ITWRansburg Electrostatic Systems    Toledo, OH 43612
Aug 22, 2006 Vector Systems optimize atomization and transfer efficiency through Vector gun design that redistributes pressure in air cap and adjusts balance between atomization and fan air. While reduced-weight design lends to operator comfort and reduces fatigue, weight distribution optimizes balance and ergonomics. Guns incorporate minimal parts for reduced likelihood of failure and maintenance. Oversized, coarse threads for air cap retaining ring and fluid tip optimize durability.

Norplex Micarta    Postville, IA 52162
Aug 22, 2006 Made from epoxy resin and random mat glass substrate, WaveMax(TM) 7000 thermoset composite is suited for high-volume production runs that require solder pallet to maintain strength at temperatures up to 315°C for as many as 5,000 soldering cycles. Ratio of glass to epoxy maximizes flexural strength and rigidity, with flexural strength of 59,000 psi and up to 39,000 psi at elevated temperatures.

Nanophase Technologies Corp.    Burr Ridge, IL 60521
Aug 22, 2006 Produced by NanoArc® Synthesis process using finite particle size control, NanoArc® Nanocrystalline Tin Oxide consists of non-porous, dense, discrete particles with average size of 20 nm. It is available in either aqueous or various organic media at high concentrations. Product is suited for electrical and electronic components, antistatic coatings, polishing of various media, advanced ceramics, and industrial catalysts.

Ticona Engineering Polymers    Florence, KY 41042
Aug 21, 2006 Vectra® V140 and Vectra® V143XL are liquid crystal polymer-polyphenylene sulfide (LCP-PPS) alloy blends that meet needs of electrical, electronic, and industrial components such as connectors, bobbins, housings, switches, breakers, and sensors. Nearly eliminating flash to promote flow at lower injection pressures, products lend strength to thin walls and have mold temperatures of 80-120°C. They are compatible with lead-free solder and retain physical and mechanical properties of LCP and PPS.

Aremco Products, Inc.    Valley Cottage, NY 10989
Aug 18, 2006 Used to produce ceramic parts, Aremcolox(TM) 502-1100 works in oxidizing, reducing, or vacuum atmospheres and will not outgas in ultra high vacuum. Machinable alumino-silicate ceramic exhibits compressive strength of 25 Kpsi, dielectric strength of 100 V/mil, and thermal conductivity of 9.0 BTU-in/hr-ft²-°F. Machined using conventional tooling, product has coefficient of thermal expansion is 2.5 in./in./°F x 10^-6 and does not react with molten metals, salts, or acids.

Microfluidics, Division MFIC Corp.    Newton, MA 02464 9101
Aug 17, 2006 With pressure range of 3,000-23,000 psi and flow rate of 250-600 ml/min, bench-top Microfluidizer® M-110S is suited for emulsions, dispersions, liposomes, cell disruption, and liquid-liquid or liquid-solid processing applications. It features 25 ml stainless steel reservoir with manual priming and purging pressure feed and integral recirculation, removable product-cooling coil and bath, and dual position spool valve with single pass or recirculation mode.

ZIRCAR Refractory Composites, Inc.    Florida, NY 10921-0458
Aug 17, 2006 Consisting of medium-density, fiber-reinforced ceramic composite material with greater than 99% Alpha-Alumina purity, Type RS-99 is suited for Solid Oxide Fuel Cells and setters for P/M and MIM sintering applications. Fired density of 130 lb/ft³ allows it to be machined to tight tolerances with standard tooling. Type RS-99M is highly plastic moldable sheet. Type RS-99W can be moistened with water and molded into desired shape, while Type RS-99R is prefired and unaffected by moisture.

M-Real USA Corp.    Norwalk, CT 06851
Aug 17, 2006 Available in weights from 25-55 lb, Simcastor Flex is single-side coated supercalendered bleached kraft paper used for rotogravure and flexo printing. A safe packaging material, Simcastor Flex is FDA-approved for food packaging and manufactured according to HACCP hygiene standards. Simcastor Flex ES is formulated for packaging that requires extra stiffness.

Adchem Corp.    Riverhead, NY 11901
Aug 16, 2006 Suited for difficult-to-stick surfaces, 2237M exhibits dimensional stability that allows it to be used for stripping and die cutting. It is usable for bonding and laminating variety of substrates, including plastics, metals, papers, and nameplates. Supplied on 74 lb flat liner, product is comprised of ½ mil polyester film coated on each side with 1.74 mils of aggressive rubber-based, pressure-sensitive adhesive.

ZIRCAR Refractory Composites, Inc.    Florida, NY 10921-0458
Aug 16, 2006 Consisting of combination of strong reinforcing fibers tightly bound in alumina ceramic matrix, Type RS-1200 provides thermo-mechanical and electrical insulation in applications with temperatures up to 2,372°F. Product is completely inorganic and contains no asbestos or RCF fibers. It can be machined to tight tolerances with conventional carbide tooling.

Excel Scientific Inc    Wrightwood, CA 92397
Aug 14, 2006 AlumaSeal 96(TM) and AlumaSeal 384(TM) Aluminum Foils feature single-tab-design for protecting samples in microplates during polymerase chain reaction (PCR) gene amplification or cold storage. Pierceable by pipette tips or robotic probes, foil and adhesives tolerate temperatures from -80 to +150°C. AlumaSeal 96 is designed to fit inside raised-rim plates, and both foils are certified free of DNase, RNase, and nucleic acid.

Creative Pultrusions, Inc.    Alum Bank, PA 15521
Aug 14, 2006 Manufactured with SUPURTUF polyurethane matrix, impact- and corrosion-resistant SuperLoc(TM) 1610 Sheet Pile combines benefits of composite materials with ability to be installed with conventional pile driving equipment. Matrix provides abrasion resistance as well as tensile, shear, and flexural strength. Measuring 24 x 10 in., heavy-duty, pultruded composite sheet pile is stocked in dark brown and is also available in optional colors.

Roll-A-Way Conveyors, Inc.    Gurnee, IL 60031 1212
Aug 11, 2006 Roll-A-Way Conveyors are available with black-coated rollers consisting of solid rubber bonded to steel roller. Overall diameter is 1.9 in. and rolling capacity is 290 lb. Used with ¾ in. micro, 1 3/8 in. durable, and 2 in. heavy-duty rollers, white poly-covered models are non-marring and suited for applications with stainless or aluminum products. Orange polyurethane roller covers work with 1.9 and 2.4 in. steel rollers and are suited for delicate applications.

Roland Advanced Solutions Division    Irvine, CA 92618
Aug 11, 2006 Powered by 400 W spindle, MDX-540 SRP® system mills various nonproprietary materials and engineered plastics, such as ABS, Delrin, and nylon, as well as non-ferrous prototypes and molds made of aluminum, brass, and copper. Desktop device comes with SRP Player wizard-based CAM software, which automates prototyping process and generates tool paths. Along with 19.68 x 15.74 x 6.10 in. max work volume, product features optional rotary axis and automatic tool changer.

Lubrizol Corp.    Wickliffe, OH 44092 2298
Aug 11, 2006 Based on active polymer technology, ADDCO® LoMist D reduces mist from coolant used in metalworking applications by up to 60%. After treatment, fewer aerosols form, preventing fluid from breaking up and floating through air. Product has no adverse impact on production, parts quality, microfinish, or wastewater treatment. ADDCO LoMist D can be used in most soluble oils, semi-synthetic fluids, and synthetic fluids.

IKA Works, Inc.    Wilmington, NC 28405-7419
Aug 10, 2006 Accommodating 2-15 mL hermetically sealable disposable sample tubes, ULTRA-TURRAX® Tube Drive offers protection and security for infectious sample materials, toxic, and high-odor substances. Single drive unit can safely disperse, stir, and grind, with no possibility of cross-contamination. Device can be used individually, or configured in series, for applications in medicine, diagnostic laboratories, food testing, and research.

JM Science, Inc.    Grand Island, NY 14072
Aug 10, 2006 AQUACOUNTER® Coulometric Karl Fischer Titrator (AQ-300) features 6 built-in calculation modes to accommodate solid, liquid, and gas samples. In addition to 4 files with preset conditions that can be stored in memory, product can recall data for up to 20 samples. It comes with statistics package with one-touch calculations and has balance and computer interfaces for GLP and ISO documentation. Options include ion exchange or fritless cell system and thermal or impact printer.

Rogers Corporation    Rogers, CT 06263 0188
Aug 09, 2006 Offering high fill/flow version of RO4450B circuit material, RO4450B-dx Bondply is designed to fill high-density designs while still offering thin dielectric spacing. Product consists of glass-reinforced, hydrocarbon/ceramic thermoset suited for multilayer printed circuit boards. Material can be fabricated using standard epoxy/glass FR4 processes.

Kafko International Ltd.    Skokie, IL 60076
Aug 08, 2006 Water-based Oil Eater features industrial-grade HDPE resin tank and is heated to 110°F with 1,000 W heaters for optimal cleaning effectiveness. Workstation measures 24 x 32 x 9 in. and includes two 5-gal pails of cleaner-degreaser. Other key features include separate heater and pump switches with lighted on/off indicators, filter system to prolong fluid life, flexible spigot, flow-through brush, stainless steel work shelf, and GFI for protection.

TecHarmonic, Inc.    San Jose, CA 95119
Aug 04, 2006 Powered by electric heaters that completely eliminate use of methane, Alpine-S is capable of abating all process and PFC gas emissions with destruction and removal efficiencies (DREs) of over 95% for both chemical vapor deposition and etch applications. Flameless, catalytic decomposition reactor operates in range of 850-950°C, while vortex device removes heat, particles and water-soluble acids, and helps to extend preventive maintenance cycle times.