Tra-Con, Inc.    Bedford, MA 01730
Jul 26, 2005 High-viscosity TRA-BOND 216R01 exhibits lap shears of 3,600 psi with room temperature cure and 4,500 psi with 65°C heat cure. Product is tested and certified to requirements of UL94 V-O and is RoHS compliant.

Ross, Charles, & Son Co.    Hauppauge, NY 11788 0615
Jul 25, 2005 Inline SLIM facilitates powder induction into liquid stream. Rotor/stator generator features Progressive Spiral Porting, which produces high flow, high shear, and high level of vacuum within rotor/stator generator. Design enables system to operate without pump, resulting in immediate lump-free dispersion, and elimination of dusting in plant for safer working environment.

Wayne Machine & Die Co.    Totowa, NJ 07512 1825
Jul 22, 2005 Two Extruders are built in Siamese configuration on single satellite table with adjustable height, and are controlled by single remote control panel. They feature double reduction gearboxes with helical ground gearing, 1-piece bimetallic barrels with integral feed sections, and ac flux vector drives. Screw sizes can mix and match between 3/8–2½ in. Applications include dual and co-extrusion of medical and industrial tubing, profiles, rods, strands, and wire insulation.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Jul 22, 2005 One-part Loctite® Nuva-Sil® Silicones cure tack-free in seconds to depth of 2 in. upon exposure to UV or high-power visible light. Translucent in appearance, products offer weather, temperature, and moisture resistance, and will not degrade or yellow on long-term exposure to light. All offer built-in fluorescence detection system that allows automatic quality inspection. These non-conductive silicones are suited for gasketing, sealing, and encapsulating.

Huntsman Advanced Materials Americas Inc.    East Lansing, MI 48823
Jul 20, 2005 RenShape® SL 7585 photopolymer, formulated to release bubbles before processing to increase throughput, is suited for building master models and prototypes. Thermoplastic-like stereolithography (SL) material is clear amber in vat and turns white as it is exposed to laser light used in curing process. After full cure, parts built with material exhibit Shore hardness of 84D, tensile strength of ~8,000 psi, and notched Izod impact strength of 0.68 lb-ft/in.

Acrilex, Inc.    Jersey City, NJ 07305 1122
Jul 18, 2005 Available in 12 standard colors, Acriglas® Pearlescent Series comes in variety of sizes and thicknesses ranging from 1/8–½ in. Sheets can be drilled, routed, laser cut, glued, formed, hot stamped, and silk-screened. Richness and dimension is achieved through combination of pearlescent pigments and special casting process. Acriglas® Sheets are suited for point of purchase displays, store fixtures, furniture, lighting, and architectural applications.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Jul 18, 2005 Hysol® QMI600 semiconductor packaging material provides CTE and modulus to match existing mold compound properties, enabling wirebonds in same size die stack packages to survive thermal cycling. Silica-filled, non-conductive die attach paste exhibits stability at elevated temperatures as well as hydrophobic properties and produces void-free bond lines. Enhanced with pliable polymeric spacers, material transforms into controlled collapse spacer paste.

Servometer-PMG LLC    Cedar Grove, NJ 07009-1239
Jul 15, 2005 Servometer® electroforms are structurally rigid, hollow shells that can be manufactured to any shape or formed to fit specific applications. Made in sizes as small as 0.020 in., with walls as thin as 0.0005 in., products can also be made hermetically leak-tight. Able to be soldered or welded to custom end-pieces, products are suited for implantable medical use as well as industrial, defense, and aerospace applications.

ALLIANCE Manufacturing, Inc.    Fond du Lac, WI 54936 2006
Jul 14, 2005 Aquamaster CD Rotary Drum Systems combine gentle tumbling with high-volume spray to remove coolant, chips, oil, manufacturing soils, and other unwanted contaminants. Standard designs are equipped with heated wash and ambient air blowoff. Auger style rotary drum includes variable speed drive for controlling product throughput. Drum perforations are sized based on part type and configuration, and allow cleaning solution to flush contamination from parts.

DeVilbiss , ITW Industrial Finishing    Glendale Heights, IL 60139
Jul 14, 2005 Maximizing solvent use and minimizing waste, Solvent Saversâ„¢ hose and gun cleaners mix solvents and compressed air to flush paint lines and passages to eliminate chances for color contamination. They reach inside material hose, fluid passageways of spray guns, and other paint equipment, resulting in clean and dry paint paths. In addition to pressure relief valve, products incorporate metering valve that lets users adjust air/solvent mix.

Norplex Micarta    Postville, IA 52162
Jul 13, 2005 Thermoset composite material, Type NP510UD, combines unidirectional glass fabric with epoxy resin system that features Tg of 130°C. It provides flexural strength of 103,000 psi in machine direction and 30,000 psi in cross direction. Tensile strength is 56,000 psi in machine direction, while compressive strength is 43,000 psi in direction perpendicular to laminations. Applications include leaf and vibratory springs in papermaking machines and conveyors.

Indium Corporation    Clinton, NY 13323
Jul 13, 2005 Suited for soldering surface-mount, mixed-technology, and through-hole electronics assemblies, 1075-EXR is water-based and non-flammable, eliminating special storage requirements and minimizing VOC emissions. Product provides surface wetting, eliminates cleaning, and minimizes solder balling. It can also be used for Sn/Pb assemblies.

Blue Blade Steel    Kenilworth, NJ 07033
Jul 12, 2005 Hardened tempered strip steel is offered wound in compact, large-capacity oscillated coils. Singular 2,000 lb oscillated coil contains up to 45 miles of strip material, eliminating frequent line startup and changeover and associated safety issues. Tempered strip steel can be produced with slit, deburred, round, or square edges and wound into oscillated coils, which feed evenly and safely resist spontaneous uncoiling and lash-back injuries.

TAKK Industries Inc.    Cincinnati, OH 45247-2238
Jul 12, 2005 Compatible with power supplies from 4–8 kV, Ion-Edge delivers positive and negative ion output over effective range of 6 in. or greater from target surface. Bar has extruded aluminum and plastic housing with epoxy fill, while compact design permits operation in areas of limited space. Stay-sharp emitters minimize deterioration in performance and, at 3/8 in. pitch, provide field of ionization that allows operation at lower voltage with increased safety.

Nova Chemicals Corp.    Calgary, AB T2P 5C6  Canada
Jul 12, 2005 Offering alternative to polycarbonate, clear ABS, and impact acrylic, ZYLAR® 631 delivers combination of strength and clarity for applications such as medical devices, floor-care appliances, cosmetic packaging, commercial dispensers, and point-of-purchase displays.

Scapa North America    Windsor, CT 06095
Jul 11, 2005 Available in assorted colors, Polyflex 130 and 135 are low-density polyethylene (LDPE) pressure sensitive adhesive films designed for splicing, patching, masking, sealing, and surface protection applications. Highly conformable Polyflex 130 is formulated for surface abrasion and impact protection, and low adhesion to most surfaces allows easy removal. Heavy duty Polyflex 135 features permanently tacky adhesive that bonds well to most surfaces and maintains watertight seal.

Cincinnati Milacron Extrusion Systems    Batavia, OH 45103
Jul 08, 2005 Featuring XTREEM XP touch-screen control with 15 in. color LCD, TimberEx TE125-33 incorporates volumetric feeder, vacuum vent system, and 2 twin-screw side stuffers. Centerline ratio and barrel geometry provide wood/plastic composite (WPC) processors with optimized internal free volume suited for mixing, melting, and devolatilization. Featuring 125 mm bore dia, 200 rpm max screw speed, and 32.5:1 L/D, unit offers modular, segmented barrel and screw replacement.

SIMCO Industrial & Electronics    Hatfield, PA 19440 1998
Jul 07, 2005 Featuring clamshell design, QuadClam and HexClam are 4- and 6-roll contact cleaners that remove particulate from top and bottom web-surface. HexClam is available to 24 in., and QuadClam accommodates 30–60 in. widths. QuadClean and HexClean are 4- and 6-roll assemblies for top and bottom web-surface cleaning. Former is available to 24 in. wide, and latter accepts 30–60 in. widths. Operating at speeds to 500 fpm, products remove particles down to 1 micron in size.

SIMCO Industrial & Electronics    Hatfield, PA 19440 1998
Jul 07, 2005 Capable of neutralizing charged materials traveling up to 2,500 fpm, PerforMAX 3 incorporates bar graph display, status indicator lights, and remote display panel with alarm output. Standard System is suited for remote monitoring and control of ionization performance, while Hazardous Location (HL) System is approved for Classes I, II, and III environments. System eliminates static charges installed 2–10 in. from webs and up to 20 in. on winders.

Holz Rubber Co.    Lodi, CA 95240
Jul 07, 2005 Gorillaâ„¢ Impact/Slider Bars are built to withstand stress and impact generated in transfer area on conveyor system. Belt contact area, manufactured from ultra high molecular weight (UHMW) polyethylene, provides minimal coefficient of friction. Underlying materials are constructed from 55-durometer rubber and heavy-duty aluminum support channel. Available in 48 and 60 in. lengths, products come with mounting hardware.