Huntsman Corp.    The Woodlands, TX 77380
Apr 25, 2008 Able to produce PC-like models and prototypes with polycarbonate-like clarity, RenShape® SL 7870 features notched Izod impact strength up to 1.15 lb-ft/in., flexural modulus of 286-333 ksi, and elongation of 10-22%. Impact-resistant, antimony-free liquid is formulated to conform to FDA USP 23 Class VI standards for use in medical modeling and prototyping, and is suitable for use on solid-state laser and SLA® systems.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Apr 24, 2008 Suited for wire tacking, selective sealing, vibration dampening, and rework/repair applications on PCBs, Loctite® 5210(TM) is highly thixotropic silicone material that has dispense times as little as 31 sec (2 connectors) and tack-free time of less than 5 min. Non-corrosive room temperature vulcanization (RTV) silicone material cures at room temperature and will hold its form upon dispense; there is no spreading or migration to other locations where it is not desired.

Guyson Corporation of U.S.A.    Saratoga Springs, NY 12866
Apr 24, 2008 Incorporating touchscreen control panel, Orbit 800 table parts washer has 2 hp vertical seal-less pump that delivers up to 50 gpm of solution at line pressure of 40 psi. It has 750 lb capacity stainless steel wire mesh basket that is 5 in. deep and 31.5 in. in dia at loading height of 31 in. Featuring 54 x 66 in. footprint, unit includes thermostat-controlled 12 kW electric immersion heater that maintains aqueous cleaning solution at desired temperature up to maximum of 180°F.

Westfall Mfg. Co.    Bristol, RI 02809-2721
Apr 23, 2008 Used for blending ethanol and other additives into gasoline and other fuels, Static Mixer is heavy-wall 316 SS fixed plate which features orifice pattern that mixes by combination of alternate vortex shedding and intense shear zone turbulence to achieve greater than 98% dispersion within 10 diameters downstream. Designed to fit inside mating flange bolt circle of any piping system, mixer is available in sizes from ½ to 30 in. dia and features Flexitallic® high-pressure gaskets.

SABIC Innovative Plastics    Pittsfield, MA 01201
Apr 23, 2008 Made without use of brominated or chlorinated flame-retardants, EFR 735 film delivers VTM-0 flame resistance down to 152 microns while also complying with environmental standards. It has matte/velvet finish and is offered in 0.006, 0.010, 0.017, and 0.025 in. gauges. Compliant with existing and upcoming electronics industry standards, thermoplastic film has glass transition temperature of 340°C and exhibits resistance to puncture as well as moisture absorption.

SABIC Innovative Plastics    Pittsfield, MA 01201
Apr 23, 2008 Suited for use in wafer protective devices, Ultra-Pure Transparent (UPT) Stat-Loy 63000CT series can prevent contamination of wafers. Compounds are transparent and permanently antistatic materials that enable IC foundries to leverage argon-fluoride (ArF) lasers to provide fine circuitry down to 45 nm and below. Electrically conductive materials meet cleanliness requirements and exhibit ultra-low outgassing of VOCs and low levels of leachable ions.

Ideal Industries, Inc.    Sycamore, IL 60178
Apr 22, 2008 Incorporating LCD digital terminal with adjustable controls for temperature and air volume, Heat Elite(TM) Plus gives contractors precise values when shrinking pipe, bending PVC, or soldering wires. Temperature can be adjusted in steps of 10°F from 180-1,200°F, while gun's air volume is controlled in five ± steps from 7.0-17.5 cfm. To assure safe usage, gun includes double-insulated power cords, non-slip handles, balanced weight, and UL/CUL Listings.

Sharpe Mixers    Seattle, WA 98124
Apr 22, 2008 Sharpe M5 Portable Mixers feature all SS construction and are USDA-approved for meat and poultry products. They can be equipped with fractional through 2 hp motors, with shafts in ¾, 1, and 1¼ in. dia in lengths up to 8 ft and with hydrofoil impellers in sizes from 4-16 in. dia. Available in electric and air-operated models, paint-free mixers can include variable speed drives and plate or flange mounts.

Rust-Lick, Inc.    Glenview, IL 60025
Apr 22, 2008 Used to prevent staining during machining process, Rustlick Ultracut AL creates light oil barrier that protects working part and machine from rust. It contains non-chlorinated EP additives as well as boundary lubricants and helps prolong sump life. Product can be used with all metals, including ferrous, non-ferrous, brass, bronze, and copper, but is not recommended for use on magnesium. Biostability makes it resistant to bacteria and fungus.

OK International    Garden Grove, CA 92841
Apr 22, 2008 With ability to operate 1 or 2 handpieces at same time by flip of switch, MFR-2200 Series Soldering and Rework System features SmartHeat® Technology that assures responsive and highly controlled heating. Suited for production hand soldering, touch-up, and SMD rework, it includes cartridge handpiece with various fine access and SMD rework tips, high power soldering tip handpiece, and precision tweezer handpiece that can remove range of components from 0201 chips to 28 mm SOICs.

Cool Polymers    Warwick, RI 02886
Apr 21, 2008 Suited for heat sinks and thermal management solutions, CoolPoly® thermally conductive injection molding grade thermoplastics offer no amplification of electromagnetic or radio frequency interference and no magnetic coupling. E-series is electrically conductive and provides inherent EMI/RFI absorption, while D-series is electrically insulative and produces no signal interference. Features include thermal conductivity of 20 w/mk, thermal diffusivity of 0.1 cm²/sec, and density of 1.7 g/cc.

GrayGlass    Queens Village, NY 11429
Apr 18, 2008 Clear Float Glass (soda lime) comes in sheet sizes from 14 x 14 in. to 96 x 130 in. for use by architects, builders, contractors, and designers for applications that include partitions, glass floor panels, furniture, and doors. Fabricating capabilities include etching, mirror finish, or colored glass machined to design specifications.

Creative Materials Inc.    Ayer, MA 01432
Apr 18, 2008 Resistant to flexing and creasing, Type 125-04 contains silver/copper alloy with sheet resistivity of 25 mW/sq/mil. Applied by screen printing, dipping, and syringe dispensing, it exhibits best properties when cured for several minutes at 150°C. With thermal stability good to 325°C, product has viscosity of 30,000 cps and volume resistivity of 0.000063 W/cm when cured. Applications include RFID antennas, EMI/RFI shielding, and membrane switches.

Omega Engineering, Inc.    Stamford, CT 06907
Apr 17, 2008 Designed for process temperature control, freeze protection, and supplemental heat, HTWAT series tapes offer adjustable thermostat control up to 425°F and are resistant to moisture as well as chemicals. In addition to being suited for electrically conductive surfaces, CE-compliant products can be used on valves, pipe lines, bearings, filter housings, and actuators. Areas of use include manufacturing, construction, petroleum, and public works industries.

Sanmina-Sci Corp.    San Jose, CA 95131
Apr 16, 2008 SuperBC(TM) laminate delivers performance for Buried Capacitance® applications for providing bypass capacitance inside silicon chip packages and high-performance PCBs. It utilizes base 1 or 2 mil BC core onto which additional 8 micron or thinner high Dk dielectric layers are added to form composite capacitance core. Multiple dielectrics can be added to boost bulk planar capacitance values or segregate Power Distribution System by different voltage levels or noise budgets.

Merquinsa North America Inc.    Seabrook, NH 03874
Apr 15, 2008 Pearlbond® ECO D900 TPU (Thermoplastic Polyurethane) grade, for footwear and textile applications, can be processed by extrusion or in powder form via sintering. Non-reactive hot melt adhesive features Oeko-Tex Class I compliance and 75% renewable content. For High Performance Reactive Hot Melts (RHMs), Pearlbond® ECO D590 offers characteristics optimized for green strength and setting/open times. It addresses challenges of water-based adhesives in automotive and furniture industries.

Epner Technology, Inc.    Greenpoint, NY 11222
Apr 10, 2008 Thermal Foil Gold Coating is copper foil that is .001 in. thick, coated with Laser Gold. Laser gold plating reaches reflectivity of greater than 99% at 10 microns and greater than 98% at 1 micron. Optical coating and plating is ISO 9001:2000 certified and suited for automotive, aerospace, medical, R&D, electronic, and IR optical markets.

Excel Scientific Inc    Wrightwood, CA 92397
Apr 10, 2008 Able to withstand temperature from -40 to +125°C, ThermaSeal A(TM) Sealing Film incorporates thick adhesive layer for secure sealing of microplates in PCR and storage applications, such as reagent-handling. Shaped to fit within rim of raised-rim plates for sealing of all wells, polypropylene film can also be used for sealing standard microplates. Each film has 2 removable end tabs that aid in positioning film to plate.

Union Process, Inc.    Akron, OH 44313
Apr 10, 2008 Designed to meet any lab grinding and dispersing need, wet or dry, 1.5 and 2.5 gal 1-S Laboratory Attritors features cryogenic cover to facilitate flow of liquid nitrogen into grinding chamber. Rugged mill attritor incorporates stainless steel tank with stainless steel jacket, and is available with selection of accessories including tank options, agitator arms, covers, and bottom valves. Cryogenic cover and tanks can be retrofitted on to any existing 1-S Attritor.

Motorola, Inc.    Schaumburg, IL 60196 4041
Apr 08, 2008 Utilizing GSM technology, Smart Rider(TM) ensures that users can converse, navigate, and tend to business while on-the-go. It features Bluetooth(TM) technology, multiple user profiles, interactive voice activation, and built-in microphone and speakerphones. Hands-free solution also offers turn-by-turn navigation and voice-guided driving instructions, on-screen directions and detailed maps on 2.8 in. color display, real-time traffic reports, and automatic re-routing.