SWD Urethane Co.    Mesa, AZ 85210
Aug 12, 2011 Designed to work with Graco E-8p Reactor, Quick-Shield 106 ZH is both ICC and CCMC approved and has passed SPF smoke and flame test, ASTM E-84 at 4 in. Open cell ½ lb foam also carries GREENGUARD Children and Schools certification, so it is certified to have low VOCs and contain no formaldehyde, helping to create healthy indoor living environment.

GJ Chemical Co., Inc.    Newark, NJ 07105
Aug 10, 2011 Custom-blended to application requirements, GJ Therm provides freeze/burst and corrosion protection in closed heating and air conditioning systems. This industrial coolant and heat transfer fluid, comprised of inhibited ethylene and propylene glycol, is compatible with all manufacturers. Inhibitors remain at full strength despite system dilution requirements, and formula allows mixing with existing systems and topping off or adding to existing fluids without issues.

C. W. Brabender Instruments, Inc.    South Hackensack, NJ 07606
Aug 10, 2011 Equipped with 2.5 hp sensor-less vector drive with built-in torque overload protection, Electrically Heated Prep-Mill® features variable roll speed of 0-30 rpm and adjustable gap from .005-.195 in. System utilizes 4 x 8 in. Acrotherm TK400 coated transfer rolls polished to mirror finish. In addition to operator trip bar over mill rolls, 2 operator kick plates will also stop drive when actuated. Prep-Mill® operates at temperatures up to 260°C with accuracy of ±1°C.

Westfall Mfg. Co.    Bristol, RI 02809-2721
Aug 09, 2011 Westfall Static Injection Mixer, used for blending corrosive chemicals such as chlorine dioxide, has orifice pattern that mixes via combination of alternate vortex shedding and intense shear zone turbulence to achieve greater than 98% dispersion within 10 diameters downstream. Constructed from titanium, zirconium, or Hastelloy®, inline fixed plate mixer, offered in 2-120 in. dia sizes, can be designed for simultaneously injecting up to 6 chemicals.

Surface Guard, Inc.    Aurora, IL 60504
Aug 05, 2011 Featuring slight difference in adhesion strength, Surface Guard® 132 and 133 provide temporary protection of painted metals and plastics. Both feature polyolefin film coated with water-based acrylic adhesive system, and exhibit low adhesion build over time when used with stainless steel, polycarbonate, acrylic, painted metal, and bright aluminum surfaces. When protection is no longer needed, products are removed with quick release. Sizes range from 1-80 in. W in roll lengths up to 15,000 ft.

CRC Industries, Inc.    Warminster, PA 18974
Aug 04, 2011 When added to fuel, CRC® MOTOR TREATMENT cleans fuel injectors, carburetor jets, intake valves, and pistons. It also lubricates upper cylinders, cures hesitation and pings, and restores power and pick-up. When added to oil, multitasking additive liquefies built-up gum and varnish and releases carbon deposits. It cleans sticky valve lifters, piston rings, and PCV systems slowly, during vehicle operation, to prevent chunks of sludge from clogging oil flow.

NBE    Holland, MI 49424
Aug 04, 2011 Featuring 10 in. solid mainshaft and double-ribbon agitator design, integrated bulk material handling system feeds, meters, and blends free-flowing dry bulk material and liquid minor ingredients. Dual bulk bag unloaders with 4 x 4 x 5/16 in. structural framework have 4,000 lb frame capacity each and meet/exceed ANSI and ASME specifications. Additional components include bulk bag conditioning systems, 304-2b stainless steel liquid supply tank, and 250 ft³ capacity blending hopper.

Saint-Gobain ADFORS    Albion, NY 14411
Aug 01, 2011 Designed to reinforce joints for seamless drywall finishing, FibaTape® Extra Strength Tape has fiberglass open mesh design, which provides protection against mold and eliminates blisters and bubbles. Self-adhesive product, available in 2 3/8 in. x 250 ft rolls, requires no pre-bedding coat. It is suited for applications that require additional strength, including vaulted ceilings, arches, halls, and veneer plaster jobs.

IDI Composites International    Noblesville, IN 46060
Jul 29, 2011 Consisting of single and hybrid chemistries using polyester, vinyl ester, polyurethane, and epoxy resins, Engineered Structural Composites experience little or no degradation in extreme hot and cold temperatures, making them suited for most demanding industrial and outdoor environments. Products maintain rigidity, resist corrosion, and can be molded using variety of standard processes and tools. Composites are available as both Sheet Molding Compounds and Bulk Molding Compounds.

Kl???ckner Pentaplast of America, Inc.    Gordonsville, VA 22942
Jul 29, 2011 Meeting needs of medical form-fill-seal and tray applications, Pentamed® MD-EK10R00 Films protect sterilized contents against damage and breach of sterile barriers. High glass-transition temperature allows for heat resistance that slows aging while speeding validation and sterilization. Sterilization chamber temperatures are not limited by package so there is minimized risk of warping and sticking. For every 10°C increase in EtO chamber temperature, sterilization time can be cut in half.

TAKK Industries Inc.    Cincinnati, OH 45247-2238
Jul 28, 2011 Constructed of Thunderon® microfibers with thousands of conductive points causing ionization and grounding of static charges, Anti-Static FlexCord removes static electricity from moving webs, conveyors, and parts. Non-sparking product can be precisely positioned, mounted in confined spaces, and used in hazardous locations. Available in 32.5 ft rolls, FlexCord stretches to approximately double its length allowing it to be pulled taut and protecting material from flow snags.

Hobart Brothers Co.    Troy, OH 45373-2900
Jul 28, 2011 Available in both 1/16 and 5/64 in. diameters, self-shielded Fabshield® 79T8(TM) and 79T8 Ni2(TM) provide out-of-position welding capabilities and generate fast-freezing, self-peeling slag to minimize clean-up time. Low temperature impact values keep welds ductile and prevent cracking. Fabshield 79T8 provides Charpy V-Notch (CVN) property of 135 lb-ft at -40°F/°C for 5/64 in. diameter, while Fabshield 79T8 Ni2 offers 96 lb-ft CVN for same diameter at same temperatures.

Ambrell    Rochester, NY 14546
Jul 27, 2011 Featuring 250 kW of power and center frequency of 10 kHz, EKOHEAT 250/10 utilizes flameless, non-contact method that is conducive to process repeatability. Unit is suited for shrink fitting pipe, annealing wire, and preheating steel bars prior to welding, as well as hardening, preheating for forging, and crucible heating.

OK International    Garden Grove, CA 92841
Jul 27, 2011 With dual switchable output, standalone Model MFR-1300 enables user to swap grip on hand-piece from standard pencil-grip to pistol-grip style to meet variety of application requirements. Power supply features internal pump that provides 21 in. Hg of vacuum suction force combined with Smartheat® Technology, which delivers productivity-boosting response and control, simplifying through-hole soldering and ensuring products are safe from damage.

XEI Scientific Inc,    Redwood City, CA 94063
Jul 26, 2011 Evactron® CombiClean(TM) facilitates control and operation of multiple plasma radical sources for column and desktop cleaning of specimens for electron columns used in SEMs, TEMs, and FIBs. With integrated controller and vacuum chamber, operator can select which PRS is active via system front panel and switch between column cleaning and desktop de-contamination of parts destined for use in microscopes. Dry nitrogen purging prevents back streaming after plasma cleaning and during sample storage.

Culligan    Pickerington, OH 43147
Jul 25, 2011 Designed to minimize accumulation of harmful scale in equipment caused by iron, calcium, magnesium, and manganese ions, HE Water Softener can be customized with Culligan Smart Controller, which lets users monitor water treatment equipment's performance, consumable usage, and equipment maintenance needs. Digital Aqua-Sensor® adjusts to influent water conditions, signals need for regeneration based on resin bed exhaustion, and controls duration of regeneration cycle.

Teknor Apex Co.    Pawtucket, RI 02861
Jul 22, 2011 Featuring bio-based content level of 90%, Terraloy® BP-39070 Series is biodegradable, offering alternative to petrochemical-based resins in applications where sustainability and compostability are critical considerations. Typical grade exhibits heat distortion temperature of 100°C and Izod impact strength of 69 J/m. FDA-compliant compounds replace PS and PP in high-heat thermoformed sheet for microwavable frozen food trays, hot beverage cup lids, and carry-out containers.

Karl Schnell, Inc.    New London, WI 54961
Jul 22, 2011 KS Cutting System provides flexible emulsifying solution for products incorporating extreme cold and high viscous raw materials to low-viscosity emulsions. Cutting set configuration simultaneously handles grinding, emulsifying, dispersing, and homogenization. Along with control over product temperature, system excels in extracting protein from meat to provide higher binding capabilities and provides constant degree of emulsification for consistent product quality.

Allen Engineering Corporation    Paragould, AR 72451
Jul 21, 2011 Powered by GX690 (688 cc) air-cooled Honda gas engine, MP 235 Edger employs heavy-duty drive train, standard-duty gearboxes, and two 4-bladed, 36 in. dia, non-overlapping rotors. Torque converter clutch system gives operator full variable speed control (to 145 rpm) of rotors, and rotating guard rings let operator run along edges of walls as well as around columns and pipes to achieve clean finish. Other features include manual steering and electric-powered spray system.

Rush Machinery, Inc.    Rushville, NY 14544
Jul 21, 2011 Available in manual or semi-automatic version with PLC control, Model FC-700 is designed for truing and dressing of flats, angles, and radii on diamond and CBN single wheels and multiple wheel packs up to 28 in. diameter, with option to 42 in. diameter. Machine features heavy-duty one-piece cast iron base, computer-driven vision system, and 2-axis DRO for measurement. System allows magnification levels from 15-60x as standard, or 30-120x as option.