 mbar to 3 bar, Globe Reactor System enables vessels from 50 mL to 5 L to use common clamp, lid, circulator, and stand. Spring loaded outlet valve eliminates occurrence of leaks, even at temperature and pressure extremes. Available as single, or vacuum jacketed with wide range of stirring options, Globe can be upgraded using Globe Reactor Master for full automation and data logging, or Syringe Pump for automated reagent dosing.

OptiPro Systems    Ontario, NY 14519
Mar 25, 2011 Suited for low, medium, and high volume production of precision optics, PRO 80 Series includes PRO 80G Grinder or GTS with twin-spindle option, PRO 80P spherical polisher, and PRO 80UFF Ultraform Finishing machine for aspheres. Systems are designed with vibration isolated granite core for thermal stability and part-to-part accuracy. Measuring 39.4 x 59.1 x 82.2 in., PRO 80 Series comes equipped with Fagor 8070 CNC machine control with LCD touchscreen monitor.

GE Co.    Southfield, MI 48034
Mar 25, 2011 Helping to optimize desalter performance, Embreak® breakers also help oil refineries reduce nonylphenol ethoxylates. Oil soluble demulsifiers improve crude oil dehydration, salt removal, and effluent brine quality in electrical desalters and similar process equipment. Specifically, breakers dehydrate difficult to treat, light- to medium-gravity crude oils. Resulting process improvements include ability to run at lower injection rates while effectively separating water from oil.

Eastex Products, Inc.    Holbrook, MA 02343
Mar 24, 2011 Suitable for use in finished products, Slip-Not(TM) Anti-Abrasion Grip material features random size dot pattern and soft, supple texture that offers powder-coat finish aesthetic. It performs in wet/dry conditions and can be sewn and sonic- or RF-welded. Available in black and several earthtone colors, PVC-coated fabric exhibits greater than 12,000 Taber Test Revolutions. Washable and waterproof product can be supplied with adhesive on back or laminated to other materials.

Daimer Industries Inc    Woburn, MA 01801
Mar 18, 2011 Featuring 440 V, 50 Hz configuration, Vapor-Flo® 7500 series operates with minimal noise and non-existent fumes. Steel, coil-based heating unit can deliver max temperatures in 15 sec. Portable models 7500, 7525, and 7575, as well as stationary unit 7550, offer pressure level ratings of 130 bar and flow rates of 2.3 Lpm. While entry level 7525 is housed in rust-resistant steel case, other models come in powder-coated housing. All are driven by 50 Hz, 2.0 hp, industrial-duty motor.

United Conveyor Corp.    Waukegan, IL 60085
Mar 18, 2011 Models 4050/6050 condition ash and other abrasive material with water to suppress dust and facilitate transport to trucks and rail cars. While cleaning chains generate contact against ash material, pin-paddles reduce buildup during each cycle stop. Spray nozzles promote water penetration into bed of material for uniform conditioning and can be independently controlled for precise discharge during start up, mixing, and shut down. Shafts and pins use covers made of UHMW PE to resist buildup.

NLB Corporation    Wixom, MI 48393 2824
Mar 17, 2011 Producing water pressures up to 40,000 psi from rotating nozzles, SRT-10-W Crawler removes coatings and scale. It is operated via wireless control by personnel on ground from as far as 1,500 ft away. Moving up, down, and across tall structures, product strips surfaces down to bare metal at reported removal rates of up to 2,000 ft²/day without exposing personnel to risk of falling. It does not use any abrasive and has vacuum recovery to contain water and debris.

Interstate Specialty Products    Sutton, MA 01590
Mar 17, 2011 With tolerances to ±0.005 in., depending upon material, Rotary Die Cut Parts can be kiss cut, provided with zoned adhesives, adhesive lamination, multiple laminations, and other custom requirements. Products are supplied on rolls for machine or manual application processes and come in wide range of rigid, flexible, and foam materials. Produced in mid- to high-production volumes, parts typically include gaskets, seals, conductors, insulators, EMI/RFI shields, filters, and membranes.

Michelman Inc.    Cincinnati, OH 45236
Mar 17, 2011 Made of natural oils and waxes, NatureShield® Emulsions provide water resistance and beading when used in wood, stone, and concrete coatings, stains, and sealants. With light golden tint, NatureShield 30 tung emulsion offers water-resistant finish that does not darken noticeably and provides wet look on stone surfaces. NatureShield 31 anionic emulsion helps prevent wood from swelling in presence of water, while NatureShield 40 film-forming emulsion provides moderate scratch and mar resistance.

OFS FITEL LLC.    Norcross, GA 30071
Mar 14, 2011 Simplifying network design while promoting performance in terms of link distances and spectral efficiency, TrueWave® HD ocean fiber features negative dispersion value of -14 ps/nm-km for transoceanic applications. Product is designed for use in submarine cables engineered for long- and medium-haul ocean repeatered systems utilizing advanced modulation formats in DWDM systems. Fibers are selected to meet specifications for number, color, length, and transmission properties.

UV III Systems, Inc.    Alburg, VT 05440
Mar 11, 2011 Able to dry coatings in minutes, Ecocure light oven can be customized to meet end-user demands concerning number of lamps required to cure customer's part. Electronic timer-controlled unit - available in 120 V version on wheels for portability or 220 V, single-phase model - has filtered air cooling system and part rotator. Offering one-button operation, system is not dependent upon computer and allows installation of replacement bulbs in ~30 sec.

Phoseon Technology    Hillsboro, OR 97124
Mar 10, 2011 Air-cooled RX FireFly 2W is suited for small format printing and adhesive industry segments requiring rapid curing of heat-sensitive substrates. Curing power is provided by 2 W/cm² UV irradiance and lamp offers spot curing capability with 25 x 10 mm emitting window. Unit can be set up using single connector for both data and power cables.