MIRATECH Corporation    Tulsa, OK 74145
Dec 03, 2007 Models NEXT(TM) and VORTEX(TM) substrate catalysts work with round and rectangular catalyst elements respectively. These models feature porous design to fosters resistance to telescoping, and increased catalyst performance while still accommodating back pressure limits. NEXT(TM) substrate utilizes foil grooves to interrupt air flow and create more turbulence for metal-pollutant mixing. VORTEX(TM) substrate uses angled overlapping channels to create similar airflow turbulence.

GRABNER INSTRUMENTS Messtechnik GmbH    Wien A-1220  Austria
Dec 03, 2007 Suited for field or offshore use, MINIHYD determines water content of crude oil and other petroleum products as well as liquids, gases, and powders. It measures amount of electrolysis current necessary to produce required amount of iodine and, using ACE control system, ensures that electrolysis current and count rate are synchronized. Solution complies with multiple industry standards and comes with built-in printer and battery.

Cleveland Vibrator Co., The    Cleveland, OH 44113
Nov 30, 2007 Model CVT-P 10 miniature turbine vibrator is manufactured with acetal high-strength, low-friction plastic that resists wear in wet and dry environments. With operating range of 5-80 psi, unit offers quiet operation and is suited for application in environments that require use of material compliant with FDA standards.

Modern Process Equipment, Inc.    Chicago, IL 60623
Nov 30, 2007 IMD 8 Chia Seed Gran-U-Lizer(TM) achieves fine powder grinds on numerous oil seeds, including chia seed, without elevating product temperatures, turning seeds into paste, or incurring product stickiness or gumming. System features that are beneficial to oil seed producers include water-cooling, self-cleaning teeth, and wash-down construction.

OK International    Garden Grove, CA 92841
Nov 30, 2007 Designed for Metcal MX-500 Soldering/Rework System, MX-PTZ Precision Tweezer is available with variety of soldering cartridges for reworking discreet and SOIC components. Unit thermally applies heat to end caps of devices while mechanically gripping component during removal. Powered by SmartHeat® Technology, tweezer features double-sided pivot, dual-position pitch adjustment, and fully adjustable tip alignment for both height and rotation.

Ticona Engineering Polymers    Florence, KY 41042
Nov 30, 2007 Manufactured in continuous process, Celstran® Thermoplastic Composites feature unidirectional orientation of reinforcement fibers with full impregnation. Pre-preg tapes are available in 4, 6, 8, and 10 in. wide sizes. By using various thermoplastic matrix materials such as PP, POM, TPU, PPS, and PBT, and embedding fibers such as glass, carbon, aramid, or stainless steel along with additives, material's properties can be tailored to suit specific requirements.

Federal Process Corp.    Cleveland, OH 44128
Nov 29, 2007 Suited for industrial and manufacturing environments, Thred Gard® protects against rust and corrosion. Non-dripping, non-hardening formula is suited for nuts, bolts, bushings, turbines, sleeves, couplings, and other interlocking components. Three types are available, including general-purpose formula for temperatures up to 1,000°F, copper-based formula for temperatures up to 1,800°F, and nickel-based formula for temperatures up to 2,600°F.

J. W. Winco, Inc.    New Berlin, WI 53151
Nov 28, 2007 Measuring ½ in. diameter and available in variety of lengths, Stainless Steel Adjusting Rods are mounted in cross block, which allows both horizontal and vertical positioning of rods. Various styles are available, including blank, grooved, tapped, and milled flat. Applications include conveyors, conveying systems, and various types of equipment in packaging, pharmaceutical, automation, and material handling industries.

ITW Plexus    Danvers, MA 01923 3712
Nov 28, 2007 Two-part 1:1 structural methacrylates are non-sagging gels that dispense manually or with standard meter-mix equipment. They are available in 400 ml cartridges, 5 gal pails, and 50 gal drums. With working time of 30-40 min, MA530 Plexus® structural adhesive fills gaps up to 0.70 in., while MA560-1 offers working time of 55-70 min and fills gaps up to 1.00 in. Formulated for building large fiberglass boats, MA590 has working time of 90-105 min.

Objet Geometries Inc.    Billerica, MA 01821
Nov 28, 2007 Based on PolyJet Matrix(TM) technology, Connex500(TM) offers ability to print parts and assemblies made of multiple model materials, all in single build. System also fabricates Digital Materials(TM) on-the-fly, enabling users to create composite materials that have preset combinations of mechanical properties. Printing 600 x 600 dpi in both X and Y axes, Connex500 enables thin walls down to 0.6 mm, fine details in all dimensions, and smooth surface finish.

Cooper Hand Tools    Raleigh, NC 27612
Nov 27, 2007 Bundled with hot air pencil, soldering iron, desoldering iron, vacuum pencil, and safety rests, Weller WR 3M Repair Station delivers 400 W of power while operating 3 soldering tools simultaneously. Precise temperature control is provided by blend of digital control and heat-transfer with sensor. By connecting tool, users can automatically see tool's setting on large LCD display. USB port and software integrate system with PC for data logging and monitoring.

SABIC Innovative Plastics    Pittsfield, MA 01201
Nov 27, 2007 Lexan DMX polycarbonate films include Lexan DMX 1HD00-112 film that is polished on both sides and Lexan DMX 1HDA3-112 film that is polished on one side and matte on other. Featuring layered construction that utilizes DMX resin, films offer pencil hardness rating of 1H as well as impact, chemical, saltwater, and isopropanol resistance. They can be fabricated with Insert Mold Decoration graphics and be thermoformed to greater than or equal to 35 mm draw depth.

DURR Ecoclean GmbH, Filderstadt Division ? North America    Wixom, MI 48393
Nov 20, 2007 Utilizing several process modules, EcoCSpeed can clean complex geometrical workpieces during manufacturing cycle using non-halogenated hydrocarbon. Cleaning process may include injection flood washing, steam scouring, and vacuum drying. Offering throughput of 2.7 tons/hr, basic version features 5 process modules designed for part/batch dimensions up to 370 x 220 x 200 mm. Inline system can be equipped with additional process modules to ensure 40-sec cycle time.

ChemFree Corporation    Norcross, GA 30093
Nov 19, 2007 Able to hold 550 lb load, SmartWasher model SW-28XE features 2 brush stations with flexible nozzles, adjustable timer with 10 or 30 min continuous flow, adjustable thermostat, 300 gph pump, light kit, and parts basket. System utilizes bioremediation process which combines OzzyJuice® aqueous-based degreasing solution with OzzyMat(TM) specialized particulate trap impregnated with naturally occurring microbes to dissolve contaminants while purifying cleaning solution.

The Kerfkore Company    Brunswick, GA 31525
Nov 16, 2007 Featuring 2-ply construction, econoKORE offers balanced panel that is calibrated for consistent size and thickness. It can be bent and attached to ribbed frame by use of nails and is installed with traditional fabricating tools and methods. Sizes include ¼, 3/8, and ¾ in. thicknesses with MDF core and poplar plywood face in 4 x 8 and 8 x 4 ft panel sizes. Additionally, ¼ and 3/8 in. versions are available with high-density fiberboard face. Boards weigh 1 lb/ft².

Vibco, Inc.    Wyoming, RI 02898
Nov 16, 2007 Bulldog DC-500 Concrete Pump Vibrator features smooth surface, O-ring seal for waterproofing, double-walled construction, and heavy bolts to protect vibrator internal parts, even in tough environments. It is suited for any contractor needing to move concrete and eliminate build-up and spillage associated with concrete pump loading.

Kaivac, Inc.    Hamilton, OH 45011
Nov 15, 2007 KaiFly System combines microfiber window squeegee and motorized sprayer. It was developed to clean countertops, walls, and partitions that contain biopollutants such as bacteria, MRSA, norovirus, and other infectious agents.

Manncorp    Willow Grove, PA 19090
Nov 14, 2007 Featuring semi-automatic design, Auto Dip can process single board or pallets up to 19.3 x 12.5 in. in 2-12 sec. Boards are placed on fixtureless ultra-fine needle bed, which retains PCBs without components being dislodged when dipped into solder bath. Solder is evenly applied while surface tension floats boards at correct wetting height, and built-in motorized skimmer removes dross as needed. Adjustments exist for dwell time, temperature from 220-299 Cº, and dipping angle.

3M Co., Electronic Products Div.    Austin, TX 78726
Nov 14, 2007 Available in 1 in. x 30 ft rolls, Scotch Silicone Rubber Electrical Tape 70 HDT is Class H material and is suitable for 180°C continuous operation. Tape has peak thickness of 20 mil and edge thickness of 8 mil, and features blue center guide line. Made of self-fusing, inorganic silicone rubber, it may be used on terminations operated outdoors or indoors and in areas subject to increased levels of contamination or moisture.

MMD Components    Rancho Santa Margarita, CA 92688
Nov 13, 2007 Meeting MIL-STD-883 and MIL-STD-202 specifications, ultra-miniature quartz crystals have frequency range of 16-60 MHz and operate in temperatures from -40 to +85ºC. RoHS-compliant crystals are hermetically sealed in 4-pad ceramic package and delivered on tape and reel for pick and place. Suited for Bluetooth devices, PDAs, mobile phones, and MP3 players, ruggedized crystals offer frequency tolerance/stability rate as high as ±50 ppm/±100 ppm.