|
|
|
|
|
Materials & Material Processing
(Showing headlines 2061 - 2080) << 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 ...
|
Portable, Automated Wash Station has closed-loop design.Riveer
South Haven, MI 49090
Jul 27, 2007
Completely self-contained, blue and powder-coated steel Typhoon is suited for cleaning small equipment while complying with environmental standards. Pressure washer gun, attached to overhead boom, provides 360° washing access from outside wash rack, and built-in access ramp closes automatically to keep overspray on rack and off shop floor. Grated sump ensures proper performance even on uneven ground, and completely enclosed mechanism is heated to prevent wash water from freezing.
|
 Top-Entering Agitators offer modular design package.Chemineer, Inc., A Unit of Robbins & Myers, Inc.
Dayton, OH 45401
Jul 26, 2007
Model 20 HT/GT agitators include high-efficiency cast gearbox with heavy-duty output shaft and bearings as well as standard cast dry well seal that eliminates lubrication oil leakage from gearbox. Devices are designed to meet AGMA, OSHA, ANSI, IEC, DIN, EU, and ATEX standards and requirements. Also featuring reversible rotation, they are available in right angle and parallel shaft configurations, and with variety of seal options.
|
Engineered Polyolefin Material exhibits low CLTE values.Solvay Engineered Polymers
Auburn Hills, MI 48326
Jul 26, 2007
Resistant to dimensional change with varying temperature, SEQUEL® 1828 polyolefin features coefficient of linear thermal expansion (CLTE) of 3.5 x 10(-5) mm/mm/°C. Material exhibits minimal anisotropy, and flow properties enable material to fill large, thin, and complex molds during injection-molding cycles. Able to be completely recycled without significant loss of properties, material suits applications that require tight tolerances, dimensional stability, and impact resistance.
|
Ceramic Substrate suits thick-film applications.CoorsTek
Golden, CO 80403
Jul 25, 2007
Designed to address miniaturization and higher-power applications, DuraStrate consists of fine-grained (1.5-2.0 micron) microstructure material optimized for biaxial flexural strength, consistent thicknesses, camber flatness, and aged adhesion. Ceramic substrate material is designed for optimal performance in very thin (10-15 mil) varieties of thick-film substrates.
|
Business Cards are optimized for double-sided printing.Avery Dennison Office Products
Brea, CA 92821
Jul 23, 2007
Designed for use with ink-jet, monochrome laser, and color laser printers, Clean Edge Two-Side Printable Business Cards feature clean, smooth edges that promote professional look and feel. Coating on both sides is optimized for acceptance and display of color graphics and clear text. Product may be used in conjunction with Avery Design and Print Online tool, which walks users through design process to help create unique and creative business cards.
|
Static Elimination Brush removes static holding dust/powder.Westmont, Inc.
Minerva, OH 44657
Jul 19, 2007
Suited for applications requiring combination of contaminant removal and static dissipation, Anti-Static Brush has standard bristle length of ½ in. Available in sizes of 12, 15, 18, 24, 36 and 48 in. lengths, conductive nylon fiber static elimination brush helps sweep material off surfaces. Holes can be drilled or tapped in metal channel holding fibers allowing for permanent mounting to web-fed or conveyor operated lines needing static dissipation.
|
Cleaner/Degreaser protects metal parts from corrosion.Cortec Corp.
St. Paul, MN 55110
Jul 17, 2007
VpCI(TM)-418 LM non-foaming, heavy-duty alkaline cleaner/degreaser is suited for cleaning industrial, oil field, commercial, marine equipment, and parts. It contains Vapor phase Corrosion Inhibitors (VpCI(TM)) and is nitrite-free, non-toxic, and silicate free. Able to remove heavy hydrocarbons, greases, drawing, and buffing compounds, as well as mill and machinery oils, it leaves no residual film and will not affect paint adhesion qualities.
|
Ceramic Material is suited for jigs and brazing fixtures.Morgan Technical Ceramics
Fairfield, NJ 07004
Jul 17, 2007
Resistant to chemicals, oxidation, wear, and thermal shock, M120F Aluminum Silicate can be machined into intricate shapes and held to close dimensional tolerances. Formulation facilitates machinability in product's green state, and working temperature is rated up to 1,150°C. Product is fully fired at high temperatures to create hard ceramic material, which makes it suited for use in brazing, alloying, soldering, welding, and glass sealing.
|
Adhesive Printing Media enables risk-free transfers.Hexis USA LLC
Corona, CA 92880
Jul 17, 2007
Suitable for solvent and eco-solvent inkjet printers, HX102CG1 consists of clear cast 2 mil vinyl with embossed liner carrying structured adhesive. Product stays repositionable during application for transfers without bubbles onto vehicles, corrugated surfaces, and other difficult substrates. It comes in 54 in. wide rolls in lengths of 148, 328, or 656 ft.
|
Corrosion Inhibiting Powder protects ferrous metals.Cortec Corp.
St. Paul, MN 55110
Jul 16, 2007
Designed for wet or dry corrosion protection of ferrous metals and aluminum, VpCI 609® Biodegradable Powder creates monomolecular inhibiting layer on metal surface that lasts for up to 24 continuous months. Water-soluble Vapor phase Corrosion Inhibitor (VpCI(TM)) powder does not contain nitrites or phosphates and can be applied in dry form by dusting, fogging, or sprinkling or in aqueous form by spray, brush, flush, or immersion.
|
 Stainless Steel Tube Insulation protects workers from heat.UFP Technologies, Inc.
Georgetown, MA 01833 2107
Jul 13, 2007
Made from ZOTEK® F closed cell foam based on Kynar® PVDF, T-Tubes® are chemically resistant up to pH12, require no jacketing, and withstand temperatures from -55 to +311°F. Insulation exceeds ASTM E84 requirements with flame spread index of 5 and smoke developed index of 5. Clamshell design and overlapping adhesive tape closure afford one-step installation, protecting personnel working around hot processing lines. Material is suited for clean processing environments.
|
DUV Lamp Subsystem features short wavelength operation.Energetiq Technology
Woburn, MA 01801
Jul 12, 2007
Saturn(TM) DUV (Deep Ultra Violet) Lamp Subsystem offers an operating wavelength range of 170-400 nm to eliminate electrical/heat damage in thin-film and surface processes. System features include compact housing, debris-free electrodeless toroidal bulb design, integrated power supply, internal water cooling, and re-circulating nitrogen cooling to avoid toxic ozone production. Light source is suitable for photoprocessing and cleaning applications.
|
Kits minimize steps involved in RT-PCR protocol.Thermo Fisher Scientific
Waltham, MA 02454
Jul 12, 2007
Verso(TM) cDNA synthesis kits and one-step reverse transcription-polymerase chain reaction (RT-PCR) kits combine reverse transcription enzyme, priming options, and optimized buffers to generate full length cDNA. They utilize Verso RT Enzyme that offers dynamic range for maximized sensitivity, allowing users to detect wide range of starting template concentrations. Several kit options are available to meet users' specific needs.
|
Metal and Mold Cleaner contains no global-warming compounds.Slide Products, Inc.
Wheeling, IL 60090
Jul 11, 2007
Used as alternative to trichloroethylene and methylene chloride, NEXGEN biodegradable metal and mold cleaner is suited for oil-spill cleanup and remediation; ink, tar, and adhesive removal; and silicone and lithium grease removing. It is formulated from citrus and vegetable products, leaves no oily residue, and rinses away with water. Cleaner is not hazardous air pollutant, non-corrosive, and not SARA reportable.
|
Sealant Films suit retort pouch and lidding applications.Toray Plastics (America)
North Kingstown, RI 02852
Jul 11, 2007
FDA-approved cast polypropylene sealant films include CPP ZK100 film that features low haze, non-whitening, and stress-crack resistance for retort pouch constructions. CPP CF9501 sealant film for retort lidding with secure, easy-to-peel lamination can be used on polypropylene containers. Exhibiting heat seal and impact strength, films withstand sterilization temperatures up to 135°C. Both can be combined with polyester films such as Barrialox aluminum oxide-coated films.
|
Process Aid targets chemical pulping applications.Dow Corning Corp.
Midland, MI 48686 0994
Jul 10, 2007
Dow Corning® AF-7500 PulpAid Concentrate is high solids emulsion formulated from advanced silicone antifoam compound technologies and complies with FDA and BfR indirect food contact recommendations. Silicone antifoam concentrate is designed for easy dilution with either tap water or demineralized water along with antimicrobial agent to produce stable, low-solids emulsions.
|
Concrete Chute Vibrator is designed for Ready Mix trucks.Vibco, Inc.
Wyoming, RI 02898
Jul 10, 2007
Offered in 3 models, Chute Vibrator facilitates moving of low slump and pervious concrete and enables operators to pour at low angles on any terrain without raking. Product can be used for any front- or rear-discharge mixer truck, regardless of power supply, to promote efficient charge hopper loading and help reduce loading and clean-up time. Models include Silent Pneumatic Turbine Vibrator CHV-25, Lightweight Silent 12-Volt DC Vibrator CHV-6, and Pneumatic Piston Vibrator CHV-501.
|
 Electric IR Boost Oven utilizes fast-response heaters.David Weisman, LLC
Stamford, CT 06903
Jul 05, 2007
Fast Response Electric Infrared Boost Oven System lets users boost temperatures of liquid or powder coated on small, medium, and large 3D products prior to entrance to hot air/convection oven. Equipped with electric IR heaters and controls, modular design allows for addition of more heated height and/or air recirculation system. System can be used as stand-alone complete cure oven or as boost system in conjunction with existing hot air/convection oven.
|
Dispersion Filler Aid performs in wet and dry processes.Dow Corning Corp.
Midland, MI 48686 0994
Jul 05, 2007
Multifunctional siloxane Z-6173 Filler Dispersion Aid improves material compatibility and is hydrophobic to reduce water absorption. Material requires no pre-hydrolysis or catalysts. With viscosity lowering effect on molten compounds, Z-6173 is suitable for use with silica, mica, wollastonite, glass, natural fibers, talc, calcium carbonate, and ferrous metals.
|
Chilling/Heating Dry Bath handles 2 separate temperatures.Torrey Pines Scientific, Inc.
Carlsbad, CA 92010
Jul 02, 2007
Two-Position EchoTherm(TM) Model IC22XT can run 2 separate temperatures and 2 different sample blocks simultaneously. Suited for freezing, chilling, or heating biological samples from -20 to +100°C, digital system features built-in data logger, 30-day countdown timer with alarm, and RS232 interface. It can be used with accessory sample blocks for 0.5, 1.5, and 2.0 ml centrifuge tubes, PCR tubes, and plates; 96-well and 384-well assay plates; 2.0 ml vials; and most test tube sizes.
|
(Showing headlines 2061 - 2080) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195
|
|
|