Automated Packaging Systems Inc.    Streetsboro, OH 44241
Nov 02, 2007 Designed for packaging products with high gloss finishes or surfaces that are sensitive to scratching or abrasion, NSCR film contains no anti-block additives. Low density polyethylene film features embossing technique and non-abrasive properties. Available in Autobag® bags-on-a-roll configurations and compatible with all Automated Packaging Systems bagging equipment, product is suited for eyewear, jewelry, and electronics applications.

Prairie Technology Group, Inc.    Hutto, TX 78634
Nov 02, 2007 Formulated to produce long-lasting repairs to fiberglass molds, RAPID PATCH repair paste can be feathered out after curing for less than 20 minutes at 75ºF. It chemically bonds to damaged mold sections, and offers sag resistance even when applied to vertical surfaces. Based on methylmethacrylate (MMA) chemistry, fast-curing paste can also be used for filling plastic, steel, and aluminum substrates that require patching.

Hytrol Conveyor Co., Inc.    Jonesboro, AR 72401
Nov 01, 2007 Suitable for operations with frequent layout changes or for manufacturers that need to quickly change process lines, Model E24 resolves issues such as heat dissipation, limited motor life span, lack of sufficient torque, and inability to use 1 3/8 in. rollers. Maintenance is minimal and drive motors run only when needed. Conveyor is also available with EZ-Logic technology, featuring dynamic zone accumulation.

Systematic Automation    Farmington, CT 06032
Oct 31, 2007 Used for curing inks, adhesives, and coatings, Ultra Light Advanced Ultraviolet Curing System provides 400 W/in. of UV power and is controlled by touch screen panel. It accepts iron additive lamps, along with standard mercury vapor lamps, and utilizes method for uniformly cooling lamp and lamp reflector housing. Safety devices include non-conductive and grounded cables to irradiator as well as built-in main power disconnect and internal temperature sensors.

Rubbermaid Commercial Products LLC    Winchester, VA 22601
Oct 30, 2007 With capacity to clean 850 square ft/fill, Rubbermaid Pulse(TM) Floor Cleaning System carries 21 oz of cleaning solution on-board and is refilled automatically with Rubbermaid Pulse(TM)Caddy. Microfiber system has ergonomic trigger handle that delivers 3 streams of cleaning solution whenever needed, and full-length view windows to see how much liquid is left. Quick Connect frame facilitates switching to 11 or 24 in. Rubbermaid microfiber frame.

DuPont Co., Packaging & Industrial Polymers    Wilmington, DE 19898
Oct 26, 2007 Utilizing extremely small particles of titanium dioxide to absorb UV light, DuPont(TM) Light Stabilizer 210 protects plastic and anything it covers from sun's damaging rays. Product works by absorbing UV rays and changing them into small amounts of heat, which dissipates quickly without damaging plastic. Additive is suited for use in sporting goods, outdoor furniture, fabrics, and carpet fibers, as well as plastic films and sheeting to protect plants in greenhouses.

Sandmeyer Steel Co.    Philadelphia, PA 19116
Oct 26, 2007 Stocked in plate thicknesses from 3/16-2 in., SSC-6MO (UNS N08367) superaustenitic stainless steel contains molybdenum in excess of 6%. It is suited for corrosion-resistant applications in seawater and other areas where material failure might occur due to chloride pitting or crevice and stress-corrosion cracking. Product may also be used as substitute for certain nickel alloys, including Alloy 20, 825, Alloy G, 625, and C276.

Sandmeyer Steel Co.    Philadelphia, PA 19116
Oct 26, 2007 Stocked in plate thicknesses from 3/16-3 in., 410S (UNS S41008) general-purpose 12% chromium stainless steel features restricted carbon, non-hardening formulation that helps prevent cracking when alloy is exposed to high temperatures or in as-welded condition. Areas of use include petroleum refining and petrochemical processing, mining, and thermal treatment industries' as well as infrastructure applications.

Sonoco E-Corestore.com    Hartsville, SC 29550
Oct 26, 2007 Suited for short rotary press runs and point-of-purchase displays, Revo(TM) Rotary Die Boards are made almost entirely from recycled paper and water-based resin. They are dimensionally stable and offer lifecycle of more than 100,000 impressions. Boards provide environmentally friendly alternative for steel-rule rotary cutting dies.

Dymax Corp.    Torrington, CT 06790
Oct 25, 2007 Designed for use in radiation-cured adhesives and coatings, Ultra-Red(TM) fluorescing technology remains naturally clear until exposed to UV light. It then fluoresces bright red to permit accurate bond-line inspection. Red fluorescence does not absorb same light energy wavelengths as those used to cure adhesive and can be used by manufacturers for product authentication. When measured, technology produces unique energy peak that cannot be reproduced by any other fluorescing compound.

Munson Machinery Co., Inc.    Utica, NY 13503
Oct 24, 2007 At 11 in. high, model 15X15-SS reduces agglomerates and friable materials being discharged from process equipment, storage vessels, and shipping containers. Material entering 15 in.² inlet is reduced by dual rotors with 3-point, single-piece, stainless steel breaking heads rotating inside curved, perforated bedscreen. On-size material exits through apertures in bedscreen from 1/32-2½ in. dia. Powered by 3 hp motor, synchronized shafts rotate at 100 rpm to avoid heating product.

ON Semiconductor, LLC    Phoenix, AZ 85008
Oct 24, 2007 Model ESD9L single-line ESD protection device offers 0.5 pF capacitance and clamps input ESD waveform of 15 kV per IEC61000-4-2 standard, to less than 7 V in nanoseconds. It integrates ultra-low capacitance pin diodes with high-power TVS diodes into monolithic die. Designed for high-speed data lines in portable applications such as cell phones, MP3 players, PDAs, and digital cameras, device fits in SOD-923 package measuring 1.0 x 0.6 x 0.4 mm.

Newson Gale, Inc.    Lakewood, NJ 08701
Oct 24, 2007 Featuring TRI-Mode(TM) technology, code-compliant Earth-Rite RTR(TM) system ensures safe static grounding during transfer of flammable products to or from tanker truck. Electronics confirm positive connection between truck and RTR system, confirm positive connection between truck and ground, and monitor both connections throughout process. Transfer cannot begin until all 3 modes are confirmed as safe, and transfer will be interrupted if system senses connection resistance over 10 ohms.

Thalesnano Nanotechnology    Budapest Zahony u 7  Hungary
Oct 24, 2007 Based upon current H-Cube® technology platform, H-Cube Midi(TM) flow reactor is designed to fulfill requirements of process scale flow hydrogenation, and is validated with several chemistry applications. Reactor helps increase capacity of H-Cube® up to kg quantities per day. Product allows optimization and transition from mg scale to kg levels to be performed within day.

Spectronics Corp.    Westbury, NY 11590
Oct 23, 2007 Offering inspection range of 30 ft, MAXIMA(TM) ML-3500 Micro Discharge Light can be used with fluorescent dyes to detect leaks in lubrication, fuel, ATF, power steering, coolant, hydraulic, and air conditioning/refrigeration systems. Model ML-3500RS is connected to fully retractable, self-ratcheting flying reel with 35 ft cord for assembly line inspections, while flood lamp Model ML-3500FL is suited for wider beam inspection. All are available in 120, 230, 240, and 100 V versions.

DuPont Co., Packaging & Industrial Polymers    Wilmington, DE 19898
Oct 22, 2007 Featuring inherent flame resistance that will not diminish through laundering, bleaching, or wear, DuPont(TM) Protera(TM) fabrics are engineered to protect against electric arc hazards. They meet NFPA 70E Category 2 and National Electrical Safety Code (NESC) requirements while promoting comfort for electricians in industrial segments as well as utility workers. Garments made with this material do not require special laundry processing.

Tri-Mack(TM) Plastics Manufacturing Corp.    Bristol, RI 02809
Oct 22, 2007 Tri-Mack Maxton® H-3 is thermoplastic friction/wear material for producing journal- and plane bearings, vanes, seals, thrust washers, piston rings, and related parts. Able to be custom molded and machined with ±.0005 in. tolerance in complex shapes from 1/8 x ¼ in. up to 24 in. dia., material exhibits 26,400 psi flexural strength, 17,800 psi tensile strength, 3.9 psi x 106 flexural modulus, 2.9 W/MK thermal conductivity, and is non-abrasive for use against stainless steel and aluminum.

Arcmelt    Bridgeton, MO 63044
Oct 19, 2007 Used to form Overlay Composite Structures (OCS), complex metal alloys can subsidize or replace protective metal welds and extrusions found in environments subject to extreme heat, corrosion, and wear. Multiple metal and non-metal powders with other elements are custom-engineered into high-performance alloys designed to overcome limitations of binary and ternary alloys. One such OCS material, used for protecting gasification equipment, is W/Cu/Ni/Co/Fe/Cr/Ti/Sn.

Ampacet Corp.    Tarrytown, NY 10591-5130
Oct 17, 2007 Blue Edge(TM) imbues clear PET bottles with blue halo around their periphery while enhancing bottle brightness and providing soft glow in ultraviolet light. Since its impact is not based on pigment, product does not hinder light transmission; product visibility remains unchanged. Applications include bottles used for clear products such as water, liquor, and other beverages as well as cosmetics and health and beauty aids.

Air Products & Chemicals, Inc.    Allentown, PA 18195
Oct 16, 2007 Suited for global architectural and industrial coatings, low-VOC EnviroGem® 360 boosts low-energy substrate wetting, lowers foam, and minimizes film forming temperature and coating defects, all without contributing to VOC content. Product does not contain alkylphenol ethoxylates, which are persistent in environment and suspected of being endocrine disruptors.